Dante-enabled Product Catalog

The A168D Stage is a portable 16 input 8 output I/O Expander, again using the Dante network protocol to provide additional I/O anywhere on a network. It comes with 16 mic preamps on XLR inputs with Phantom Power status LEDs and 8 XLR line outputs with direct preamp control from the 4REA4 controller software. It runs at 48k and 96k and is AES67 compatible. Primary and secondary ports again come with locking EtherCON connectors and can run in redundant or switched mode.

Using a modern, full-featured Bluetooth 5.0 chipset allows the xIO Bluetooth to offer extended range, a stable connection, and world-class audio quality. Available in US/EU form factors, the xIO Bluetooth has a clean, sleek design compatible with standard single gang US wall boxes with Decora faceplates, as well as EU/UK standard wall boxes.

IP/PoE simplify installation by allowing a single cable from the xIO Bluetooth to a PoE enabled network switch. The xIO Bluetooth may be configured for media-only, phone bridge, or both, and can be controlled using Symetrix remotes, SymVue panels, or third-party control systems.

The xIO Bluetooth is a fully integrated member of the Symetrix xIO family of Dante endpoints allowing full control and configuration of the device, including Dante routing, from within Symetrix Composer™ software. The xIO Bluetooth is fully configurable including the Bluetooth friendly device name, Dante channel names, connect/reconnect functionality, and security.

Stand alone 12 input 12 output Dante connection. Featuring four analog, four AES/EUB and four Dante inputs. With flexible routing to four analog, four AES/EUB and four Dante outputs, over an eight channel matrix (four in, four out). Ready to go with all the benefits of Dante like discovery, pass though generic routed networks etc. Indication of the signal present and peak on each input and output channel for each signal flow tracking. Balanced inputs and impedance matched output for balanced inputs in downstream devices. Dual Ethernet connections, control over OSX and iOS or windows XP, 7 and 8.

A scalable new interface that combines RADAR analog cards and Dante® connectivity

DANTE 8i8o is an 8-in 8-out cobranet network audio interface machine. It follows the DANTE network audio standard to meet high-demand professional audio signal transmission. Supports 8-channel microphone/line analog audio input and 8-channel balanced analog signal output. Each input channel supports independent 48V phantom power supply and independent gain control. The open TCP/IP and RS232 control protocols allow third-party software to control the analog gain and 48V switch.

PENTA 721s is a new generation audio router and audio distribution interface from NTP Technology, which provides a versatile and flexible interface for signal distribution of analog, and digital audio via AES/EBU and MADI, as well as routing via IP Gigabit Ethernet and optical fibre networks including Dante. It has all the features of the Penta 721 with the addition of a card slot that can accept one of the 7 Penta interface cards to exactly match your I/O requirements.

PENTA 721s is a compact 1U digital audio interface designed for stand-alone use in recording studios, radio stations and stage venues.

It comes as standard with the following I/O:

• Eight channel AES/EBU input/output channels
• MADI in/out
• Two IP Audio Ethernet in/outs connected to a 64-channel Dante interface, with support for AES67 with SAP & Dante Domain Manager
• Card slot for one of seven optional NTP I/O and processing cards, and a slot for optional Dual MADI Module

The AoDDP wallplates provide one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors. Compatible with any Dante® ecosystem and provides line level analog audio signal to output devices. AES67 compliant. The rugged enclosure also fits inside a standard 2 gang deep well J-Box for easy retrofit installations.

• ProCo - AoDDP 4XM
• ProCo - AoDDP 4XF
• ProCo - AoDDP 2XF2XM

SAS is well known for it’s history in high capacity, long-term reliable audio routing. Today, the tradition continues with the Core 64 Router, a 6 rack unit modular routing system with high capacity I/O and cost-saving, compact design. The Core 64 provides a backbone for the SAS digital audio network with modular Dante AoIP, Long Distance Codec, AES, and Analog cards; numerous DSP engines; audio and power redundancy. Numerous Core 64 frames can be combined to provide hundreds of thousands of routable I/O. The Core 64 is effectively utilized in TV and Radio broadcast, surround sound live stage performances and in high volume venues such as football and soccer stadiums.

· Compact design, easy to use, supports hot-plug;

· Easily and freely convert between analog audio signal and DanteTM digital audio signal;

· Built-in 2 input or 2 output audio channels;

· Extends audio, control, Ethernet, and power over a single affordable network cable.

