Dante-enabled Product Catalog

* Dante™ Ultimo insides with hi performance Class D Audio DSP Amplifier

* Built-in KAP™ (Keiga Audio Performance) software to configure audio DSP

* KAP™ provides “Find-me” ping signal for easy location identification

* KAP™ tools can save and load the speaker profiles saving installation time & efforts

* Audio DSP provides up to 5 sets of PEQ setting for each channel

* One RJ45 connection for the Dante™ audio signals and PoE power network

* ED-71 supports both IEEE 802.3af/at/bt Type 4 (PoE/PoE+/PoE++) and local DC-In

* Supports Dante™ Domain Manger and AES67 compliant

* Auto detect PoE++ (90W), PoE+ (30W) or PoE (15W) power levels

* Fully protection with OTP, OTP, OVP, Auto Recovery and Surge Protection

* 5 LED status display for PoE status and channel signal and peak.

* ED-22, Maximum supports 11Wx2@8Ω or PBTL mode for 22W@4Ω

* Built in Audio DSP for Volume, PEQ, Filter and Input Gain controls

* Dante™ Receiver as the audio input

* 2 sets two pins Euro-block Speaker output

* Signal Noise Ratio: ~ 93 dB

* Crosstalk in stereo mode: ~ - 64 dB

* THD + N (full power): < 0.5%

* Measure size: 114 (W) x 93(D) x 38(H) mm and Weight: 250g.

* Dante™ Ultimo insides with hi performance Class D Audio DSP Amplifier

* Built-in KAP™ (Keiga Audio Performance) software to configure audio DSP

* KAP™ provides “Find-me” ping signal for easy location identification

* KAP™ tools can save and load the speaker profiles saving installation time & efforts

* Audio DSP provides up to 5 sets of PEQ setting for each channel

* One Rj45 connection for the Dante™ audio signals and PoE power network

* 2nd Rj45 connection for daisy chain 90W power to other PoE devices

* Supports both IEEE 802.3af/at/bt (PoE/PoE+/PoE++) and local DC-In

* Dante™ Domain Manger and AES67 compliant

* Auto detect PoE++ (90W), PoE+ (30W) or PoE (15W) power levels

* Built in 6.3mm microphone input as Dante audio in

* Fully protection with OTP, OTP, OVP, Auto Recovery and Surge Protection

* 5 LED status display for PoE status and channel signal and peak.

* Dante™ Ultimo insides with hi performance Class D Audio DSP Amplifier

* Built-in KAP™ (Keiga Audio Performance) software to configure audio DSP

* KAP™ provides “Find-me” ping signal for easy location identification

* KAP™ tools can save and load the speaker profiles saving installation time & efforts

* Audio DSP provides up to 5 sets of PEQ setting for each channel

* One Rj45 connection for the Dante™ audio signals and PoE power network

* Supports both IEEE 802.3af/at/bt (PoE/PoE+/PoE++) and local DC-In

* Dante™ Domain Manger and AES67 compliant

* Auto detect PoE++ (90W), PoE+ (30W) or PoE (15W) power levels

* Fully protection with OTP, OTP, OVP, Auto Recovery and Surge Protection

* LED status display for PoE status and channel signal and peak.

* Provides GPIO for external control usage

* Dante™ Ultimo insides with hi performance Class D Audio DSP Amplifier

* Built-in KAP™ (Keiga Audio Performance) software to configure audio DSP

* KAP™ provides “Find-me” ping signal for easy location identification

* KAP™ tools can save and load the speaker profiles saving installation time & efforts

* Audio DSP provides up to 5 sets of PEQ setting for each channel

* One Rj45 connection for the Dante™ audio signals and PoE power network

* ED-005 supports both IEEE 802.3af/at/bt (PoE/PoE+/PoE++) and local DC-In

* Supports Dante™ Domain Manger and AES67 compliant

* Auto detect PoE++ (90W), PoE+ (30W) or PoE (15W) power levels

* Fully protection with OTP, OTP, OVP, Auto Recovery and Surge Protection

* 5 LED status display for PoE status and channel signal and peak.

* Dante™ Ultimo insides with hi performance Class D Audio DSP Amplifier

* Built-in KAP™ (Keiga Audio Performance) software to configure audio DSP

* KAP™ provides “Find-me” ping signal for easy location identification

* KAP™ tools can save and load the speaker profiles saving installation time & efforts

* Audio DSP provides up to 5 sets of PEQ setting for each channel

* One Rj45 connection for the Dante™ audio signals and PoE power network

* ED-004 supports both IEEE 802.11af/at (PoE/PoE+) and Local DC-In power input

* Supports Dante™ Domain Manger and AES67 compliant

* Auto detect PoE+ (30W) or PoE (15W) power levels

* Fully protection with OTP, OTP, OVP, Auto Recovery and Surge Protection

* 5 LED status display for PoE status and channel signal and peak

RM12D is a 1200w 12-channel amplifier with built-in Dante networking.

RH1002D is a 2 channel, 1000w high voltage amplifier with built-in Dante networking.