Dante-enabled Product Catalog

Cloud's CV Series Dante Cards are available in three models - CDI-CV2, CDI-CV4, CDI-CV8

• 2, 4, and 8-channel Dante input option cards

• Support for 44.1kHz, 48kHz, 88.2kHz and 96kHz sample rates

• Dante AES67 interoperability mode

• 1Gbps Ethernet (CDI-CV8) or 100Mbps Ethernet (CDI-CV2 / CDI-CV4)

• Dante redundancy or Ethernet switch modes (CDI-CV8)

• Dante Domain Manager (DDM) ready

• Flexible channel input routing via Amplifier DSP configuration

The ANX44 is a Dante audio network interface for installation in the XMP44 professional modular audio system, featuring four input and four output channels.

The installation of this optional module allows the XMP44 to be integrated into any DANTE enabled AV network and flawlessly transfer digital audio with any compatible product on the market. The bidirectional audio exchange with the 4 SourceCon™ interface card slots allows distribution of the audio stream from the installed modules, allowing any radio tuner, media player, internet radio or other audio source distribution throughout your Dante network. A truly plug & play solution is created when linking multiple DANTE enabled devices with each other on a standard IP network. It offers self-configuring solutions by using DHCP configuration, while the connection can be made to any existing 100 Mbit or 1 Gbit network infrastructure. Bidirectional signal transmissions with a sampling frequency of 48 kHz and a bit depth of 24 bit are simultaneously possible on all in and output channels, while guaranteeing an incredibly lowlatency with a maximum up to 5 ms. (depending of the network occupation). The ANX44 comes delivered as an installation kit, including all required accessories for integration into the XMP44 chassis. Installation shall be performed by qualified technicians.

DSP LOTO is a 1-2 in/4 out processing board specifically designed to provide advanced DSP functions to any powered product. DSP LOTO is a 1-2 in/4 out processing board specifically designed to provide advanced DSP functions to any powered product. Featuring the same characteristics of the high-end X Series platform, LOTO delivers up to 2 sec of input delay, multi-layer input and output EQ, parametric raised cosine filters, custom FIR and IIR equalizers, as well as TruePower™, RMS and Peak limiters, Active DampingControl™, and Live Impedance. Loto is available in 2 different flavors: Basic and Advanced, both of which are completely supported and managed via ArmoníaPlus.

DRM-884DTM is a Dante® module for inserting audio matrix router DRM-884 into a Dante® network.

• Audio transmission via Ethernet using Dante® protocol
• 8 digital inputs and 8 digital outputs
• Easy signal control via network technology
• Mini PCI plug-in board
• Connections: 2 x RJ45

DiGiCo's DMI-Dante 64@96 card is a Dante Interface Card for its 4REA4, S-Series and select SD-Range sound consoles (SD12 and SD7 Quantum). Providing 64 input and 64 output channels at both 48KHz and 96kHz, the new DMI (DiGiCo Multichannel Interface) card is equipped with Primary and Secondary (backup) Gigabit Ethernet ports for connection and uniquely offers a Sample Rate Conversion feature. Natively allowing DiGiCo products to communicate with other devices on a Dante network, the DMI-Dante 64@96 effectively doubles the previous DMI Dante card’s I/O channel count at the higher 96kHz resolution.

Asystems' DT88 is an 8x8 Dante interface card. Asystems offers four audio networking options for network-enabled devices including the DMP, DMA and NT series. These Asystems products, combined with any of these Networking solutions, provides flexible, large-scale operation in all modern commercial installations. Dante Networking cards are available as standard on "D" models of the DMP, DMA and NT series. More info: https://www.asystems-sys.com/index.php/products/audio-switcher/network-matrix-accessories/dt88

Asystems' DT44 is an 4x4 Dante interface card. Asystems offers four audio networking options for network-enabled devices including the DMP, DMA and NT series. These Asystems products, combined with any of these Networking solutions, provides flexible, large-scale operation in all modern commercial installations. Dante Networking cards are available as standard on "D" models of the DMP, DMA and NT series.

