Dante-enabled Product Catalog

Crown ComTech D Series amplifiers are designed for versatility, flexibility, and ease of installation. With both Dante inputs and outputs, built-in DSP, power sharing, Lo-Z/Hi-Z switching, and a simple to use web configuration interface, ComTech D amplifiers are ideal for meeting the changing demands of diverse installed audio applications. The CTD-8125 delivers 125 watts per channel of legendary Crown amplification when all channels are driven equally. Asymmetrical power sharing enables each set of four channels to share 500W in any ratio, offering unparalleled flexibility. Built-in DSP allows outputs to be tuned specifically for every application and provides the ability to create custom speaker tunings. Factory JBL SpeakerTunings for select JBL models, including Control 400 Series ceiling speakers, are included to simplify the optimization of an all-HARMAN solution. The amplifier can be configured through the intuitive web interface with any computer or tablet and without the need to install proprietary software. It uses HARMAN's HControl protocol to communicate natively with BSS OMNI Processors or AMX MUSE Automation Controllers and includes an easy-to-use API for integration with 3rd-party control systems. This compact amplifier requires only 1 RU rack space.

Crown ComTech D Series amplifiers are designed for versatility, flexibility, and ease of installation. With both Dante inputs and outputs, built-in DSP, power sharing, Lo-Z/Hi-Z switching, and a simple to use web configuration interface, ComTech D amplifiers are ideal for meeting the changing demands of diverse installed audio applications. The CTD-4125 delivers 125 watts per channel of legendary Crown amplification when all channels are driven equally. Asymmetrical power sharing enables the four channels to share the full 500W in any ratio, offering unparalleled flexibility. Built-in DSP allows outputs to be tuned specifically for every application and provides the ability to create custom speaker tunings. Factory JBL SpeakerTunings for select JBL models, including Control 400 Series ceiling speakers, are included to simplify the optimization of an all-HARMAN solution. The amplifier can be configured through the intuitive web interface with any computer or tablet and without the need to install proprietary software. It uses HARMAN's HControl protocol to communicate natively with BSS OMNI Processors or AMX MUSE Automation Controllers and includes an easy-to-use API for integration with 3rd-party control systems. This compact 1RU, ½ rack width device can be installed in a rack, under a table, or on a wall using the included mounting hardware.

Crown ComTech D Series amplifiers are designed for versatility, flexibility, and ease of installation. With both Dante inputs and outputs, built-in DSP, power sharing, Lo-Z/Hi-Z switching, and a simple to use web configuration interface, ComTech D amplifiers are ideal for meeting the changing demands of diverse installed audio applications. The CTD-2125 delivers 125 watts per channel of legendary Crown amplification when all channels are driven equally. Asymmetrical power sharing enables the two channels to share the full 250W in any ratio, offering unparalleled flexibility. Built-in DSP allows outputs to be tuned specifically for every application and provides the ability to create custom speaker tunings. Factory JBL SpeakerTunings for select JBL models, including Control 400 Series ceiling speakers, are included to simplify the optimization of an all-HARMAN solution. The amplifier can be configured through the intuitive web interface with any computer or tablet and without the need to install proprietary software. It uses HARMAN's HControl protocol to communicate natively with BSS OMNI Processors or AMX MUSE Automation Controllers and includes an easy-to-use API for integration with 3rd-party control systems. This compact 1RU, ½ rack width device can be installed in a rack, under a table, or on a wall using the included mounting hardware.

The BSS Soundweb OMNI 512p Open Architecture Digital Signal Processor is the most powerful enterprise-grade processor ever developed by BSS. With processing capability that surpasses previous BSS products, the all-new design ensures the seamless handling of today’s most complex installations to be future-ready to meet the evolving needs of tomorrow. The 512p features 512x512 at up to 96kHz Dante/AES67 networked audio channels; enterprise-grade network security support; an onboard scripting engine developed by AMX; 8 GPIO ports (fully flexible); 160 AEC channels; 64 VoIP lines; high precision word clock and BNC clock (in/out); dual redundant power supplies, Dante and HControl; 128 channel internal media player with 1TB SSD; full-color, interactive front panel LCD; and more. Every GPIO port is format (analog or digital) and directionally (input or output) configurable. Any channel can also be configured to function as a digital binary, to provide 0 or 5 volts, or configured to receive or send any voltage between 0 and 12 volts. The Soundweb OMNI family also includes two I/O Expanders, the 32e and 16e, which provide unparalleled I/O flexibility as needed. The integrated 128-channel internal media player facilitates the playback of pre-recorded audio files directly from an internal 1TB SSD. This is useful for announcements, paging chimes, advertisements, background soundscapes, and more. Supporting up to 160 AEC channels and 64 VoIP lines, the 512p provides seamless integration capability with building phone systems to ensure efficient and reliable communication. The onboard scripting engine allows previous generation BSS Soundweb Contrio EC wall controller devices to control new Soundweb OMNI devices, while also allowing new AVX software to integrate previous generation BSS Soundweb London DSPs and Crown DCi amplifiers into a unified custom UI, directly alongside Soundweb OMNI. With support for centralized or distributed DSP topologies, system integrators can add as many Soundweb OMNI processors to a single project file as needed, while still enjoying the simplicity of a single canvas for device configuration. HARMAN's HControl protocol, a human-readable, standards-based, developer-friendly API is also supported. It offers an intuitive, flexible, and powerful alternative to other protocols to support developers working at any scale. Soundweb OMNI systems are configured, controlled, and monitored with the AVX software suite through two user-friendly applications. AVX Architect is a desktop app for system diagramming, device configuration, network management, and custom UI design. An unlimited number of processors and expanders can be added to a single project file. AVX Control is a lightweight app offering easy access to custom UIs for controlling and monitoring Soundweb OMNI devices, via Windows, iOS, macOS, Android, and AMX Varia touch panels. These custom UIs also work with Crown DCi amplifiers and previous generation Soundweb London devices. Built on decades of innovation, BSS Soundweb OMNI is a highly scalable and flexible DSP solution. Combining powerful hardware, intuitive software, and developer-friendly features, it effortlessly scales to meet the needs of any installed application. Experience BSS Soundweb OMNI, the new standard in open architecture DSP.

