Bosch's OMN-ARNIS ARNI-S is an OMNEO interface that provides better scalability through the use of either a DHCP server or DNS server, which extends the use of PTP over multiple subnets. The ARNI-S supports redundancy, and up to 450 OMNEO nodes in a single subnet network, or up to 450 OMNEO nodes in each subnet of a routed network when used in conjunction with an ARNI-E device.
Блок представляет собой звуковой интерфейс локальной сети распространения AoIP сигналов по протоколу Dante.
Блок представляет собой звуковой интерфейс локальной сети распространения AoIP сигналов по протоколу Dante. Он может иметь различное количество входов и выходов нескольких форматов.
Опциональные модули:
Blustream's DA11AU has been designed to convert unbalanced or balanced 2ch analogue audio to Dante® digital signal. The DA11AU allows any non-Dante® audio source such as mixing consoles, amplifiers, computers, and Blustream Matrix or distribution products to be connected as a source within a Dante® network. The DA11AU is a plug & play device that is powered using PoE (Power over Ethernet) from any PoE network switch and supports AES67 RTP audio transport.
The AVN-DIO01 is a Dante AoIP network to analogue XLR stereo output converter in the Sonifex DIO range of Dante input/output devices. It features two balanced analogue XLR outputs and one Neutrik EtherCon® connector for direct connection to a Dante AoIP network. The D/A circuitry offers >120dB of dynamic range - ten times better than similar competing products.
All Sonifex DIO interfaces provide a simple, convenient, and elegant plug and play method of connecting legacy analogue and digital audio equipment to the Dante AoIP audio network.
All DIO products use Dante Controller for configuration and are powered by PoE (Power over Ethernet). They use rugged aluminium boxes with side slots for screw-mounting and contain superior audio circuitry for optimal audio performance. All feature rugged Neutrik EtherCon® connectors and Neutrik lockable audio connectors for ultra-reliable connectivity.
BR-4*4IO Dante audio converter box is equipped with 4 line/mic inputs, phantom power and balanced audio output. The gain, phantom power and mute on each input can be debugged by software. Dual backup network port design, external power supply. With many high-quality features, and no design, no need to learn. Provides a complete audio processing solution for the optimization of specific locations and systems. Suitable for Dante audio conversion to upgrade the traditional audio system.
The AVN-AO16 audio converter and interface converts up to sixteen analogue outputs from the Dante Audio-over-IP networking standard. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All analogue outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for POE, Link, and Clock.
The DN43 microphone interface is a key part of the Audix Dante | AES67 Integrated Microphone System, the fast, trouble-free way to stream Audix audio performance through Ethernet networks. High-quality audio and all microphone functions - including on-off contact closure and LED status indicators - are available through a single CAT5 - CAT7 cable with RJ45 connections at both interface and microphone. This simple configuration eliminates wiring errors, accelerates installation, and reduces cost.
The DN43 features one microphone input specifically designed for the Audix M3 tri-element microphone and one input for Audix RJ45-equipped, single-element microphones. It has two 5V logic outputs per port, with source/sink capability for LEDs that are controlled by network-connected DSPs. Low-pass and high-pass filter settings are available on each audio channel, as are eight selectable gain levels, with all settings configurable via software.
Audio Features
Dante Features
Power Features
The AoDoM 2 channel provides one RJ45 Dante input and two Neutrik NC3MXX-BAG series black XLR analog outputs. Using our rugged aluminum extrusion channels and hand soldered, 3 ft. analog audio tails, ProCo AoDoM modules provide simple connection of analog equipment to a Dante network and provide studio-quality, low-latency audio via the XLR connectors. Comaptible with any Dante ecosystem and provides line level analog audio signal to output devices.
The DN4 microphone interface is a key part of the Audix Dante | AES67 Integrated Microphone System, the fast, trouble-free way to stream Audix audio performance through Ethernet networks. High-quality audio and all microphone functions - including on-off contact closure and LED status indicators - are available through a single CAT5 - CAT7 cable with RJ45 connections at both interface and microphone. This simple configuration eliminates wiring errors, accelerates installation, and reduces cost.
The DN4 features four inputs for Audix RJ45-equipped, single-element microphones and two 5V logic outputs per port, with source/sink capability for LEDs that are controlled by network-connected DSPs and one logic input per port for buttons. Low-pass and high-pass filter settings are available on each audio channel, as are eight selectable gain levels, with all settings configurable via software.
