Dante-enabled Product Catalog

* Dante™ Ultimo insides with hi performance Class D Audio DSP Amplifier

* Built-in KAP™ (Keiga Audio Performance) software to configure audio DSP

* KAP™ provides “Find-me” ping signal for easy location identification

* KAP™ tools can save and load the speaker profiles saving installation time & efforts

* Audio DSP provides up to 5 sets of PEQ setting for each channel

* One Rj45 connection for the Dante™ audio signals and PoE power network

* ED-004 supports both IEEE 802.11af/at (PoE/PoE+) and Local DC-In power input

* Supports Dante™ Domain Manger and AES67 compliant

* Auto detect PoE+ (30W) or PoE (15W) power levels

* Fully protection with OTP, OTP, OVP, Auto Recovery and Surge Protection

* 5 LED status display for PoE status and channel signal and peak

The SF-NP50A is an audio power amplifier that converts one Dante network audio channel and one analog input to a 70 V or 100 V constant voltage amplified output. The output provides 50 watts for a network digital audio level of 0 dBFS. Special software is not required to configure the module.

An analog audio source may be connected to either the mono balanced terminal block input or to the unbalanced Mini-Jack which sums the left and right channels to mono. Input gain is set by the installer using a rear-panel single-turn potentiometer with an associated dual-LED VU meter calibrated to 20 dB below maximum power output.

Either the analog input or the network audio input may be used as a paging source. A rear-panel switch is used to set which input has priority. That input utilizes an automatic detection circuit with an adjustable threshold indicated by an LED to attenuate by 25 dB or mute OFF the other input as set by a rear-panel switch. The attenuated input fades up to normal volume when the paging message is finished.

The Dante network audio source drives a balanced line-level output on a detachable terminal block to feed the inputs of other audio equipment or power amplifiers. The output level is +4 dBu balanced for a network level of -20 dBFS.

The SF-NP50A is equipped with an internal VCA for setting the amplifier output level. A detachable terminal block provides for the connection of an external 10 kΩ potentiometer or a 0 to 10 Vdc control voltage. RDL remote controls are available to provide single-turn, multi-turn (rotary encoder) or pushbutton (ramp or fixed level selection) user level control. VCA control insures long term noise-free level adjustment.

The module is equipped with both thermal and output short-circuit protection. The high-efficiency Class D output stage produces minimal heat for all levels of expected voice or music modulation. Upon power-up and during overloads or overheating, an LED MUTE indicator glows yellow and the output is muted. Valid synchronization to the Dante network is indicated by a green LED visible from the front of the unit.

The SF-NP50A is equipped to operate from an included external 24 Vdc power supply. The SF-NP50A monitors the amplifier power and limits the current to protect the power supply from shutting down even during extreme feedback or square wave modulation conditions. A red rear-panel OVERLOAD PROTECT LED flashes when the SF-NP50A reduces power consumption to prevent shutdown of the power supply.

The SF-NP50A is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.

The intention behind the MAxx series is to offer the highest channel count per rack space in one single unit. This high-density package offers you a completely new design perspective, where it's now possible to deliver a high amount of audio channels in a place where you would never have thought about with conventional solutions.

Offering a comprehensive set of inputs like Dante / MADI / AES3. Paired with a rich set of DSP capabilities including IIR- / FIR-filters with up to 2048 taps which allows to fine-tune every single speaker in room acoustic situations to its best.

The ability to bridge channels denotes the new second-generation MAxx series as the perfect all-round talent for flexible installations.

MA32/HP² delivers 32x 280W @4 Ω combined with a redundancy power supply for double the continuous power or safety-critical projects.

* Dante™ Ultimo insides with hi performance Class D Audio DSP Amplifier

* Built-in KAP™ (Keiga Audio Performance) software to configure audio DSP

* KAP™ provides “Find-me” ping signal for easy location identification

* KAP™ tools can save and load the speaker profiles saving installation time & efforts

* Audio DSP provides up to 5 sets of PEQ setting for each channel

* One RJ45 connection for the Dante™ audio signals and PoE power network

* ED-71 supports both IEEE 802.3af/at/bt Type 4 (PoE/PoE+/PoE++) and local DC-In

* Supports Dante™ Domain Manger and AES67 compliant

* Auto detect PoE++ (90W), PoE+ (30W) or PoE (15W) power levels

* Fully protection with OTP, OTP, OVP, Auto Recovery and Surge Protection

* 5 LED status display for PoE status and channel signal and peak.