The BSS Soundweb OMNI 32e Open Architecture I/O Expander offers the ability to onramp and offramp Analog/AES3 to/from Soundweb OMNI 512p and 256p Digital Signal Processors. The 32e converts these signals to and from Dante/AES67 for processing by Soundweb OMNI DSPs. The all-new design ensures the seamless handling of today’s most complex installations to be future-ready to meet the evolving needs of tomorrow. The 32e features 8x8x8 Analog or 16x16x16 AES3 audio channels; 32x32 Dante/AES67 networked audio I/O channels; 24 GPIO ports (fully flexible); enterprise-grade network security; studio quality 60dB microphone pre-amp on all inputs; high resolution DAC and ADC, primary and secondary Dante connections, redundant HControl ports; full-color, front panel LCD with metering; stereo AES3 on every audio connector; and more. Each audio I/O port on Soundweb OMNI I/O Expanders is format configurable as either analog or stereo AES3 and eight of the audio I/O ports are also configurable to be either inputs or outputs. All GPIO ports are configurable as either input or output ports, and their format can be either analog or digital. With support for centralized or distributed DSP topologies, system integrators can add as many Soundweb OMNI processors to a single project file as needed, while still enjoying the simplicity of a single canvas for device configuration. HARMAN's HControl protocol, a human-readable, standards-based, developer-friendly API is also supported. It offers an intuitive, flexible, and powerful alternative to other protocols to support developers working at any scale. Soundweb OMNI systems are configured, controlled, and monitored with the AVX software suite through two user-friendly applications. AVX Architect is a desktop app for system diagramming, device configuration, network management, and custom UI design. An unlimited number of processors and expanders can be added to a single project file. AVX Control is a lightweight app offering easy access to custom UIs for controlling and monitoring Soundweb OMNI devices, via Windows, iOS, macOS, Android, and AMX Varia touch panels. These custom UIs also work with Crown DCi amplifiers and previous generation Soundweb London devices. Built on decades of innovation, BSS Soundweb OMNI is a highly scalable and flexible DSP solution. Combining powerful hardware, intuitive software, and developer-friendly features, it effortlessly scales to meet the needs of any installed application. Experience BSS Soundweb OMNI, the new standard in open architecture DSP.  

The BSS Soundweb OMNI 256p Open Architecture Digital Signal Processor is the most powerful enterprise-grade processor ever developed by BSS. With processing capability that surpasses previous BSS products, the all-new design ensures the seamless handling of today’s most complex installations to be future-ready to meet the evolving needs of tomorrow. The 256p features 256x256 at up to 96kHz Dante/AES67 networked audio channels; enterprise-grade network security support; an onboard scripting engine developed by AMX; 24/48kHz and 24/96kHz supported bit depth/sample rates; 8 GPIO ports (fully flexible); 80 AEC channels; 32 VoIP lines; high precision word clock and BNC clock (in/out); dual redundant power supplies, Dante and HControl; 128 channel internal media player with 500GB SSD; full-color, interactive front panel LCD; and more. Every GPIO port is format (analog or digital) and directionally (input or output) configurable. Any channel can also be configured to function as a digital binary, to provide 0 or 5 volts, or configured to receive or send any voltage between 0 and 12 volts. The Soundweb OMNI family also includes two I/O Expanders, the 32e and 16e, which provide unparalleled I/O flexibility as needed. The integrated 128 channel internal media player facilitates the playback of pre-recorded audio files directly from an internal 500GB SSD. This is useful for announcements, paging chimes, advertisements, background soundscapes, and more. Supporting up to 80 AEC channels and 32 VoIP lines, the 256p provides seamless integration capability with building phone systems to ensure efficient and reliable communication. The onboard scripting engine allows previous generation BSS Soundweb Contrio EC wall controller devices to control new Soundweb OMNI devices, while also allowing new AVX software to integrate previous generation BSS Soundweb London DSPs and Crown DCi amplifiers into a unified custom UI, directly alongside Soundweb OMNI. With support for centralized or distributed DSP topologies, system integrators can add as many Soundweb OMNI processors to a single project file as needed, while still enjoying the simplicity of a single canvas for device configuration. HARMAN's HControl protocol, a human-readable, standards-based, developer-friendly API is also supported. It offers an intuitive, flexible, and powerful alternative to other protocols to support developers working at any scale. Soundweb OMNI systems are configured, controlled, and monitored with the AVX software suite through two user-friendly applications. AVX Architect is a desktop app for system diagramming, device configuration, network management, and custom UI design. An unlimited number of processors and expanders can be added to a single project file. AVX Control is a lightweight app offering easy access to custom UIs for controlling and monitoring Soundweb OMNI devices, via Windows, iOS, macOS, Android, and AMX Varia touch panels. These custom UIs also work with Crown DCi amplifiers and previous generation Soundweb London devices. Built on decades of innovation, BSS Soundweb OMNI is a highly scalable and flexible DSP solution. Combining powerful hardware, intuitive software, and developer-friendly features, it effortlessly scales to meet the needs of any installed application. Experience BSS Soundweb OMNI, the new standard in open architecture DSP.

