Cart
← Back to Product Catalog

Omni 16e

I/O Interfaces

More Details

Similar Products

Dante官网logo
  • BARE

BARE – D-10

Features： The exquisite and minimal structural design highlights the modern atmosphere and conforms to ergonomics. Special electret capacitive dual microphone core design, clear and bright sound quality, high sensitivity; Support mainstream network audio protocols, use network cables to connect to the switch, and transmit audio in the network to realize signal interconnection and intercommunication; Use POE (Power over Ethernet) for power supply; The entire expandable Dante system has 512 two-way audio channels; Original microphone adjustable directivity technology, supports 5 modes: omnidirectional, cardioid directivity, super cardioid directivity, sharp cardioid directivity, figure 8 directivity, etc. Equipped with 5 switch mode options: 1. Power-on mute mode, then press to speak; 2. Power-on speaking mode, and then press mute; 3. Long press the speaking mode to release the mute; 4. Long press the mute mode to release the speech; 5. , Voice control mode; Customizable remote control switch Anti-radio frequency and mobile phone interference; The base is equipped with damping rubber to effectively reduce the noise caused by external vibration to the microphone.
    I/O Interfaces
See the product
fp-nml2_400px
  • RDL

RDL – FP-NML2

The FP-NML2 is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output is individually switch-selectable to mic or line level. The FP-NML2 is ideal for adapting standard audio amplifiers or equipment to a Dante network. Model FP-NML2P operates from PoE. The FP-NML2 is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output is individually switch-selectable to mic or line level. The FP-NML2 is ideal for adapting standard audio power amplifiers, or other audio equipment, to a Dante network. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level with greater than 18 dB of headroom. The FP-NML2 operates from 24 Vdc and is available in a PoE version: FP-NML2P. If PoE power and an external 24 Vdc supply are both feeding an FP-NML2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
See the product
Dante官网logo
  • BARE

BARE – BE-1608D

The network audio processor is a network audio processor with 32 inputs (16 analog and 16 digital) and 24 outputs (8 analog and 16 digital), using the industry-leading ADI DSP SHARC21489, The highest operating frequency can reach 450MHz. The input and output modules of the DSP can be customized according to the actual situation. At the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic mixing, threshold automatic mixing and other processing modules to meet the needs of audio processors and transmissions in various places. Such as meeting rooms, multi-function halls, conference center auditoriums, administrative centers, etc.
    I/O Interfaces
See the product