Cart
← Back to Product Catalog

Keiga – ED004

Amplifiers

More details

Similar Products

kling-freitag-d-20-4_1200px
  • Kling & Freitag

Kling & Freitag – D 20:4

The D 20:4 is a 4 channel power amplifier platform for all the K&F speaker systems. The D 20:4 is a 4 channel power amplifier platform for all the K&F speaker systems. Features
  • 'Rational Power Management' (RPM) for flexible power distribution
  • Lake® platform loudspeaker management and system control
  • Scaleable and combinable with additional K&F D Series and K&F PLM+ Series SystemAmps
  • Worldwide useable due to the 'Power Factor Correction' power supply
  • AES3, analogue and redundant Dante™ Inputs/Outputs
  • Rugged and compact 1U rackmount chassis for durability in installation applications
    Amplifiers
See the product
labgruppen-D-20-4L
  • Lab.gruppen AB

Lab.gruppen – D 20:4L

The Lab.gruppen D 20:4L combines 2000W with 4 flexible output power channel with the latest LAKE digital signal processing, DANTE digital audio networking and advanced system integrity monitoring for installation applications. The Lab.gruppen D 20:4L combines 2000W with 4 flexible output power channel with the latest LAKE digital signal processing, DANTE digital audio networking and advanced system integrity monitoring for installation applications.
    Amplifiers
  • Dante Ch: 8x8
  • 24-bit
See the product
nXp-3.02-front|nXp-3.02-front
  • Ashly Audio

Ashly – nXp3.02d

The nXp3.02d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • 24-bit
  • 48kHz-96kHz
See the product