Cart
← Back to Product Catalog

AMC – iAC2X240

Amplifiers

More details

Similar Products

na2012
  • Kevic

Kevic – NA2012

Frequency Response=20Hz-18kHz

■IN/OUT Port=3.25mm TS balanced & Dante Network,

Preset mode(4 MODE), Reverb on/off, Speaker Terminal

■Dante=Dante / 100MBit ■Power Consumption=35W

■Rated Output=100W(4Ω) x 2CH ■Dante / 100MBit, Latency: less than 3ms

■Rated Power=AC110-240V, 50/60Hz

■Dimensions(W x H x D)=200 x 55 x 200mm ■Weight=1kg

    Amplifiers
See the product
listen-technologies-D14-2-DANTE_1200px
  • Listen Technologies

Listen Technologies – D14-2 DANTE D Series MultiLoop™ Driver

The D14-2-DANTE (D Series) represents the global benchmark for digital audio induction loop systems. The compact, elegant and sturdy units not only feature digital signal processing and networking functionality, but are also the most versatile and powerful solution available. The D14-2-DANTE (D Series) represents the global benchmark for digital audio induction loop systems. The compact, elegant and sturdy units not only feature digital signal processing and networking functionality, but are also the most versatile and powerful solution available. The D14-2-DANTE hearing loop amplifier is a 14 Amp dual output class 'D' driver; meaning a 60%+ increase in energy efficiency over existing solutions. Both drivers feature capacitive touch front panels with intuitive menus, built in test signals, and are fully networkable with a Wi-Fi accessible standard browser based control panel for remote set-up, monitoring and email alerts. Dante versions also feature a Dante specific RJ45 input for plug and play Dante network audio. The D14-2-DANTE features 14 Amps per loop output plus ample voltage headroom, making it the most flexible solution on the market, suitable for a large range of applications. The added power of the D14-2-DANTE provides a solution for installations in environments containing very high levels of metal, previously not possible without the use of combiners. In another first for high-power Class D Induction Loop Drivers, installation can be performed with total confidence, as unique multi-stage filtering ensures compatibility with both other system equipment and global EMC regulations. The D14-2-DANTE also boasts Dual Slope Metal Loss Control that caters to a wide range of metal loss frequency characteristics.
    Amplifiers
See the product
nXp-3.04-front
  • Ashly Audio

Ashly – nXp3.04d

The nXp3.04d is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
See the product