https://www.asystems-sys.com/index.php/products/audio-switcher/network-matrix-accessories/dt88

The DANTEx is an optional plug-in card for the Rane Terminal 1010x that allows system designers to integrate a Terminal 1010x processor with Dante-equipped microphones, amplifiers, breakout boxes, mixing consoles and other supported devices. It provides 32 inputs and 32 outputs of Dante digital audio with supported samples rates of 44.1kHz, 48kHz, 88.2kHz and 96kHz. Built-in sample rate conversion (SRC) converts the Dante sample rate to the fixed 48kHz sample rate required by the Terminal 1010x.

The Dante interface is managed using Audinate’s Dante Controller software. Dante controller is a free software application that enables the user to route and configure devices on a Dante network.

The POE DANTE/AES67 Audio Amplifier module MNS-AMPMC230POE, Built-in to your 4-8 ohm speaker, that instantly Dante-enables your speakers. The POE DANTE/AES67 Audio Amplifier module MNS-AMPMC230POE, Built-in to your 4-8 ohm speaker, that instantly Dante-enables your speakers. The MONISMS Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers. The MONISMS Dante Amplifier has two outputs, each with 15W of power into an 4-8Ω load, This makes the module ideal for powering small areas consisting of only a few low power speakers. The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol. MNS-AMP230POE is powered by standard POE+ and has a MAX power of 30 watts [2*15W]. If there is not  POE+  used,  It can used the external 24VDC power supply.

Musicrown's DL Dante Connect Box series is an I/O interface. Musicrown's DL Dante Connect Box series is an I/O interface.

• High quality A/D(24-Bit), D/A(32-Bit) convert, 48KHz sampling rate.
• DL2.2 is 2 channel balanced MIC/LINE XLR input, 2 channel balance XLR output.
• DL2.0 is 2 channel balanced MIC/LINE XLR input.
• DL0.2 is 2 channel balance XLR output.
• Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup. Digital audio channel can support 2IN/2OUT, using 24-bit precision and extremely low network latency.
• Each input channel with independent signal light and gain control, also with +48V phantom power controlled by switch. Input channel 1 has high resistance switch select, support guitar, bass, keyboard musical instruments equipment input; input channel 2 extra with two group stereo input port (pair RCA input and one 3.5 socket), supporting media player, notebook computer and other equipments signal input.
• Each output channel with independent signal light.
• Dante can be used in the standard existing network interchanger, has highly interoperability: perfect cooperation with other start using Dante device.
• Outer connect +12VDC power supply, Power switch independently controlled and power indicator light.

DL Series:

• DL2.2 is 2 channel balanced MIC/LINE XLR input, 2 channel balance XLR output
• ●  DL2.0 is 2 channel balanced MIC/LINE XLR input
• ●  DL0.2 is 2 channel balance XLR output

With the Symphony I/O Mk II Dante option card and a simple ethernet cable, Symphony I/O Mk II can be easily connected and shared across post production, broadcast, live sound or recording studio networks, unleashing legendary sound quality on the world’s most popular audio-over-IP solution.  With the Symphony I/O Mk II Dante option card and a simple ethernet cable, Symphony I/O Mk II can be easily connected and shared across post production, broadcast, live sound or recording studio networks, unleashing legendary sound quality on the world’s most popular audio-over-IP solution. The Symphony I/O Mk II Dante option card also includes Pro Tools connectivity for integration of Pro Tools | HD systems into a Dante network environment. No other Dante-enabled audio interface offers this level of quality, flexibility and modularity.