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA24/HP² delivers 24×280W @4 Ω in only 3U of rack space with a redundant power supply.

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA32/HP² delivers 32×280W @4 Ω in only 3U of rack space with a redundant power supply.

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA16/D² delivers 16x 280W @4 Ω in only 2U of rack space.

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA24/D² delivers 24×280W @4 Ω in only 2U of rack space.

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA32/D² delivers 32x 280W @4 Ω in only 2U of rack space.

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA16/LP² delivers 16×50W @4 Ω in only 1U of rack space.

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA24/LP² delivers 24×50W @4 Ω in only 1U of rack space.

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA32/LP² delivers 32×50W @4 Ω in only 1U of rack space.

MA-120TD, MA-240TD, MA-350TD, MA-500TD

> Priority:EMC >MIC1>MIC2, MIC3, AUX1, AUX2.
> 4 microphone and 2 auxiliary inputs.
> 1 Dante Audio and 1 DSP control inputs.
> 100V and 4-16 Ohms rear panel switchable speaker outputs.
> Automatic mute function for paging and announcements.
> Individual input gain controls with master volume control.
> Mp3/TUNER/Bluetooth module with screen display.
> 24VDC backup power supply.
> Standard 1U 19 inch size with detachable mounting ears.
> Speaker output short circuit protection.

MA-1000TD is a multi-function network DSP digital High-Z and low-Z power amplifier 2*500W@4Ω, 2*300W@8Ω, bridged 1000W@8Ω, low-Z 100V-1000W@10Ω. It can remotely monitor the status of power amplifier, set compression Controller, limiter, noise gate, parametric equalization, matrix routing, delay and other DSP functions in real time. Simple software interface provides customers with simple setup and operation experience, and a variety of connection methods ensure its good configurability and expandability, suitable for various applications, such as performance center, theatre, gallery, hotel, conference center, shopping center, retail store, restaurant, etc.

Good sound belongs everywhere - in the hotel lobby, in conference rooms, in schools and houses of worship. Demands are constantly increasing, not only in terms of quality, but also in terms of flexibility. Permanently installed and still flexible? This apparent contradiction can be resolved by the IPA Series DSP-based installation amplifiers.

The IPA 412 T is a professional, four-channel installation power amplifier with 4 x 120 watts. While the 70V/100V outputs are equipped with high quality toroidal core transformers, the low impedance 4-Ohm outputs are completely transformerless and guarantee the highest possible audio quality. The versatile DSP functions include, amongst others, a parametric EQ with matching speaker library, dynamic tools, a matrix mixer, priority source selection and delay.

Despite this range of functions, the IPA Series power amps are easy to operate. Important functions such as signal, limit, protection and bridge mode are easily visible via the LEDs on the front panel.

HPF/LPF presets can be enabled directly on the device via DIP switches The IPA 412 T is already equipped for remote control using future remote panels and paging microphones from LD Systems. The back-panel slot provides expansion card connectivity for additional future-proofing. The Ethernet card offers comprehensive configuration and management via software. The Ethernet+Dante card also offers Dante audio networking capabilities and connection to a wide range of Dante-enabled devices, in order to integrate the IPA 412 T into the Dante network and resolve more complex tasks.

Times are changing; rooms are redivided or rededicated, numbers of attendees increase or decrease based on unforeseen events, but with the IPA Series DSP-supported power amps, your installation is prepared for any situation. Scalability and future-proofing are the biggest advantages of the IPA Series. Its energy efficiency is also ideal thanks to the class-D technology and switchable auto standby.

The IPA 424 T variant with 4 x 240 watts is available for larger installations.

Frequency Response=20Hz-18kHz

■IN/OUT Port=3.25mm TS balanced & Dante Network,

Preset mode(4 MODE), Reverb on/off, Speaker Terminal

■Dante=Dante / 100MBit ■Power Consumption=35W

■Rated Output=100W(4Ω) x 2CH ■Dante / 100MBit, Latency: less than 3ms

■Rated Power=AC110-240V, 50/60Hz

■Dimensions(W x H x D)=200 x 55 x 200mm ■Weight=1kg

The AMP203 is a revolutionary mini stereo amplifier, featuring network input through Dante™ or AES67 providing a complete media networking solution to distribute uncompressed audio via standard Ethernet networks with near-zero latency, while allowing all other data to be connected on the same network.

Various DSP functionalities are implemented in the AMP203. This allows all configurations to be made in AUDAC Touch™ 2 or via RS485 and Ethernet, making it a fully-fletched 2 x 30W amplifier. The output connector has been implemented using a 4-pin terminal block connector, featuring an output power of 30W per channel and 60W when bridged.