· Replaces multiple analog or multi-core cables with only a network cable, cost-effective, versatile;

· Extends uncompressed high-quality audio signal with near-zero latency;

· Transmits high quality 2-channel audio safely and reliably;

· Perfectly supports Dante software, the network and audio routing can be easily expanded andreconfigured with just a few mouse clicks;

· DI22/DO22 supports PoE,and conforms to ieee 802.3af line power supply function, DU22 supports USB power supply;

· Built-in lightning & surge protection;

S-Track offers three models of adpaters:

• Ostrich DI22 - 2CH XLR - Dante Output
• Ostrich DO22 - 2CH XLR - Dante Input
• Ostrich DU22 - 2CH USB Dante Adapter

THE DANTE BOX THAT’S BUILT TO LAST
Since 1946, Switchcraft products have been known for their durability, and this new Dante box combines that approach with the latest Dante technology. Rugged rubber corners protect the Switchcraft XLRs outside and high quality electronics inside while maintaining a compact and lightweight form factor.

The SD104QA is a 4-Channel Analog XLR Out Box

Dante™ Network Audio Interface for digiMIX18 mixer - 1 per mixer - field installable

ATEN VE66DTH is a Dante-enabled six−input/six−output Audio Interface with HDMI. Using Dante™ – the most popular audio networking solution created by Audinate, the VE66DTH is capable of delivering uncompressed, close-to-zero latency digital audio signals across your standard IP network. Key features include:

• Features Dante™ networked audio interface – a complete audio networking solution that distributes uncompressed, multi-channel audio transmission via standard Ethernet networks, with near-zero latency and perfect synchronization
• Integrates up to 6-channel balanced mono audio Line/Mic input signals onto a Dante-enabled audio system and supports both dynamic and condenser microphones
• Delivers up to 6-channel balanced mono audio Line outputs from the Dante network to the audio system
• Supports HDMI 2.0 input with HDCP 2.2 compliant & HDMI 2.0 local output

The BR-10V4 network audio server is a system that can freely design audio, processing, control and network switching POE power supply. It uses advanced DSP processing technology, with new automatic mixing, feedback cancellation and other algorithms, to solve various practical problems in application scenarios. The built-in Dante module provides a high-bandwidth, low-latency, high-compatibility, and low-cost solution for network audio transmission. Through the modular software operation, it is more concise and bright. Simply click the mouse, which greatly simplifies the operation difficulty. Provides 6 network ports, supports PoE, 10 / 100M self-adaptation, 100 meters transmission distance, IEEE802.3at, single port maximum power 30W, 12/36 power supply. Easily meet the high-quality voice needs of local network sound reinforcement, recording, broadcasting, interconnection and remote interactive education.

The BR-106D network audio processing center is a network audio processor with 128 digital inputs and 128 digital outputs. It can operate normally on the dante audio network and can control each channel through a computer. The backup network port is more humane in design. The first 16 input / output channels can all be processed by DSP. Its fire-fighting linkage function and rich control interface make this BR-106D better fit various field systems.

BR-108D digital audio processor is an audio processing and control system that can be designed freely. It uses advanced DSP processing technology, with new automatic mixing, feedback cancellation and other algorithms, to solve various practical problems in application scenarios. Since most of the control is operated through software, the appearance can be more concise and clear. The operator only needs to click the mouse gently, and no longer needs to adjust the complex large-scale mixer on the spot to complete the function conversion as before, which greatly simplifies the operation difficulty.

The NetSpire™ Network Audio Controller (NAC) is an intelligent, network enabled digital audio controller with integrated power amplifiers, digital signal processing, digital voice announcement, analogue input and output and digital I/O control signals. The device supports a large number of integrated functions greating reducing installation cost and system footprint.

The NetSpire™ NAR4c is a compact unit providing software controlled digital audio switching between all audio inputs and outputs. The unit provides four digital audio network inputs and outputs, in addition to four balanced audio inputs and outputs. The unit also has eight digital isolated inputs and outputs for external control.

Two versions of the NexSys Nx-8 Network Audio Interface modules are available supporting Dante and CobraNet steaming audio protocols. Both cards deliver eight (8) channels of streaming audio to Crest Audio networkable power amplifiers.

The Q-SYS™ Core 110f processor is the latest addition to the Q-SYS™ Core family providing a fully integrated audio, video and control solution for small, single-room projects up to the largest Enterprise scale deployments.