The Dante 64x64 card offers low latency, high channel count connectivity between dLive systems and Dante networks and devices. With 64 channels of bidirectional audio at 96kHz, the card allows high channel digital splits between systems whilst offering simultaneous multitrack recording via Dante Virtual Soundcard.The front panel Primary and Secondary ports allow simultaneous connection to multiple Dante devices, or dual-cable redundancy with compatible hardware. A dedicated Control Network port is provided for configuration using Dante Controller software.Features

The Dante 128x128 card offers low latency, high channel count connectivity between dLive systems and Dante networks and devices. With 128 channels of bidirectional audio at 96kHz, the card allows high channel digital splits between systems whilst offering simultaneous multitrack recording of up to 64 channels via Dante Virtual Soundcard.The front panel Primary and Secondary ports allow simultaneous connection to multiple Dante devices, or dual-cable redundancy with compatible hardware. A dedicated Control Network port is provided for configuration using Dante Controller software.Features

The DANTE module allows multiple Titan or Atlas units to be connected directly to a DANTE equipped network.   The DANTE module allows multiple Titan or Atlas units to be connected directly to a DANTE equipped network. With this setup, DANTE users can enjoy the excellent sound quality of both the Titan and Atlas A/D and D/A converters, and their equally well regarded on-board microphone preamplifiers. Titan was recently rated 'the pinnacle of USB recording' with 'fantastic converters and mic pre's' by John Gatski, of Everything Audio Network.  Control of the Prism Sound Titan or Atlas units when connected to DANTE is easy. When connected over a network the units are controlled using a dedicated software app that is available for both Mac and Windows. This enables you to control the units from any computer on the network or via its dedicated USB port. The set up information can be stored for instant recall within the dedicated app unlike many third party interfaces whose settings cannot be recalled.  

The Dante card allows 64 channels tobesentto/ received from a Dante network. As well as providing audio exchange with other Dante-enabled equipment, the card also allows 64 channels of audio to be connected directly to a PC or Mac computer for recording or processing, by using a standard Ethernet connection*.  Routing and setup of the network is done using an external computer running Dante Controller software (available FOC from the Audinate website). A BNC sync output connector on the card allows the console’s wordclock input to be driven by the network clock, if required by the clocking setup.

Add up to 128 channels of high-density, low-latency digital audio using Dante (128 channels at 44.1 kHz or 32 channels at 192 kHz) Add up to 128 channels of high-density, low-latency digital audio using Dante (128 channels at 44.1 kHz or 32 channels at 192 kHz)

SQ Dante provides any SQ mixer with a full 64x64 channel, 96kHz or 48kHz interface to a Dante network. An SQ fitted with the Dante option card can seamlessly connect to amplifiers, preamps and other devices on the Dante network, making full use of SQ's high resolution 96kHz audio.The SQ Dante card can be switched between 96kHz or 48kHz to accommodate Dante networks running at either sample rate. In addition to facilitating system integration, the card also enables digital splits and affordable multitrack recording direct to a computer.

The HY144-D-SRC audio interface card supports the Dante audio network protocol, handling up to 144 input and 144 output channels of 96 kHz/32-bit digital audio. The HY144-D-SRC audio interface card supports the Dante audio network protocol, handling up to 144 input and 144 output channels of 96 kHz/32-bit digital audio. Onboard sample rate conversion allows interconnection between devices operating at different sampling rates. Five operational modes can be selected via firmware.

• Transmits and receives up to 144 input and 144 output channels of uncompressed 96 kHz/32-bit digital audio.
• Primary and secondary connectors support redundant connections. Daisy chain connections also supported.
• Five firmware-selectable operating modes: 144io (SRC off, 144 in/144 out), 144io SyncSRC (SRC on, synchronous, 144 in/144 out), 72io AsyncSRC (SRC on, asynchronous, 72 in/72 out), 144in AsyncSRC (SRC on, asynchronous, 144 in/0 out), 144o AsyncSRC (SRC on, asynchronous, 0 in/144 out).
• Dimensions (W x H x D): 125 x 37 x 207mm (4.9" x 1.5" x 8.2")
• Net Weight: 0.25 kg (0.6 lbs)

The Atlona AT-GAIN-NET is a networked audio interface card for the Gain 120 (AT-GAIN-120) power amplifier.  The Atlona AT-GAIN-NET is a networked audio interface card for the Gain 120 (AT-GAIN-120) power amplifier. It features an AES67 and Dante dual-channel audio bridge, adding the capability to accept two channels over a network from a Dante or AES67-equipped DSP, as well as Atlona OmniStream AV encoders. The GAIN-NET can easily be installed into a Gain 120 amplifier in the field.