The BSS Soundweb OMNI 16e Open Architecture I/O Expander offers the ability to onramp and offramp Analog/AES3 to/from Soundweb OMNI 512p and 256p Digital Signal Processors. The 16e converts these signals to and from Dante/AES67 for processing by Soundweb OMNI DSPs. The all-new design ensures the seamless handling of today’s most complex installations to be future-ready to meet the evolving needs of tomorrow. The 16e features 4x4x4 Analog or 8x8x8 AES3 audio channels; 16x16 Dante/AES67 networked audio output channels; 12 GPIO ports (fully flexible); enterprise-grade network security; studio quality 60dB microphone pre-amp on all inputs; high resolution DAC and ADC, primary and secondary Dante connections, redundant HControl ports; full-color, front panel LCD with metering; stereo AES3 on every audio connector; and more. Each audio I/O port on Soundweb OMNI I/O Expanders is format configurable as either analog or stereo AES3 and four of the audio I/O ports are also configurable to be either inputs or outputs. All GPIO ports are configurable as either input or output ports, and their format can be either analog or digital. With support for centralized or distributed DSP topologies, system integrators can add as many Soundweb OMNI processors to a single project file as needed, while still enjoying the simplicity of a single canvas for device configuration. HARMAN's HControl protocol, a human-readable, standards-based, developer-friendly API is also supported. It offers an intuitive, flexible, and powerful alternative to other protocols to support developers working at any scale. Soundweb OMNI systems are configured, controlled, and monitored with the AVX software suite through two user-friendly applications. AVX Architect is a desktop app for system diagramming, device configuration, network management, and custom UI design. An unlimited number of processors and expanders can be added to a single project file. AVX Control is a lightweight app offering easy access to custom UIs for controlling and monitoring Soundweb OMNI devices, via Windows, iOS, macOS, Android, and AMX Varia touch panels. These custom UIs also work with Crown DCi amplifiers and previous generation Soundweb London devices. Built on decades of innovation, BSS Soundweb OMNI is a highly scalable and flexible DSP solution. Combining powerful hardware, intuitive software, and developer-friendly features, it effortlessly scales to meet the needs of any installed application. Experience BSS Soundweb OMNI, the new standard in open architecture DSP.

● 32 bit DSP, 48kHz sampling rate, 24bit AD/DA convert.

● Each analog input channel with +48V phantom power, MIC/LINE input gain switchable, MIC input sensitivity adjustable.

● Input including, low-cut, independent feedback inhibition, 5 band PEQ, noise gate, gain, mute, phase, link adjustment and volume adjustment.

● Output including X-over, 7 band PEQ, Gain, mute, compressor/limiter, phase, delay and link. Adjustment and volume adjust.

● All PEQ Gain, bandwidth, frequency continues adjustment. type can be select by PEAK, H-SHELF, L-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.

● All inputs/outputs can do Matrix, and all the input and output channel name can be changed.

● All the input and output with independent phase curve adjust function, PEQ style choose ALLPASS1 is 180°curve adjust, ALLPASS2 is 360° curve adjust.

● All high cut, low-cut filter type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.

● Noise gate's threshold, time, ratio can be adjustment for inputs, compessor, limiter, ratio, time can be adjustment for outputs.

● Maximal delay time 680mS for all input/output channels.

● Pre settings can copy for every single channel, every channel can do link adjust.

● Every input and output channel PEQ curve adjusting picture can be found when you are in any input and output.

● Inside single generator(pink, white noise and 20~20K sine wave, amplitude adjustable ).

● Front panel has level indicator for input/output ,USB port, power supply, net port indicator light. Plug-in USB port and net port. PC one-button connection easy for user’s operations.

● 21 user presets, device and each preset can be save and recall. Password protection function for high level applications.

● Unique assembly aluminum side plate card slot design, can assemble two identical machines into one standard 1U machine. Also can assemble its side ear to the standard cabinet.

The AMX Enova® DVX-2265-4K 6x2+1 All-In-One Presentation Switcher is a unified audio, video, and control device that replaces the need for numerous individual components and eliminates the integration and reliability challenges that accompany them.