Features

• Class leading I/O: Core 110f has 24 I/O + USB, POTS and VoIP simultaneously offering the best cost to I/O ratio in a single SKU, single chassis product available on the market.
• 8 Flex Channels: Nearly all the flexibility of a card-based DSP solution without the hassle of multiple SKU’s and custom ordering.
• True IT Software Integration: The Q-SYS Software Ecosystem is a true IT integrative solution that is free of the fixed hardware limitations seen in competing products. It allows for greater functionality such as Layer 3 routing, LDAP contact server integration, SNMP monitoring, and more.
• Suite of Software-Based Conferencing Technology applications: Built and owned by QSC from the ground up allowing for continued refinement, without any additional hardware. The suite includes next generation acoustic echo cancellation (AEC), multiple-instance SIP softphones, gain sharing and gating automixers.
• Unified Software Platform: The integrator has a single training investment in one software design tool rather than needing to learn several platforms to scale from small to large systems.

Connect to Q-SYS Reflect Enterprise Manager

This processor can be automatically connected to your Q-SYS Reflect Enterprise Manager, a powerful monitoring and management platform for the Q-SYS Ecosystem.

1. Maxim up to 256 output zones in one system.
2. Both master amplifier and extension amplifier have total 360W output power and 6 output zones.
3. Backup amplifier is available for both master amplifier and extension amplifier. Automatically switched to backup amplifier when master one faults.
4. The communication between master amplifier and extension amplifier is base on DANTE network.
5. Maximum up to 32PCS of Emergency MIC or paging MIC configured simultaneously as well as 128 priority level setting involved.
6. Automatically fault detected: speaker Line/Control input connection/ device local fault etc.
7. Record the fault event/ emergency operation log automatically.
8. Automatically alarm audio message or normal audio message broadcast is available in this system.
9. DC24V backup power port.
10. BGM player with timer function.
11. Integrated with VOIP system for telephone broadcast function.
12. Easy to set up the system with PC software.
13. Relevant functions are compliant with Chinese fire regulation. System controls the master, can realize following extension functions if used with this device together.
- Running status of system display
- Audio input port extension: (Optional input module)
- Audio output port extension:(Optional output module)
- 2-way BGM sound voice or 1-way BGM sound source&1-way real-time records (Optional BGM module).
-VOIP telephone broadcast function (Optional VOIP module)

- Linkage with fire system such as ADS etc.

Dante DSP 0404 Transmitter is designed for Dante network audio transmission and routing transfer of high quality and low latency network audio transmissionin multimedia systems.

DSP 0404 has analog channels of 4 balance input and 4 balance output. It can also provide phantom power for your microphone, as well as mute and gain adjustment on PC controlling software.

Features:

1. PoE power supply & DC12V power supply
2. Built-in Dante module
3. 4 balance input + 4 balance output
4. 48V phantom power supply
5. Windows software included

Dante Panel series wall-mounted interface machines boast analog input and Dante digital input, analog line output and Dante digital output. The analog inputs support phantom power and manual preamp-gain adjustment. It is suitable for conference rooms and other professional applications. It available in black and white color.

The BR-108B network audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.

This Dante adapter is designed with one RJ45 Dante input and two XLR analog outputs. This product enables simple connection of analog equipment to a Dante network, and can  receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analog audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor(DSP), or other analog audio equipment.

Analog output version:Dante signal turns into analog audio signal output, when connecting an amplifier, a speaker, etc.

Analog input version: analog audio signal turns into Dante signal output, which is suitable for mixer, instrument, etc.

As with other Dante products, the freely available Dante Controller software application is used to automatically discover and configure Dante analog output module to the Dante network. Device names, channel labels, signal routing and other parameters(for example, sample rate and latency) can be configured via the network using Dante Controller. A variety of network and clock synchronisation diagnostic tools are also available in Dante Controller.

This Dante adapter uses Power over Ethernet(PoE). Power can be provided from a PoE-capable network switch, or from a separate PoE injector.

This Dante adapter is designed with one RJ45 Dante input and two XLR analog outputs. This product enables simple connection of analog equipment to a Dante network, and can  receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analog audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor(DSP), or other analog audio equipment.

Analog output version:Dante signal turns into analog audio signal output, when connecting an amplifier, a speaker, etc.

Analog input version: analog audio signal turns into Dante signal output, which is suitable for mixer, instrument, etc.

As with other Dante products, the freely available Dante Controller software application is used to automatically discover and configure Dante analog output module to the Dante network. Device names, channel labels, signal routing and other parameters(for example, sample rate and latency) can be configured via the network using Dante Controller. A variety of network and clock synchronisation diagnostic tools are also available in Dante Controller.

This Dante adapter uses Power over Ethernet(PoE). Power can be provided from a PoE-capable network switch, or from a separate PoE injector.

BR-102A network audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.

The BR-108A network audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.