Using PoE (Power over Ethernet) this extremely power-efficient amplifier receives both power and signal through a single networking cable, this way flexibility is maximized while needed cabling is kept at a minimum.

The compact convection cooled enclosure eliminates any humm or buzz otherwise caused by a fan. Various optional mounting brackets are available like the MBS1xx series, which allow it to be mounted under a desk, in a closet, on the wall, on top of a dropped ceiling or to a 19" equipment rack. This proves that the AMP203 is the perfect solution for compact to medium-sized applications in corporate, hospitality or retail environments.

Decentralize your system

Thanks to the multifunctional use of the AMP203 in combination with the AUDAC Touch™ 2 app it is possible to create a decentralized multi-zone system. By simply connecting the AMP203 to the local network and connecting the loudspeakers, a new zone can be introduced to your system.

● Comply with Dante Network System

● 2 channel amplifiers within one 1U & 19" case

● Two audio inputs, can be added to the existing Dante system

● Two priority inputs and two 100V inputs as audio sources

● 70V/100V speaker output for long distance transfer

● Industrial design for audio project, long term & stable use

● High efficiency (85%) and with standby function

● 32 bit DSP, 48kHz sampling rate, 24bit AD/DA convert.

● Each analog input channel with +48V phantom power, MIC/LINE input gain switchable, MIC input sensitivity adjustable.

● Input including, low-cut, independent feedback inhibition, 5 band PEQ, noise gate, gain, mute, phase, link adjustment and volume adjustment.

● Output including X-over, 7 band PEQ, Gain, mute, compressor/limiter, phase, delay and link. Adjustment and volume adjust.

● All PEQ Gain, bandwidth, frequency continues adjustment. type can be select by PEAK, H-SHELF, L-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.

● All inputs/outputs can do Matrix, and all the input and output channel name can be changed.

● All the input and output with independent phase curve adjust function, PEQ style choose ALLPASS1 is 180°curve adjust, ALLPASS2 is 360° curve adjust.

● All high cut, low-cut filter type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.

● Noise gate's threshold, time, ratio can be adjustment for inputs, compessor, limiter, ratio, time can be adjustment for outputs.

● Maximal delay time 680mS for all input/output channels.

● Pre settings can copy for every single channel, every channel can do link adjust.

● Every input and output channel PEQ curve adjusting picture can be found when you are in any input and output.

● Inside single generator(pink, white noise and 20~20K sine wave, amplitude adjustable ).

● Front panel has level indicator for input/output ,USB port, power supply, net port indicator light. Plug-in USB port and net port. PC one-button connection easy for user’s operations.

● 21 user presets, device and each preset can be save and recall. Password protection function for high level applications.

● Unique assembly aluminum side plate card slot design, can assemble two identical machines into one standard 1U machine. Also can assemble its side ear to the standard cabinet.

Good sound belongs everywhere - in the hotel lobby, in conference rooms, in schools and houses of worship. Demands are constantly increasing, not only in terms of quality, but also in terms of flexibility. Permanently installed and still flexible? This apparent contradiction can be resolved by the IPA Series DSP-based installation amplifiers.

The IPA 424 T is a professional, four-channel installation power amplifier with 4 x 240 watts. While the 70V/100V outputs are equipped with high quality toroidal core transformers, the low impedance 4-Ohm outputs are completely transformerless and guarantee the highest possible audio quality. The DSP functions include, amongst others, a parametric EQ with matching speaker library, dynamic tools, a matrix mixer, priority source selection and delay.

Despite this range of functions, the IPA Series power amps are easy to operate. Important functions such as signal, limit, protection and bridge mode are easily visible via the LEDs on the front panel.

HPF/LPF presets can be enabled directly on the device via DIP switches. The IPA 424 T is already prepared for remote control using future remote panels and paging microphones from LD Systems. The back-panel slot provides expansion card connectivity for additional future-proofing. The Ethernet card offers comprehensive configurability and management via software. The Ethernet+Dante card also offers Dante audio networking capabilities and connection to a wide range of Dante-enabled devices, in order to integrate the IPA 424 T into the Dante network and resolve more complex tasks.

Times are changing; rooms are redivided or rededicated, numbers of attendees increase or decrease based on unforeseen events, but with the IPA Series DSP-supported power amps, your installation is prepared for any situation. Scalability and future-proofing are the biggest advantages of the IPA Series. Its energy efficiency is also ideal thanks to the class-D technology and switchable auto standby.