The DM8-Dante is a Dante Expansion Module with 16 x 32 Channels, Additional ULTRANET Audio Networking and Ethernet Connectivity

• Dante* expansion module for KLARK TEKNIK DM8000 etc. featuring Dante and ULTRANET audio networking
• Expands the processing benefits of DM8000 to third-party systems
• Dante enabled audio networking enables up to 16 input and 16 output channels
• ULTRANET digital audio networking for additional and simultaneous 16 output channels
• Full software configuration and control via integrated Ethernet port
• Dual RJ-45 connections for Dante primary and secondary networking interface
• Transformer-isolated design to eliminate ground loop interference
• 10-Year Warranty Program*
• Designed and engineered in the U.K.

Musicrown's DMS DSP is a Dante interface card.  Musicrown's DMS DSP is a Dante interface card. 

• 32 bit SHARC DSP processing, 48kHz sampling rate, 24 bit AD/DA convert.
• 8X8 core matrix, support 4 input channels, 4 output channels, far-end support 4 channels digital input and 4 channels digital output.
• Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup. Digital audio channel can support 4IN/4OUT, using 24-bit precision and extremely low network latency.
• DSP input channel including noise gate, gain, mute, phase, link adjustment.
• DSP output channel including X-over, 7 band PEQ, Gain, mute, compressor/limiter, phase, delay and link adjustment.
• All PEQ Gain, bandwidth, frequency continues adjustment. Type can be select by PEAK, H-SHELF, L-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.
• All high cut, low-cut filter type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.
• Noise gate's threshold, time, ratio can be adjustment for inputs, compressor, limiter, ratio, time can be adjustment for outputs.
• Maximal delay time 680mS for all input/output channels.
• Inside single generator(pink, white noise and 20~20K sine wave, amplitude adjustable).
• Hardware with 4 channel I/O monitor, supporting temperature, level, fault data sampling.
• 30 user presets, device and each preset can be save and recall alone. Password protection function for high level applications.
• PC software support USB, network TCP IP, Dante port on-line, real-time display of automatically searched IP address, One-button linkage easy for user’s operation more convenient and swift.
• Module power supply mode is DC9V-12V 1A.
• Module size is 100mmx66mmx40mm.

DMS Series:

• DMS 2.0 - 2 analog input, 2 Dante output
• DMS 0.2 - 2 analog output, 2 Dante input
• DMS 2.2 - 2 analog input/output, 2 Dante input/output
• DMS 4.0 - 4 analog input, 4 Dante output
• DMS 0.4 - 4 analog output, 4 Dante input
• DMS 4.4 - 4 analog input/output, 4 Dante input/output

Musicrown's DMH DSP is a Dante interface card.  Musicrown's DMH DSP is a Dante interface card. 

• 32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.
• 8X8 core matrix, which includes 4 local input channels, 4 local output channels, 4 Dante input channels and 4 output channels.
• Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup. Digital audio channel can support 4IN/4OUT, using 24-bit precision and extremely low network latency.
• Input including low-cut, 5 band PEQ, noise gate, gain, mute, phase, link adjustment and volume adjustment.
• Output including X-over, 7 band PEQ, Gain, mute, compressor/limiter, phase, delay and link adjustment and volume adjustment.
• All PEQ Gain, bandwidth, frequency continues adjustment. Type can be select by PEAK, H-SHELF, L-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.
• All high cut, low-cut filter type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.
• Noise gate's threshold, time, ratio can be adjustment for inputs, compressor, limiter, ratio, time can be adjustment for outputs.
• Maximal delay time 680mS for all input/output channels.
• Inside single generator(pink, white noise and 20~20K sine wave, amplitude adjustable ).
• Hardware with 7 channel I/O monitor, 4 channels support AD sampling potentiometer, 3 channels I/O support temperature, level, fault sampling function.
• 21 user presets, device and each preset can be save and recall alone. Password protection function for high level applications.
• PC software support Dante port link, and display automatically searched IP address at rear time. One-button linkage easy for use’s operation more convenient and swift.
• Module power supply is DC5V 2A.
• Module size is 135mmx52mm.