This compact 2U presentation switcher features class-leading video quality with support for 4K60 4:4:4 video, HDMI 2.0, HDCP 2.2, and HDR.

The DVX leverages HARMAN’s legendary audio technology. A 120-watt Crown DriveCore amplifier, audio processing by BSS, and the latest dbx feedback suppression work together to ensure that users enjoy the highest quality audio experience.

The DVX-2265-4K is a simple to install, flexible solution, perfectly suited for dramatically simplifying AV control and distribution in small to medium-sized conference rooms, boardrooms, and classrooms. Ease-of-use features include a mobile-friendly HTML5 web interface, automatic binding of DXLink endpoints on the isolated ICSLan network of the NX-Series Integrated Controller, and power on every DXLink input and output. Dante audio inputs and outputs complement analog audio inputs and outputs allowing the DVX to be used in a multitude of situations. The DVX’s DXLink inputs and outputs are compatible with other AMX devices, such as the Enova DGX, as well as standard HDBaseT devices allowing the DVX to be integrated into enterprise-wide designs simply and cleanly.

The AMX Enova® DVX-3266-4K 8x4+2 All-In-One Presentation Switcher is a unified audio, video, and control device that replaces the need for numerous individual components and eliminates the integration and reliability challenges that accompany them.

This compact 2U presentation switcher features class-leading video quality with support for 4K60 4:4:4 video, HDMI 2.0, HDCP 2.2, and HDR.

The DVX leverages HARMAN’s legendary audio technology. A 120-watt Crown DriveCore amplifier, audio processing by BSS, and the latest dbx feedback suppression work together to ensure that users enjoy the highest quality audio experience.

The DVX-3266-4K is a simple to install, flexible solution, perfectly suited for dramatically simplifying AV control and distribution in medium to large conference rooms, boardrooms, and classrooms. Ease-of-use features include a mobile-friendly HTML5 web interface, automatic binding of DXLink endpoints on the isolated ICSLan network of the NX-Series Integrated Controller, and power on every DXLink input and output. Dante audio inputs and outputs complement analog audio inputs and outputs allowing the DVX to be used in a multitude of situations. The DVX’s DXLink inputs and outputs are compatible with other AMX devices, such as the Enova DGX, as well as standard HDBaseT devices allowing the DVX to be integrated into enterprise-wide designs simply and cleanly.

The DSi 2.0 amplifier family, JBL’s first line of dedicated cinema amplifiers, builds on Crown DSI Digital Screen Array amplifier technology, integrating best-in-class DSP from Crown’s flagship CDi DriveCore series to deliver potent, cost-effective amplification for JBL’s entire range of cinema loudspeakers. Choose from three power configurations, available in analog and analog-plus-digital “D” versions featuring Dante/AES67 connectivity.

Deploy systems faster and easier while streamlining hardware needs: DSi 2.0 amplifiers are designed to meet power requirements of JBL cinema speakers, for a single JBL cinema solution. D-models interface with Dolby Atmos directly, without the need for additional processing hardware. JBL Cinema Speaker presets simplify configuration, optimize playback audio and protect against equipment damage. All DSi 2.0 amps feature SNMP connectivity for networked audio distribution, immersive installations and direct interfacing with third-party theater-management and cinema-control systems.

Models supply 4 channels of amplification with bridgeable outputs in a single 2RU footprint, and can power up to four JBL surround speakers with a single amp channel in high-power-density 2Ω mode. All DSi 2.0 series amps incorporate best-in-class, 32-bit/96kHz floating-point DSP and Crown DriveCore technology, which replaces hundreds of internal components with a single processing chip for superior power density, stability and audio fidelity.

Cinema managers and integrators looking to maximize their power investment and future-proof their systems can count on the JBL DSi 2.0 series to deliver robust, reliable amplification in an efficient, cost-effective package.

Musicrown's DL Dante Connect Box series is an I/O interface. Musicrown's DL Dante Connect Box series is an I/O interface.

• High quality A/D(24-Bit), D/A(32-Bit) convert, 48KHz sampling rate.
• DL2.2 is 2 channel balanced MIC/LINE XLR input, 2 channel balance XLR output.
• DL2.0 is 2 channel balanced MIC/LINE XLR input.
• DL0.2 is 2 channel balance XLR output.
• Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup. Digital audio channel can support 2IN/2OUT, using 24-bit precision and extremely low network latency.
• Each input channel with independent signal light and gain control, also with +48V phantom power controlled by switch. Input channel 1 has high resistance switch select, support guitar, bass, keyboard musical instruments equipment input; input channel 2 extra with two group stereo input port (pair RCA input and one 3.5 socket), supporting media player, notebook computer and other equipments signal input.
• Each output channel with independent signal light.
• Dante can be used in the standard existing network interchanger, has highly interoperability: perfect cooperation with other start using Dante device.
• Outer connect +12VDC power supply, Power switch independently controlled and power indicator light.

