Cart
← Back to Product Catalog

Keiga – RH1002D

Amplifiers

More details

Similar Products

Director M4800D with Dante
  • AudioControl

Director M4800D

The AudioControl Director Model M4800D combines 100 watts/8-Ohms, 200 watts/4-Ohms of output into an 8x4 stereo matrix that extracts clarity and detail from any loudspeaker, plus onboard DSP (digital signal processing) including graphic and parametric equalization by zone. The M4800D allows for the ability to bridge channels, giving integrators configuration flexibility for any imaginable system design.
    Amplifiers
  • Dante Ch: 16x16
  • 16-bit, 24-bit
See the product
Bittner_Audio_4Xe_500x108
  • Bittner Audio

Bittner – 4X 1200e

The Bittner 4Xe power amplifier is available in 2 models, the 4X 1200e and 4X 2000e (with 4 x 1200 watt and 4 x 2000 watts @ 4 ohms respectively), and offers front controls, analog or digital inputs, XLR or Phoenix input connectors, Speakon or Phoenix output connectors – the concept of the 4X is as flexible as its applications. Also available are audio networking via Dante™ and control via Ethernet (with SXL II) offering worldwide diagnostics and maintenance via the Internet The 4Xe and the rear control version, the 4Xi, both offer the following specifications:
  • Up to 4x 2000 W in only 2 RU
  • Impedance measurement
  • Selectable Clip Limiter (hard/soft)
  • 4-channel Dante Inputs
  • SXL II Dataport (RS485)
  • High Tech SMT Design
  • Excellent sound and superior impulse response
  • 2 separate stereo amplifiers
  • Ready for 2 Ohm operation
  • Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
  • XLR inputs and Speakon outputs (e version)
  • Phoenix in- and outputs (i version)
  • High-End switched power supply with PFC
  • LED indicators for SIGNAL, CLIP, PROTECT, POWER
  • Temperature controlled, variable speed low noise fans
  • Digital wear-free Volume Controls (can be operated manually)
  • Selectable Stereo/Bridged Mode
  • Softstart
  • Sequential Remote Power On
  • 2 Alive Contacts
  • 3 Years Warranty
    Amplifiers
See the product
avn-ah8-iso-300dpi
  • Sonifex

Sonifex – AVN-AH8

The AVN-AH8 multi-channel headphone amplifier is a 1U rack-mount which distributes 2 sets of stereo audio to up to 8 different sets of headphones, fed from the Dante AoIP network. A typical application might be to provide common headphone feeds for guests in a radio studio, coming directly from the AoIP network.

Each output has front panel unbalanced 1/4” & 3.5mm jack sockets and a rotary level control. The front panel potentiometers adjust the headphone volumes from mute (fully anticlockwise) to 0dB of gain when fully clockwise. This is useful if the Dante stream level is low or high and requires adjusting.

There are 8 parallel 1/4” jacks on the rear panel, for ease of wiring if the unit is installed in an enclosed rack.

Each of the 8 professional headphone outputs can each select between 2 stereo Dante sources which are routed via Dante controller. The level of each stereo Dante stream can be adjusted ±12dB using one of the two front panel rotary controls. The unit supports AES67 operation and is Dante Domain Manager compliant.

The AVN-AH8 front panel contains a power (PoE) LED, a DC LED, a network link status LED, and a clock LED. A recessed reset switch is also provided.

The unit is powered via Power over Ethernet (PoE) or a 12VDC input via a locking 2.5mm DC Input, 2A minimum rating.

    Amplifiers
  • Dante Ch: 4x0
  • 16-bit, 24-bit, 32-bit
See the product