DMH Series:

• DMH 2.0 - 2 analog input, 2 Dante output
• DMH 0.2 - 2 analog output, 2 Dante input
• DMH 2.2 - 2 analog input/output, 2 Dante input/output
• DMH 4.0 - 4 analog input, 4 Dante output
• DMH 0.4 - 4 analog output, 4 Dante input
• DMH 4.4 - 4 analog input/output, 4 Dante input/output

Musicrown's Dante DLS is a Dante interface card. Musicrown's Dante DLS is a Dante interface card. 

• High quality A/D(24-Bit)、D/A（24-Bit）convert, 48KHz sampling rate. Has extremely low network latency.
• Network audio and local audio channel quantity can support maximum at 4IN/4OUT, can satisfy all kinds of application requirement.
• Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup.
• Dante can be used in the standard existing network interchanger, has highly interoperability: perfect cooperation with other start using Dante device.
• +5VDC power supply.

DLS Series:

• DLS 2.0 - 2 analog input, 2 Dante output
• DLS 0.2 - 2 analog output, 2 Dante input
• DLS 2.2 - 2 analog input/output, 2 Dante input/output
• DLS 4.0 - 4 analog input, 4 Dante output
• DLS 0.4 - 4 analog output, 4 Dante input
• DLS 4.4 - 4 analog input/output, 4 Dante input/output

The DNET-DANTE is a Dante® Audio Networking Interfaces for integration into Digitclass equipment and is designed to provide OEM product developers a cost-effective way to incorporate Dante connectivity into a wide variety of products. The DNET-DANTE is a Dante® Audio Networking Interfaces for integration into Digitclass equipment and is designed to provide OEM product developers a cost-effective way to incorporate Dante connectivity into a wide variety of products. Compatible with Dante-enabled devices or PCs with Dante Virtual Sound cards and adds fully redundant primary and secondary Gigabit Ethernet port.

The IF-DA2 is a Dante interface card for Solid State Recorders SS-R250N/SS-CDR250N. Connection with 2 inputs and 2 outputs by mounting the IF-DA2 to the SS-R250N/SS-CDR250N for a Dante system. The IF-DA2 is a Dante interface card for Solid State Recorders SS-R250N/SS-CDR250N. Connection with 2 inputs and 2 outputs by mounting the IF-DA2 to the SS-R250N/SS-CDR250N for a Dante system.

Audinate dante legacy module with up to 32 bidirectional channels. Primary and secondary Ethernet interfaces for dual-redundant Dante networking. Optional Dante Controller software for remote configuration (PC or Mac computer).

• Audinate Dante Legacy Module in Cirrus Logic CobraNet CM-1 format
• Up to 32 bidirectional channels at 48 kHz and 16 bidirectional channels at 96 kHz
• Enables multichannel recording and playback through Dante Virtual Soundcard (PC or Mac computer)
• Primary and secondary Ethernet interfaces for dual-redundant Dante networking
• Operates from internal Dante network Precision Time Protocol (PTP) clock
• Optional Dante Controller software for remote configuration (PC or Mac computer)
• LED indicators monitor network activity and speed
• 3-Year Warranty Program
• Designed and engineered in England

Add up to 64 channels of low-latency digital audio using Dante (64 channels at 44.1 kHz or 16 channels at 192 kHz). Add up to 64 channels of low-latency digital audio using Dante (64 channels at 44.1 kHz or 16 channels at 192 kHz).