DL Series:

• DL2.2 is 2 channel balanced MIC/LINE XLR input, 2 channel balance XLR output
• ●  DL2.0 is 2 channel balanced MIC/LINE XLR input
• ●  DL0.2 is 2 channel balance XLR output

Crown Audio's DCi 4|300DA is a four-channel, 300W Power Amplifier with Dante™ / AES67 Networked Audio, 2/4/8Ω and 70V/100V. Crown Audio's DCi 4|300DA is a four-channel, 300W Power Amplifier with Dante™ / AES67 Networked Audio, 2/4/8Ω and 70V/100V. For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport.

Crown Audio's DCi 4|600DA is a four-channel, 600W Power Amplifier with Dante™ / AES67 Networked Audio, 2/4/8Ω and 70V/100V. Crown Audio's DCi 4|600DA is a four-channel, 600W Power Amplifier with Dante™ / AES67 Networked Audio, 2/4/8Ω and 70V/100V. For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport.

Musicrown's Dante DLS is a Dante interface card. Musicrown's Dante DLS is a Dante interface card. 

• High quality A/D(24-Bit)、D/A（24-Bit）convert, 48KHz sampling rate. Has extremely low network latency.
• Network audio and local audio channel quantity can support maximum at 4IN/4OUT, can satisfy all kinds of application requirement.
• Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup.
• Dante can be used in the standard existing network interchanger, has highly interoperability: perfect cooperation with other start using Dante device.
• +5VDC power supply.

DLS Series:

• DLS 2.0 - 2 analog input, 2 Dante output
• DLS 0.2 - 2 analog output, 2 Dante input
• DLS 2.2 - 2 analog input/output, 2 Dante input/output
• DLS 4.0 - 4 analog input, 4 Dante output
• DLS 0.4 - 4 analog output, 4 Dante input
• DLS 4.4 - 4 analog input/output, 4 Dante input/output

Musicrown's DMH DSP is a Dante interface card.  Musicrown's DMH DSP is a Dante interface card. 

• 32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.
• 8X8 core matrix, which includes 4 local input channels, 4 local output channels, 4 Dante input channels and 4 output channels.
• Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup. Digital audio channel can support 4IN/4OUT, using 24-bit precision and extremely low network latency.
• Input including low-cut, 5 band PEQ, noise gate, gain, mute, phase, link adjustment and volume adjustment.
• Output including X-over, 7 band PEQ, Gain, mute, compressor/limiter, phase, delay and link adjustment and volume adjustment.
• All PEQ Gain, bandwidth, frequency continues adjustment. Type can be select by PEAK, H-SHELF, L-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.
• All high cut, low-cut filter type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.
• Noise gate's threshold, time, ratio can be adjustment for inputs, compressor, limiter, ratio, time can be adjustment for outputs.
• Maximal delay time 680mS for all input/output channels.
• Inside single generator(pink, white noise and 20~20K sine wave, amplitude adjustable ).
• Hardware with 7 channel I/O monitor, 4 channels support AD sampling potentiometer, 3 channels I/O support temperature, level, fault sampling function.
• 21 user presets, device and each preset can be save and recall alone. Password protection function for high level applications.
• PC software support Dante port link, and display automatically searched IP address at rear time. One-button linkage easy for use’s operation more convenient and swift.
• Module power supply is DC5V 2A.
• Module size is 135mmx52mm.

DMH Series:

• DMH 2.0 - 2 analog input, 2 Dante output
• DMH 0.2 - 2 analog output, 2 Dante input
• DMH 2.2 - 2 analog input/output, 2 Dante input/output
• DMH 4.0 - 4 analog input, 4 Dante output
• DMH 0.4 - 4 analog output, 4 Dante input
• DMH 4.4 - 4 analog input/output, 4 Dante input/output

Musicrown's DMS DSP is a Dante interface card.  Musicrown's DMS DSP is a Dante interface card. 

• 32 bit SHARC DSP processing, 48kHz sampling rate, 24 bit AD/DA convert.
• 8X8 core matrix, support 4 input channels, 4 output channels, far-end support 4 channels digital input and 4 channels digital output.
• Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup. Digital audio channel can support 4IN/4OUT, using 24-bit precision and extremely low network latency.
• DSP input channel including noise gate, gain, mute, phase, link adjustment.
• DSP output channel including X-over, 7 band PEQ, Gain, mute, compressor/limiter, phase, delay and link adjustment.
• All PEQ Gain, bandwidth, frequency continues adjustment. Type can be select by PEAK, H-SHELF, L-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.
• All high cut, low-cut filter type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.
• Noise gate's threshold, time, ratio can be adjustment for inputs, compressor, limiter, ratio, time can be adjustment for outputs.
• Maximal delay time 680mS for all input/output channels.
• Inside single generator(pink, white noise and 20~20K sine wave, amplitude adjustable).
• Hardware with 4 channel I/O monitor, supporting temperature, level, fault data sampling.
• 30 user presets, device and each preset can be save and recall alone. Password protection function for high level applications.
• PC software support USB, network TCP IP, Dante port on-line, real-time display of automatically searched IP address, One-button linkage easy for user’s operation more convenient and swift.
• Module power supply mode is DC9V-12V 1A.
• Module size is 100mmx66mmx40mm.