Audio Features
Dante® Features
Power Features
E-Vocal DUO is a dual channel analog input or dual channel analog output Dante converter. It consists of three models:
E-Vocal ARS-0002-A01 converts a Dante ® stream into two channels of analog audio output signals. The two audio signal outputs of ARS-0002-A01 allows Lip-Sync delay of up to 170 ms/ch (fs = 48 kHz) to synchronize the audio stream to the video stream. The delay control switch on the E-Vocal ARS-0002-A01 can add delay in the range of 0~170ms by 32 increments. It can be powered by PoE or 5VDC via Micro USB connector. More info: https://www.aristaproav.com/product/duo/
Pinanson's Press Splitter SA SMC DANTE is a Press Splitter with Dante input plus analogue audio.
Features
Models
The APB-112 SB-D is an active, portable, AudioPressBox unit, 1 channel DANTE input, 12 LINE/Mic outputs.
E-Vocal DUO+ is a dual channel analog input and dual channels analog output Dante converter.
The product consists of four models:
E-Vocal ARS-0202-B11 connects your legacy audio gear to the Dante ® world. It allows two channels of audio analog inputs to be integrated into a Dante ® network and converts a Dante ® stream into two channels of analog audio output signals. It has two XLR microphone inputs with an adjustable gain control preamplifier for studio quality fidelity and low noise performance dynamic or condenser microphones. Two audio signal outputs allow Lip-Sync delay of up to 170 ms/ch (fs = 48 kHz) to synchronize the audio stream to the video stream. It has a built-in web-based controller for microphone gain control and Lip-Sync delay control. It has an SFP connector for a Fiber interface if you choose to extend the connection distance and can be powered by 12VDC. Dante DUO+ has a rubber protection shell and rack mount brackets as optional items. More info: https://www.aristaproav.com/product/duo-plus/
Monacor's DRM-884 is s general solution for versatile multi-room PA concepts with fixed installations in hotels, restaurants and bars, conference rooms, schools, sports and fitness centres.
The matrix system DRM-884 is a professional tool with extensive features which easily meets any requirement: users can combine signal sources, play one source in several zones or several sources in one zone, adjust the volume in each zone and much more. The audio matrix router DRM-884 is the heart of the system which is able to distribute a maximum of 8 analogue and 4 digital audio sources to just as many output zones, any assignment possible. You can either connect active speakers or a power amplifier with passive speakers to the output zones via Phoenix terminals.
The multifunctional matrix system is controlled via wall panels: modules DRM-884VAP and DRM-884VP allow you to remotely access, e.g. level and program selection in the different zones. The wall panel DRM-884IOP allows for other connection options are available, e.g. at the location of the PA application. The zone paging microphone DRM-884RC with zone selection can be connected for announcements.
Expand your options with the matrix system: if you need a larger number of inputs and outputs, the system can be extended from a maximum of 16 x DRM-884 and optional Dante® module to 192 inputs x 192 outputs by means of cascading.
With the Dante® extension module DRM-884DTM, the DRM-884 can quickly and easily be inserted into a Dante® audio network. For this purpose, there are an additional 8 digital inputs or 8 digital outputs available which can be assigned to either an analogue output or a Dante® channel.
E-Vocal MYRIAD are multiple channel analog input and analog output Dante converters. There are two models that make up the E-Vocal MYRIAD product:
These models are 1U rack mount analogue converters designed to transfer 16 or 32 analogue audio channels over a Dante network in both directions. Space-saving 25-pin D-sub connectors are provided for use with optional breakout boxes to input and output balanced line-level analogue audio signals. Two etherCON connectors (Dante Primary/Secondary) are available for redundant operation using two separate networks. For high availability operation requirements, dual AC input and dual PoE power sources are available for redundant operation. The units feature indicators for operation status and current sample rate as well as overload LEDs for each input and signal LEDs for each input and output. Any other settings, such as sampling frequency, channel routing or latency, can be made by the free “Dante Controller” computer application. The sampling frequency, power source status, will be displayed on the 2×20 character display located on front bezel. More info: https://www.aristaproav.com/product/myriad/
The Just Add Power 3G+ Dante® Sound System Transmitter adds compatibility with Dante® and AES67 audio networks to the UltraHD over IP system.
Input up to 8 channels into the Dante® network. Extract up to 8 channels from the Dante® network, embed onto the HD over IP signal, and distribute across the Just Add Power network. Mix-and-match! The 3G+ Dante® Sound System Transmitter is fully compatible with all 2GΩ/3G and 3G devices. Not just for Dante®. AES67 compatibility for interoperability with other leading audio-over-IP technologies.