The IPA 412 T variant with 4 x 120 watts is available for smaller installations.

Virgil was the Roman poet who guided Dante through Hell and Purgatory, the Glensound Virgil is a clever little headphone amplifier for providing crystal clear audio into studio & broadcast headphones.

Packaged in a small & robust format and designed to be permanently mounted in studios wherever a headphone circuit is required, the Virgil provides a simple interface between Dante network audio systems and users headphones.

The Virgil encompasses our unique headphone amplifier circuit which automatically provides the correct output level to match the impedance of the attached headphones (to produce the same volume high impedance headphones require a much greater output level than low impedance).

Virgil receives 2 x audio circuits from a Dante network and routes one to the left and the other to the right channel of the headphone amplifier. A front panel volume control allows the user to adjust the output volume.

Three mounting holes are supplied to enable the Virgil to be mounted underneath a studio desk in a suitable location for the users headphones. Needing just 1 single network cable to carry both power & audio to the Virgil makes installation very simple.

As well as being suitable for low & high impedance headphones our unique headphone amplifier circuit can be connected to both stereo headphones & mono earpieces, making the Virgil suitable for driving television presenters ear pieces.

The Attero Tech by QSC DTH1620 is multi-channel, low-power (16-channel x 20 watts) Dante/AES67 network amplifier, designed for themed entertainment usage and other specialized audio applications, and optimized for integration into the Q-SYS Ecosystem.

The Smart pi NAM (Network Amplifier Modules) are commercial and industrial amplifiers that can be installed in the field and close to the speaker location, this allows ease of changing audio zoning, sources, priorities and volume for every single speaker within the system. Each NAM has 4 x 12-Watt RMS class D amplifiers, an Ethernet switch with 2 fibre and 2 ethernet ports, and built in DSP (EQ, FIR, delay and gain). The NAM-HP has 4 x 75-Watt RMS class D amplifiers further offering the ability to incorporate TCoil and induction loops into PA systems for the hearing impaired.

The Network Amplifier Modules (NAM) is a high quality, highly versatile amplifier. With 4 versions available, 2 x Indoor Units and 2 x Outdoor Units, there is a NAM for almost any requirement.
Outdoor (IP66) units can be installed in the field near the location of the speakers for Railway Stations and other outdoor venues, whilst indoor NAMs can be installed neatly in the ceiling or on a wall inside.

There are two power options available with each standard power NAM having 4 x 12 Watt RMS class D amplifier channels and the High Power (NAM-HP), 4 x 50 Watt RMS class D amplifier channels, both units have an Ethernet switch and built in DSP (EQ, FIR, delay and gain). Each amplifier has an individual Dante input allowing for simple zoning and future changes.

Energy Star Certified, Dante inputs, DDM ready and 2x120 Watt amplifier with Direct Drive Technology delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations. Provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. FAD1202 is easy to install and operate – even for non-technical personnel. Simply put, the FAD1202 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system. It also consumes less mains power than competing models, this amazing technology makes it possible to design and build powerful amplifier systems that not only save money on the electrical bill, but also reduce the requirements and cost at the installation for the mains supply. In fact, it is likely that installation can be done utilizing the in-place mains infrastructure. This adds up to significant installation and operational savings and protects the environment.

2 x 240 Watt Commercial Amplifier with Direct Drive Technology, Dante Networking, DDM Ready and Energy Star Certification. Delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations. Provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. FAD2402 is easy to install and operate – even for non-technical personnel. Simply put, the FAD2402 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system.
It also consumes less mains power than competing models, this amazing technology makes it possible to design and build powerful amplifier systems that not only save money on the electrical bill, but also reduce the requirements and cost at the installation for the mains supply. In fact, it is likely that installation can be done utilizing the in-place mains infrastructure. This adds up to significant installation and operational savings and protects the environment.

2 x 60 Watt Commercial Amplifier with Direct Drive Technology, Dante Networking, DDM Ready and Energy Star Certification. Delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations. Provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. FAD602 is easy to install and operate – even for non-technical personnel. Simply put, the FAD602 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system.
It also consumes less mains power than competing models, this amazing technology makes it possible to design and build powerful amplifier systems that not only save money on the electrical bill, but also reduce the requirements and cost at the installation for the mains supply. In fact, it is likely that installation can be done utilizing the in-place mains infrastructure. This adds up to significant installation and operational savings and protects the environment.