DMS Series:

• DMS 2.0 - 2 analog input, 2 Dante output
• DMS 0.2 - 2 analog output, 2 Dante input
• DMS 2.2 - 2 analog input/output, 2 Dante input/output
• DMS 4.0 - 4 analog input, 4 Dante output
• DMS 0.4 - 4 analog output, 4 Dante input
• DMS 4.4 - 4 analog input/output, 4 Dante input/output

Musicrown's DF4.4MN is a network digital matrix processor. Musicrown's DF4.4MN is a network digital matrix processor.

• 32 bit DSP process, 48kHZ sampling rate, 24-bit AD/DA convert.
• 8X8 core matrix, which includes 4 local input channels, 4 local output channels, 4 Dante input channels and 4 Dante output channels.
• Dante digital audio 4IN/4OUT Network interface (2xRJ-45), using 24-bit precision, the internal can distribute with the DSP signal’s 4IN/4OUT route.
• Dante's advanced Network synchronization technology, can provide low latency, low shaking rate and high sampling precision. Can be used in high performance digital media Network audio and video facilities, radio broadcast and sound recording system. It has all advantages of the CobraNet and EtherSound, such as no compress digital audio signal, ensures the good sound quality effect.
• Each analog input channels with +48V phantom power, MIC/LINE input gain switchable, MIC input sensitivity adjustable.
• Input including low cut, independent feedback inhibition, 5 band PEQ, noise gate, gain, mute, phase, linkage adjustment and volume adjustment.
• Output including X-over, 7 band PEQ, Gain, mute, compressor/limiter, phase, delay, linkage adjustment and volume adjustment.
• All PEQ Gain, bandwidth, frequency continues adjustment. Type can be select by PEAK, H-SHELF, L-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.
• All inputs/outputs can do Matrix, and all the input and output channel name can be changed.
• All the input and output with independent phase curve adjust function, PEQ style choose ALLPASS1 can realize 180º curve adjust, ALLPASS2 can realize 360º curve adjust.
• All high cut, low-cut filter type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.
• Noise gate’s threshold, time can be adjustment for inputs, compressor, limiter, ratio, time can be adjustment for outputs.
• Maximal delay time 680mS for all output channels.
• Pre setting can copy for every single channel, every channel can do link adjust.
• Every input and output channel frequency response curve situation can be found when you are in any input and output.
• Intergrated single generator (pink, white noise and 20-20K sine wave, amplitude adjustable).
• Front panel has level indicator for input/output, USB port, power supply, network indicator light. Plug-in Dante digital audio port at rear panel, can search for all ID in same segment net when connect PC software
• One-button connection easy for user’s operations.
• 21 user presets, device and each preset can be save and recall. Password protection function for high level applications.
• Unique assembly aluminum side plate card slot design, can assemble two identical machines into one standard 1U machine. Also can assemble its side ear to the standard cabinet.

Musicrown's DF8.8MNE is a network digital matrix processor. Musicrown's DF8.8MNE is a network digital matrix processor.

• 32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.
• 18x16 channels whole sound mixing matrix design, including 8 local analog input channels, 8 local analog output channels, 8 Dante network input channels and 8 Dante network output channels, 1 AUX internal sound mixing channel, 1 double effector internal marshaling channel.
• Fully supports scalable DANTE digital network audio card and AEC automatic echo noise cancellation card, the users can freely configure and choose according to their requirements.
• Dante digital network audio card configuration is a double standard network interface, which fully supports the functionof unite switching and hot backup, hardware system can distinguish automatically, can use immediately when it inserts. Software internal and local analog signal can realize fully sound mixing matrix processing. Each channel has independent DSP processing function.
• AEC automatic echo cancellation card has powerful automatic echo cancellation function, automatic feedback cancellation and system environmental noise filtering. Effectively reducing the pickup of the speakers and the terrible echo which caused by the reflection of wall. It can also eliminates environmental noise that generated by the feedback of pickup, moreover the noise of air conditioner and fan. Making sure any environment have a noise-free, high definition audio and video system for many conference applications.
• AUX channel has powerful mixing function, such as threshold, level, attack time, release time, continually, adjustment, also with the automatic function of camera-tracking, threshold, level, attack& release time. And has independent PEQ processing function.
• Unique design for EFX channel, has professional ECHO&REVERB double engine multiple stereo effectors inside.
• Can realize the meeting according to different voices to beautify and modify personalized , and also perfectly support various performance and karaoke effector requirement, very suitable for conference rooms, multifunctional halls, hotels, private clubs and other complex, with multiple function demand for the occasion.
• Each analog input channels with +48V phantom power, MIC/LINK input gain switchable, MIC input sensitivity adjustable.
• Input including low cut, independent feedback inhibition, PEQ, noise gate, gain, mute, phase, linkage adjustment and volume adjustment.
• Output including X-over, PEQ, Gain, mute, compressor/limiter, phase, delay, linkage adjustment and volume adjustment.
• All PEQ Gain, bandwidth, frequency continues adjustment. Type can be select by PEAK, L-SHELF, H-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.
• All high cut, low cut type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.
• Noise gate’s threshold, time, ratio can be adjustment for inputs, compressor, limiter, ratio, time can be adjustment for outputs.
• Maximal delay time 680mS for all output channels.
• Pre settings can copy for every single channel, every channel can do link adjust.
• Inside single generator(pink, white noise and 20-20K sine wave, amplitude adjustable).
• Front panel has level indicator for input/output, USB port, standard Ethernet remote control RJ45 port and RS232&485 at rear panel. IP and ID address can set, network and unite management can realize maximal 250 units link control, but also has remote visit password protected function, make the system more stable and safe.
• Design has thorough control code, fully support the third-party centre control and management, including all volume control, preset scene recall, parameter inquire and return code, current level return display, every input and output channels control. Etc.
• 12 user presets can be save and recall, system work in power-off memory status, ensure the date would not lose.

