Cart
← Back to Product Catalog

Electro-Voice – TG7

Amplifiers

More details

Similar Products

Crest_Audio_CKd_604_Front_03611450
  • Crest Audio

Crest Audio – CKd 604

The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology. The design centers around an ultra-high efficiency amplifier output circuit that reduces weight while increasing output power, reliability and thermal efficiency. The CKd Series offers four multi-channel models to meet the needs of demanding audio installations. The CKd 1208 and CKd 1204 provide 1,250 Watts per channel in eight and four channels, respectively, while the CKd 608 and CKd 604 provide 625 Watts per channel in eight and four channels. Each amplifier channel will operate to rated power in direct 70-volt, 100-volt, 8-ohm or 4-ohm modes, configurable per channel. CKd amplifiers are networkable through Crest Audio’s Nx Dante-8™ and Nx Cobranet-8 NexSys control modules and either Crest Audio NexSys 5 or Peavey® MediaMatrix® NWare™ software programs for advanced control and audio routing. The Nx Dante-8 and Nx Cobranet-8 modules fit into the rear bay of CKd Series power amps and support all NexSys functions, DSP functions and Dante digital audio I/O (via 1 Gigabit Ethernet connection) or Cobranet digital audio I/O (via 100baseT connection). A Control Voltage input is included on each channel to allow external gain control, while the Fault output on each channel allows the CKd power amps to be wired to other monitoring systems. In addition, users can conserve energy by disabling channels that are not in use. The CKd Series includes Crest Audio's exclusive ACL™ (Active Clip Limiting), which automatically reduces gain at the onset of clipping to prevent amplifier and load damage, and IGM™ (Instantaneous Gain Modulation), which monitors load current to protect against overloading.
    Amplifiers
  • Dante Ch: 8x8
See the product
panasonic-wp-dn700|panasonic-wp-dn700
  • Panasonic Connect

Panasonic – WP-DN700

The WP-DN700 is a digital amplifier with high efficiency and high reliability design.  The 2U size achieves a total output of 2000 W or more in total.  Digital amplifier with high efficiency and high reliability design. 
  • WP-DN 700 is 2 ch power amplifier with maximum output 1000 W × 2 (4 Ω load). 
  • Due to the adoption of class D amplifier circuit and switching power supply, power loss is greatly reduced and space saving is realized. 
  • Equipped with a muting circuit to prevent pop noise when turning on / off the power switch. 
  • Overcurrent protection circuit that prevents overdrive in case of overload · output short circuit, equipped with overtemperature protection circuit to prevent abnormal heating of the power supply circuit · output circuit. 
  • Speaker protection circuit protects the speaker by cutting off the output when the output circuit fails. 
  • Equipped with protect indicator lights, inform the operating status of the protection circuit and system oscillation (when signals exceeding 20 kHz are continuously input). 
  • Corresponds to EIA rack mount. 
  • BTL (Bridged Trans- connect) connection that uses output of 2 ch as output of 1 ch can be used as a power amplifier of 1120 W × 2 (8 Ω load) with WP-DN 360.
    Amplifiers
See the product
  • STTEK

DCS-AMP12004

The DCS-AMP12004 is a high-performance power amplifier that combines Class-D amplification technology with an SMPS switched-mode power supply and is designed for large-scale audio system applications. Its compact size, low power consumption, and high efficiency deliver reliable performance for demanding installations. Intelligent power sharing further enhances system flexibility by dynamically allocating available power across channels for maximum utilisation. One of the key strengths of the DCS-AMP12004 is its intelligent power sharing capability. A total output of 1200 W can be flexibly distributed across four channels, with up to 600 W available per channel. This allows the system to adjust channel output dynamically according to actual load requirements, avoiding the inefficiencies associated with conventional fixed-power designs. It is particularly well suited to complex applications such as public address systems, multi-zone music systems, airports, metro systems, nuclear power plants, and sports venues.    
    Amplifiers
  • Dante Ch: 4x4
  • 16-bit
See the product