Cart
← Back to Product Catalog

Cloud – CV Series Dante Cards

Dante Interface Cards

More details

Similar Products

musicrown-dl-series-io
  • Musicrown

Musicrown – DL Series

Musicrown's DL Dante Connect Box series is an I/O interface. Musicrown's DL Dante Connect Box series is an I/O interface.
  • High quality A/D(24-Bit), D/A(32-Bit) convert, 48KHz sampling rate.
  • DL2.2 is 2 channel balanced MIC/LINE XLR input, 2 channel balance XLR output.
  • DL2.0 is 2 channel balanced MIC/LINE XLR input.
  • DL0.2 is 2 channel balance XLR output.
  • Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup. Digital audio channel can support 2IN/2OUT, using 24-bit precision and extremely low network latency.
  • Each input channel with independent signal light and gain control, also with +48V phantom power controlled by switch. Input channel 1 has high resistance switch select, support guitar, bass, keyboard musical instruments equipment input; input channel 2 extra with two group stereo input port (pair RCA input and one 3.5 socket), supporting media player, notebook computer and other equipments signal input.
  • Each output channel with independent signal light.
  • Dante can be used in the standard existing network interchanger, has highly interoperability: perfect cooperation with other start using Dante device.
  • Outer connect +12VDC power supply, Power switch independently controlled and power indicator light.
DL Series:
  • DL2.2 is 2 channel balanced MIC/LINE XLR input, 2 channel balance XLR output
  • ●  DL2.0 is 2 channel balanced MIC/LINE XLR input
  • ●  DL0.2 is 2 channel balance XLR output
    Dante Interface Cards
See the product
wohler
  • Wohler

Wohler – OPT-DANTE (12G)

Installing a Wohler unit with the Dante hardware option into an existing and functioning Dante network is virtually plug and play. The rear panel AoIP jack supports 1Gb/s and 100Mb/s Ethernet devices in Dante Audio over IP network configurations. Channel source selections are made by choosing Input Type ‘AoIP’ in the Configuration-Configure Presets page regardless of which AoIP option is installed. The iAM-series unit is set up at the Wohler factory to be used as a slave rather than a master within the Dante network. Other devices or software, such as a Dante Controller, are expected to be responsible for most device configurations and all audio routing.

    Dante Interface Cards
  • Dante Ch: 64x0
  • AES67 Enabled
See the product