Cart
← Back to Product Catalog

NTP – Penta 721s

I/O Interfaces

More details

Similar Products

24e8ec993ef49ab61859625561a6fa7b
  • Lectrosonics

Lectrosonics – M2T

The M2T half-rack transmitter houses two stereo transmitters to provide two stereo audio channels, and for up to four mono audio channels in a single rack space. The audio inputs can be individually configured to be analog or Dante compatible. The analog input connectors are full-size XLR/TRS combo types for balanced line-level analog signals while the input preamp circuits use a special balanced amplifier with very high common mode rejection to minimize hum and noise.

A Dante™ Ultimo™ interface via dual RJ45 connectors accepts Dante networked audio inputs and can daisy chain the digital stream to additional units via CAT6 cables. An additional RJ45 jack provides an Ethernet connection for programming and control via Wireless Designer™ software and a USB jack on the front panel allows for firmware updates. The transmitter features a full color, backlit LCD for high visibility in any environment, while the chassis is all-metal and can be racked singly or in pairs using included rack mount hardware. 

    I/O Interfaces
  • Dante Ch: 4x4
  • 24-bit
See the product
Dante官网logo
  • BARE

BARE – DC-34

Features： 1. The integration of power over Ethernet and audio data transmission realizes simplified cable layout and conforms to Ethernet engineering specifications; 2. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 3. The built-in DSP network active speaker can remotely monitor and control the EQ of the active speaker, the voltage and current at both ends of the speaker on the PC side. 4. The sound column is made of wooden box body, sandblasted surface treatment, the sound is loud and powerful. 5. Automatically assign IP address through router DHCP; 6. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network 7. It has perfect protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 8. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.
    I/O Interfaces
See the product
musicrown-DF1208MN_1200px|musicrown-DF1208MN_1200px
  • Musicrown

Musicrown – DF1208MN

32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.14x12 channels whole sound mixing matrix design, including 8 local analog input channels, 8 local analog output channels, 4 Dante network input channels and 4 Dante network output channels, 1 AUX internal sound mixing channel, 1 double effector internal marshaling channel. 32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.14x12 channels whole sound mixing matrix design, including 8 local analog input channels, 8 local analog output channels, 4 Dante network input channels and 4 Dante network output channels, 1 AUX internal sound mixing channel, 1 double effector internal marshaling channel. Fully supports scalable DANTE digital network audio card and AEC automatic echo noise cancellation card, the users can freely configure and choose according to their requirements. Dante digital network audio card configuration is a double standard network interface, which fully supports the function of unite switching and hot backup, hardware system can distinguish automatically, can use immediately when it inserts. Software internal and local analog signal can realize fully sound mixing matrix processing. Each channel has independent DSP processing function.
    I/O Interfaces
See the product