Cart
← Back to Product Catalog

Arista – ARS-0202-A11

I/O Interfaces

Similar Products

shure-ANI4IN-XLR_600px|shure-ANI4IN-XLR_600px
  • Shure

Shure – ANI4IN-XLR

New ANI4IN and ANI4OUT devices can bring up to four wired microphones onto or from a Dante network for easy audio routing and browser-based connectivity. New ANI4IN and ANI4OUT devices can bring up to four wired microphones onto or from a Dante network for easy audio routing and browser-based connectivity. Both new Microflex Advance array microphones are fully digital for networked set-up, management and control on Dante™ networks.
    I/O Interfaces
  • Dante Ch: 0x4
  • 24-bit
See the product
Vittoria 64 DR
  • Glensound

Vittoria 64 DR

The Vittoria provides a bridge between two internal and separate Dante and  Ravenna networks. These networks are completely isolated from each other with 100% network security, providing a complete network firewall. Vittoria links 64 channels from each network directly in DSP, allowing the passing of bi-directional audio but with complete isolation and security from each separate network. As each network is isolated, they can operate asynchronously and at different sample rates from each other without any problems. Each network can operate at sample rates from 44.1 kHz up to 96kHz. Features:
  • Provides a firewall between a Dante & Ravenna network interface
  • Acts as a bridge bi-directionally with Dante and AES67/Ravenna Networks
  • Acts as an interface between Dante and full SMPTE ST2110-30
  • 64 input and output channels at sample rates up to 48kHz
  • 32 input and output channels at sample rates up to 96kHz
  • The two networks can operate asynchronously or at different sample rates
  • Support for 44.1-96kHz
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
See the product
cadac-mc-dante-network-bridge_600px
  • Cadac

Cadac – CDC MC Dante Network Bridge

The CDC MC Dante V2 is a 1U Dante to MegaCOMMS audio network bridge enabling Dante units to be incorporated within a MegaCOMMS audio network. The unit now features A and B Dante ethernet ports with redundancy. It can operate at either 96 kHz or 48 kHz and can handle up to 64 inputs and outputs. The CDC MC Dante V2 is a 1U Dante to MegaCOMMS audio network bridge enabling Dante units to be incorporated within a MegaCOMMS audio network. The unit now features A and B Dante ethernet ports with redundancy. It can operate at either 96 kHz or 48 kHz and can handle up to 64 inputs and outputs. The MC Dante also has on-board sample rate conversion for all 128 channels, as well as its own independent word clock with audio connections via co-axial. Dual PSUs come as standard to ensure secure performance in critical network applications. As with the CDC MC MADI unit, the co-axial ports glow either red or blue for Rx (receive) or Tx (transmit) – enabling fast and accurate configuring of the MegaCOMMS network especially in low light.
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
See the product