Dante-enabled Product Catalog

3500 W per channel power amplifier. 3500 W per channel power amplifier.

• High-power performance for top-level tours
• Rugged, lightweight package
• 3500 W per channel (2 Ω)
• Grounded Bridge Class-H design
• Switch-mode power supply
• Microprocessor-controlled
• Front LCD panel for operation-mode setup and monitoring
• Slot for optional RCM-26 IRIS-Net-compatible DSP and control module
• 11-level protection package
• Only 32 lbs (14.5 kg)

2000 W per channel power amplifier. 2000 W per channel power amplifier.

• High-level touring performance
• Rugged, lightweight package
• 2000 W per channel (2 Ω)
• Grounded Bridge Class-H design
• Switch-mode power supply
• Microprocessor-controlled
• Front LCD panel for operation-mode setup and monitoring
• Slot for optional RCM-26 IRIS-Net-compatible DSP and control module
• 11-level protection package
• Only 31.4 lbs (14.2 kg)

The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications. The module can be used in Electro-Voice Tour Grade amplifier models. Installing the RCM-28 turns a conventional amp into a remote amplifier, which, at any time, provides complete overview of the overall system status and control of all system parameters. RCM-28 modules allow the integration of amplifiers into an OMNEO network with up to 100 devices in a single subnet without additional hardware. OMNEO is a media networking architecture for professional applications. Using standard IP Ethernets, media products that integrate OMNEO can be assembled into networks of 2 to 10,000 cooperating devices that exchange studio-quality synchronized multichannel audio and share common control systems. This offers the possibility to control and monitor an entire sound system from one or more PCs using the IRIS-Net - Intelligent Remote & Integrated Supervision - software package. In addition to digital signal processing functions, the RCM-28 also offers a digital audio input (AES/EBU), OMNEO network audio inputs and outputs, and freely programmable control inputs and control outputs.

32 in, 32 out Dante interface card for EV Netmax 32 in, 32 out Dante interface card for EV Netmax Features:

• Connect NetMax to a Dante digital audio network
• Transmit up to 32 ins and 32 outs at 48 or 96 kHz sample rate and 16-, 20-, or 24-bit word-length
• Low latency (typically below 1 ms)
• Two Gigabit Ethernet interfaces for system redundancy
• Status LEDs for each interface
• Dante Zen device-discovery
• Compatible with Dante Virtual Soundcard

The RCM-28 is a dual-channel digital control module with DSP processing capability equivalent to one channel of the Electro-Voice Dx46 system processor. With an RCM-28 module installed, a Tour Grade amplifier’s network and system parameters can be completely supervised and controlled remotely through IRIS-Net. The RCM-28 remote control module is the first EV product to support the new OMNEO media networking architecture. Tour Grade series amplifiers (such as the TG5 and TG7) with RCM-28 modules installed can be integrated into OMNEO networks of up to 100 other devices that operate over standard Ethernet with standardized protocols.

The NetMax N8000 System Controller is a state-of-the-art digital matrix system offering comprehensive management of all aspects of professional sound reinforcement systems. Supporting both distributed and central processing, NetMax is a powerful physical complement to EV's IRIS-Net protocol, which gives designers and end-users the industry’s most flexible routing, DSP, and component-level system control and supervision. EQ, crossovers, dynamics, FIR-Drive loudspeaker optimization — NetMax does it all with superior digital fidelity.