Musicrown's DF16.8MNE is a network digital matrix processor. Musicrown's DF16.8MNE is a network digital matrix processor.

• 32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.
• 22x12 channels whole sound mixing matrix design, including 16 local analog input channels, 8 local analog output channels, 4 Dante network input channels and 4 Dante network output channels, 1 AUX internal sound mixing channel, 1 double effector internal marshaling channel.
• Fully supports scalable DANTE digital network audio card and AEC automatic echo noise cancellation card, the users can freely configure and choose according to their requirements.
• Dante digital network audio card configuration is a double standard network interface, which fully supports the function of unite switching and hot backup, hardware system can distinguish automatically, can use immediately when it inserts. Software internal and local analog signal can realize fully sound mixing matrix processing. Each channel has independent DSP processing function.
•  AEC automatic echo cancellation card has powerful automatic echo cancellation function, automatic feedback cancellation and system environmental noise filtering. Effectively reducing the pickup of the speakers and the terrible echo which caused by the reflection of wall. It can also eliminates environmental noise that generated by the feedback of pickup, moreover the noise of air conditioner and fan. Making sure any environment have a noise-free, high definition audio and video system for many conference applications.
•  AUX channel has powerful mixing function, such as threshold, level, attack time, release time, continually, adjustment, also with the automatic function of camera-tracking, threshold, level, attack& release time. And has independent PEQ processing function.
• Unique design for EFX channel, has professional ECHO&REVERB double engine multiple stereo effectors inside. Can realize the meeting according to different voices to beautify and modify personalized , and also perfectly support various performance and karaoke effector requirement, very suitable for conference rooms, multifunctional halls, hotels, private clubs and other complex, with multiple function demand for the occasion.
• Each analog input channels with +48V phantom power, MIC/LINK input gain switchable, MIC input sensitivity adjustable.
• Input including low cut, independent feedback inhibition, PEQ, noise gate, gain, mute, phase, linkage adjustment and volume adjustment.
• Output including X-over, PEQ, Gain, mute, compressor/limiter, phase, delay, linkage adjustment and volume adjustment.                                                               
• Front panel has level indicator for input/output, USB port, standard Ethernet remote control RJ45 port and RS232&485 at rear panel. IP and ID address can set, network and unite management can realize maximal 250 units link control, but also has remote visit password protected function, make the system more stable and safe.
• Design has thorough control code, fully support the third-party centre control and management, including all volume control, preset scene recall, parameter inquire and return code, current level return display, every input and output channels control. Etc.
• 12 user presets can be save and recall, system work in power-off memory status, ensure the date would not lose.

Musicrown's DF16.16MNE is a network digital matrix processor. Musicrown's DF16.16MNE is a network digital matrix processor.

• 32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.
• 48x48 channels core matrix design, including 16 local analog input channels, 16 local analog output channels, 32 Dante network input channels and 32 Dante network output channels.
• Fully supports scalable DANTE digital network audio card and AEC automatic echo noise cancellation card, the users can freely configure and choose according to their requirements.
• Dante digital network audio card configuration is a double standard network interface, which fully supports the function of unite switching and hot backup, hardware system can distinguish automatically, can use immediately when it inserts. Software internal and local analog signal can realize fully sound mixing matrix processing. Each channel has independent DSP processing function.
• Optional AEC automatic echo cancellation card has powerful automatic echo cancellation function, automatic feedback cancellation and system environmental noise filtering. Effectively reducing the pickup of the speakers and the terrible echo which caused by the reflection of wall. It can also eliminate environmental noise that generated by the feedback of pickup, moreover the noise of air conditioner and fan. Making sure any environment have a noise-free, high definition audio and video system for many conference applications.
• Each analog input channels with +48V phantom power, MIC/LINK input gain switchable, MIC input sensitivity adjustable.
• Input including low cut, independent feedback inhibition, PEQ, noise gate, gain, mute, phase, linkage adjustment and volume adjustment.
• Output including X-over, PEQ, Gain, mute, compressor/limiter, phase, delay, linkage adjustment and volume adjustment.
• All PEQ Gain, bandwidth, frequency continues adjustment. Type can be select by PEAK, L-SHELF, H-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.
• All high cut, low cut type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.
• Noise gate’s threshold, time, ratio can be adjustment for inputs, compressor, limiter, ratio, time can be adjustment for outputs.
• Maximal delay time 680mS for all output channels.
• Pre settings can copy for every single channel, every channel can do link adjust.
• Inside single generator(pink, white noise and 20-20K sine wave, amplitude adjustable).
• Front panel has level indicator for input/output, USB port, standard Ethernet remote control RJ45 port and RS232&485 at rear panel. IP and ID address can set, network and unite management can realize maximal 255 units link control, but also has remote visit password protected function, make the system more stable and safe.
• Design has thorough control code, fully support the third-party centre control and management, including all volume control, preset scene recall, parameter inquire and return code, current level return display, every input and output channels control. Etc.
• 12 user presets, device and each preset can be save and recall alone. System can chose work at immediate storage status, adjusted parameter can store at preset immediately.

