Shure – AD4Q


More details

Similar Products

attero-tech-unD6IO|attero-tech-unD6IO
  • Attero Tech by Q-SYS

Attero Tech by Q-SYS – unD6IO

A 4-in, 2-Out I/O Interface that is a convenient, cost-effective way to add up to 6 channels of Dante audio to an existing Dante-based networked audio system. INPUTS - 2 XLR input with switchable mic/line gain and switchable phantom power on the inputs. Choice of unbalanced input (RCA or 3.5mm stereo jack) selectable by software. OUTPUTS - 1 3.5mm output, and two balanced outputs on a side‐mounted depluggable connector with software controlled volume. CONTROL - Audio flow assignment, input gain, phantom power and unbalanced input selection are all controllable via the Dante network connection.
    I/O Interfaces
  • Dante Ch: 2x4
  • 24-bit
  • Turtle AV

CHAZY 4K Wall Plate TX

The Decora Style Chazy 4K Tx Wallplate is offers both HDMI and USB-C video Tx, making it the ultimate solution for boardroom tables and has USB power pass through so you can power a laptop, tablet or other device from a USB wall plug, while still powering the Chazy via PoE.
    I/O Interfaces
  • Dante Ch: 2x2
  • Dante AV Enabled
equipson-dd4
  • Equipson

Equipson – DD4

DD4 devices are gateways used to convert DANTE (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network.

DD4 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors.

It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.

    I/O Interfaces