Electro-Voice - NetMax Dante Audio Module DM-1

Electro-Voice – NetMax Dante Audio Module DM-1

Product Information

32 in, 32 out Dante interface card for EV Netmax

Features:

Connect NetMax to a Dante digital audio network
Transmit up to 32 ins and 32 outs at 48 or 96 kHz sample rate and 16-, 20-, or 24-bit word-length
Low latency (typically below 1 ms)
Two Gigabit Ethernet interfaces for system redundancy
Status LEDs for each interface
Dante Zen device-discovery
Compatible with Dante Virtual Soundcard

MONISMS – Dante I2S Module card MNS-DANTE-I2S-R-01-1P

MNS-DANTE-I2S-TR-XX-1P DANTE I2S AUDIO RECEIVE / TRANSMIT MODULE [ Dante to I2S and I2S to Dante ], Which can be easy integrated into your products. Create a unique selling proposition and differentiate your product with rapid and flexible customization.
[Model:MNS-DANTE-I2S-R-01-1P]: For networked audio receiver products requiring 1 channels at 44.1 kHz, 48kHz, 88.2kHz and 96kHz [ 16, 24 or 32-bit ] sample rates.

Dante Interface Cards

See the product

DirectOut

DANTE.MILAN.SRC.IO

DANTE.MILAN.SRC.IO is a dual audio network module for the PRODIGY Series and MAVEN.A to interface with 64 channels each of Dante and MILAN* streams. One module, two audio engines Hosting two audio network boards the module offers 2 x 64 of two different audio protocols - Dante and MILAN*. This allows to interface with two audio protocols in a single A Slot of MAVEN.A or PRODIGY.MC. With the two A Slots of a PRODIGY.MP the coverage can be extended by a third or even fourth audio protocol. Sample Rate Conversion Individual HD SRC for bi-directional sample rate conversion is on board as a standard. The PRODIGY and MAVEN Series also offers low latency sample rate conversion (FastSRC) for input and output. The two audio network boards can be operated at different sample rates. Dual network modules ensure a seamless connection across clock boundaries and different audio protocols on a single module.

Dante Interface Cards

See the product

Kingray

Kingray – MDT44_E2

4 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

I2S digital audio format

Freely set the sampling rate and equipment name

Network audio transmission and control use standard Category 5 network cable (CAT5) by 2*RJ45

Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats

Dante Interface Cards

See the product

Electro-Voice – NetMax Dante Audio Module DM-1

Product Information

Similar Products

MONISMS – Dante I2S Module card MNS-DANTE-I2S-R-01-1P

DANTE.MILAN.SRC.IO

Kingray – MDT44_E2

Stay connected to Dante

Support

Company

Dante Networking Alliance