E-Vocal MYRIAD are multiple channel analog input and analog output Dante converters. There are two models that make up the E-Vocal MYRIAD product:
These models are 1U rack mount analogue converters designed to transfer 16 or 32 analogue audio channels over a Dante network in both directions. Space-saving 25-pin D-sub connectors are provided for use with optional breakout boxes to input and output balanced line-level analogue audio signals. Two etherCON connectors (Dante Primary/Secondary) are available for redundant operation using two separate networks. For high availability operation requirements, dual AC input and dual PoE power sources are available for redundant operation. The units feature indicators for operation status and current sample rate as well as overload LEDs for each input and signal LEDs for each input and output. Any other settings, such as sampling frequency, channel routing or latency, can be made by the free “Dante Controller” computer application. The sampling frequency, power source status, will be displayed on the 2×20 character display located on front bezel. More info: https://www.aristaproav.com/product/myriad/
The PRU basically serves as a audio router with up to 4 interfaces with 64 channels each in a 19"/1RU case. Every single input can be routed to one or many outputs using the EmBER+ interface. For each of the 4 interfaces the protocol can be chosen to be either Dante (Audinate's Brooklyn II) or SMPTE-2110 (Ross Video's Liberty). The built-in sample rate converters allow therefore up to 4 independently synchonized clock domains to be connected to the PRU. Using two of each module type, a 128-channel bridge between Dante and SMPTE-2110 can be formed. Optionally PRU can be extended by a central intercom matrix. The 256x256 matrix is fully equipped with summing and level adjusting features.
E-Vocal DUO+ is a dual channel analog input and dual channels analog output Dante converter.
The product consists of four models:
E-Vocal ARS-0202-A11 connects your legacy audio gear to the Dante ® world. It allows two channels of audio analog inputs to be integrated into a Dante ® network and converts a Dante ® stream into two channels of analog audio output signals. It has two XLR microphone inputs with an adjustable gain control preamplifier for studio quality fidelity and low noise performance dynamic or condenser microphones. Two audio signal outputs allow Lip-Sync delay of up to 170 ms/ch (fs = 48 kHz) to synchronize the audio stream to the video stream. It has a built-in web-based controller for microphone gain control and Lip-Sync delay control. It has an RJ45 copper network interface and can be powered by PoE or 12VDC. Dante DUO+ has a rubber protection shell and rack mount brackets as optional items. More info: https://www.aristaproav.com/product/duo-plus/
With the GPIO module (GPM) GPIO signals can be attached to a Dante network. In potential free configuration 4 in and out can be used, in refrerence to a common potential up to 8 GPI / GPO's are available. The module is PoE powered (13W).
E-Vocal DUO+ is a dual channel analog input and dual channels analog output Dante converter.
The product consists of four models:
E-Vocal ARS-0202-B00 connects your legacy audio gear to the Dante ® world. It allows two channels of audio analog inputs to be integrated into a Dante ® network and converts a Dante ® stream into two channels of analog audio output signals. It has an SFP connector for a Fiber interface if you choose to extend the connection distance. It is powered by 12VDC. Dante DUO+ has a rubber protection shell and rack mount brackets as optional items. More info: https://www.aristaproav.com/product/duo-plus/
The headset module (HSM) enables an attachment of a stereo headset into a Dante network. Either dynamic or electret microphones can be used. The headphone power level can be individually adjusted for left and right channel. With a power boost switch an additional gain of 9dB can be set for noisy environments. The module is PoE powered (13W).
The POE DANTE/AES67 Audio Amplifier Modules MNS-AMPMC30XXA-1P, Built-in to your 4-8 ohm speaker, that instantly Dante-enables your speakers.
Dante Audio Amplifier module that drives small 4-8Ω speakers.
The MONISMS Dante Amplifier Modules Power 30W, 4-8Ω load.
The module's audio input is via an Ethernet audio network.
MNS-AMPMC30XXA-1P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.
[Model:MNS-AMPMC3011A-1P] 1 Channel, 30W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMPMC3012A-1P] 1 Channel, 2*15W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMPMC3022A-1P] 2 Channels, 2*15W Output, [2 Pairs Speaker Terminals].
The POE DANTE/AES67 Audio Amplifier Modules MNS-AMPMC30XXA-2P, Built-in to your 4-8 ohm speaker, that instantly Dante-enables your speakers.
Dante Audio Amplifier module that drives small 4-8Ω speakers.
The MONISMS Dante Amplifier Modules Power 30W, 4-8Ω load.
The module's audio input is via an Ethernet audio network.
MNS-AMPMC30XXA-2P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.
[Model:MNS-AMPMC3011A-2P] 1 Channel, 30W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMPMC3012A-2P] 1 Channel, 2*15W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMPMC3022A-2P] 2 Channels, 2*15W Output, [2 Pairs Speaker Terminals].
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
Activation instructions:
