Cart
← Back to Product Catalog

ELAN – EL-IPD-NAC-EXT

Dante Interface Cards

More details

Similar Products

OPT-AoIP-iVAM_r
  • Wohler

Wohler – OPT-DANTE (iAM)

Enable monitoring from up to a 64ch Dante™ Input in iAM Series products.

Installing a Wohler unit with the Dante hardware option into an existing and functioning Dante network is virtually plug and play. The iAM Series rear panel AoIP jack supports 1Gb/s and 100Mb/s Ethernet devices in Dante Audio over IP network configurations. Channel source selections are made by choosing Input Type ‘AoIP’ in the Configuration-Configure Presets page regardless of which AoIP option is installed. The iAM-series unit is set up at the Wohler factory to be used as a slave rather than a master within the Dante network. Other devices or software, such as a Dante Controller, are expected to be responsible for most device configurations and all audio routing.

    Dante Interface Cards
See the product
Biamp|Biamp
  • Biamp

Biamp – Tesira DAN-1

The Dante-enabled DAN-1 digital server networking card functions as a gateway interface to support 64x64 channels of Dante networked audio.
    Dante Interface Cards
See the product
1073opx-digital-option-card-136-p[ekm]1000x691[ekm]
  • AMS Neve

AMS Neve – 1073OPX Digital Option Card

When Legend meets future. The 1073OPX Optional Digital card provides a USB and Dante AD/DA interface with eight channels of analogue to digital conversion for each 1073OPX preamp output and two channels of Digital to Analogue conversion for the digital monitor return signal path. The USB connection allows the 1073OPX to be connected to a DAW enabled PC/MAC computer to be used as a Primary/Core audio interface. In addition to the USB connection,  Primary and Secondary Dante connections  allow for  the 1073OPX to be connected to any Dante Audio-Over-Ip network as a Dante enabled preamp. The Digital card can be retrofitted easily to any existing 1073OPX unit.  

    Dante Interface Cards
See the product