The DGX3200-ASB-DAN is an audio switching board kit featuring direct Dante networked audio feeds to and from the Enova DGX 800/1600/3200 enclosures. The DGX3200-ASB-DAN is an audio switching board kit featuring direct Dante networked audio feeds to and from the Enova DGX 800/1600/3200 enclosures. The boards support 8 discrete stereo decoded inputs and 8 discrete stereo encoded outputs. This allows for independent routing of decoded inputs, or breakaway to decoded audio outputs, into a networked audio system such as HARMAN’s BSS. Additionally, the kits feature audio breakaway, downmixing, and a host of DSP functionality such as EQ, volume control, and stereo summing on every path.  Features

• Direct Dante Integration into the Enova DGX – Reduces the physical installation time for inserted and extracted audio paths from the Enova DGX system as Dante network enabled signals
• Easy Integration with Dante Enabled Devices including HARMAN BSS and Crown – Allows for simple decision making when specifying companion DSP to the Enova DGX switching solution
• Simplified Integration with Building-Wide Audio – Utilizing Dante, the industry’s most standard networked audio format, integration of traditional Centralized AV and networked audio is quick and easy
• Audio Breakaway Switching – audio breakaway switching functionality allows for flexible combining of audio and video signals even if they originated from different sources
• Integrated DSP Including a 10-Band Parametric EQ on Every Output – Audio equalization allows the sound in each zone to be tuned specifically to match the individual audio characteristics of each environment.  After easy setup with the integrated web GUI, the same audio source can be heard perfectly in each zone regardless of acoustical differences.

The DGX6400-ASB-DAN is an audio switching board kit featuring direct Dante networked audio feeds to and from the Enova DGX 6400 enclosure. The DGX6400-ASB-DAN is an audio switching board kit featuring direct Dante networked audio feeds to and from the Enova DGX 6400 enclosure. The boards support 16 discrete stereo decoded inputs and 16 discrete stereo encoded outputs. This allows for independent routing of decoded inputs, or breakaway to decoded audio outputs, into a networked audio system such as HARMAN’s BSS. Additionally, the kits feature audio breakaway, downmixing, and a host of DSP functionality such as EQ, volume control, and stereo summing on every path Features

• Direct Dante Integration into the Enova DGX – Reduces the physical installation time for inserted and extracted audio paths from the Enova DGX system as Dante network enabled signals
• Easy Integration with Dante Enabled Devices including HARMAN BSS and Crown – Allows for simple decision making when specifying companion DSP to the Enova DGX switching solution
• Simplified Integration with Building-Wide Audio – Utilizing Dante, the industry’s most standard networked audio format, integration of traditional Centralized AV and networked audio is quick and easy
• Audio Breakaway Switching – audio breakaway switching functionality allows for flexible combining of audio and video signals even if they originated from different sources
• Integrated DSP Including a 10-Band Parametric EQ on Every Output – Audio equalization allows the sound in each zone to be tuned specifically to match the individual audio characteristics of each environment.  After easy setup with the integrated web GUI, the same audio source can be heard perfectly in each zone regardless of acoustical differences.

The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. These amplifiers feature an efficient design with network control/monitoring, high-level DSP with JBL tunings, and 2Ω/4Ω/8Ω/70V/100V direct output compatibility.

The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. These amplifiers feature an efficient design with network control/monitoring, high-level DSP with JBL tunings, and 2Ω/4Ω/8Ω/70V/100V direct output compatibility.

The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. These amplifiers feature an efficient design with network control/monitoring, high-level DSP with JBL tunings, and 2Ω/4Ω/8Ω/70V/100V direct output compatibility.

32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.14x12 channels whole sound mixing matrix design, including 8 local analog input channels, 8 local analog output channels, 4 Dante network input channels and 4 Dante network output channels, 1 AUX internal sound mixing channel, 1 double effector internal marshaling channel. 32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.14x12 channels whole sound mixing matrix design, including 8 local analog input channels, 8 local analog output channels, 4 Dante network input channels and 4 Dante network output channels, 1 AUX internal sound mixing channel, 1 double effector internal marshaling channel. Fully supports scalable DANTE digital network audio card and AEC automatic echo noise cancellation card, the users can freely configure and choose according to their requirements. Dante digital network audio card configuration is a double standard network interface, which fully supports the function of unite switching and hot backup, hardware system can distinguish automatically, can use immediately when it inserts. Software internal and local analog signal can realize fully sound mixing matrix processing. Each channel has independent DSP processing function.