Dante-enabled Product Catalog

The SLB 115A is a small active compact line array speaker system designed to achieve high fidelity and ultra high definition amplification in small and medium sized applications. Lightweight and flexible with excellent performance, compact box design and special mounting components make installation easy and quick.

The SLB 115A active Linear array ULTRA-low frequency speaker has a built-in three-channel power amplifier module with a high-performance digital signal processing system. Two full-frequency channels drive the system with three SLA 206, and the remaining channel drives the ULTRA-low frequency SLB 115A. With two balanced line input and one signal output port, plus one power input and output port, fully meet the use requirements, but also convenient system expansion. With the high performance 2 in 3 out DSP digital audio signal processor, various scene parameters can be set according to different application requirements and different number of speakers. Through the control software setting and quick key selection, greatly simplifies the system construction process, full frequency channel and ultra low frequency channel can be adjusted independently, can achieve the best effect in a very short time. The SLB 115A uses a high-efficiency class D power amplifier design, a patented L-shaped heat dissipation design combined with an integrated cast aluminum back plate for heat dissipation, resulting in a high energy conversion efficiency of up to 2x700W+1800W, while being compact and stable in performance.

Technical parameters：

Speaker model: CNET10D

Speaker type: 10" Active two-division loudspeaker

Unit configuration: 10"(250mm) woofer 1.5"(34mm) Treble driver

Frequency response: 70Hz-20kHz

Rated power: 120W

Sound pressure level: 116dB

Sensitivity: 90dB

Rated impedance: 8Ω

Directivity (H×V) : 80°×70°

Dante Digital network interface: 2×RJ45 interface

Analog interface: 1×XLR Balanced input，1×XLR Balanced output

Active power amplifier module: 200W

Volume knob control: Yes

Central control interface: RS232

Size (mm) : 308×480×290 (W×H×D)

◆ High power density and light body weight, not only can meet the needs of large sound amplification system, but also easy to carry and install;

◆ Powerful DSP functions, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

◆ Accurate and intuitive status indicator and LCD function display, working status;

◆ Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

◆ Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

◆ Precise and sensitive temperature detection and protection, to ensure that the machine work within a safe range during heating.

Technical parameters：

Product Model: Q6000i

Product type: Four-channel Dante digital power amplifier

8 Ω power: 4×1500W

4 Ω power: 4×2500W

2 Ω power: 2×2500W

Analog audio signal: Maximum input level +18dB

Digital Audio signal: 24/20 bit 48KHz

Corresponding frequency (20-20khz) : + -1dB

THD + N: <0.5%

Dynamic range: 120dB

Ambient humidity: <90%

Damping coefficient: >200

Signal to noise ratio: >105dB

Technical parameters：

Speaker model: CNET8D

Speaker type: 8" Active two-division loudspeaker

Unit configuration: 8"(200mm) woofer 1"(25mm) Treble driver

Frequency response: 80Hz-19kHz

Rated power: 100W

Sound pressure level: 115dB

Sensitivity: 92dB

Rated impedance: 8Ω

Directivity (H×V) : 80°×80°

Dante Digital network interface: 2×RJ45 interface

Analog interface: 1×XLR Balanced input，1×XLR Balanced output

Active power amplifier module: 100W

Volume knob control: Yes

Central control interface: RS232

Size (mm) : 250×391×235 (W×H×D)

◆ High power density and light body weight, not only can meet the needs of large sound amplification system, but also easy to carry and install;

◆ Powerful DSP functions, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

◆ Accurate and intuitive status indicator and LCD function display, working status;

◆ Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

◆ Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

◆ Precise and sensitive temperature detection and protection, to ensure that the machine work within a safe range during heating.

Technical parameters：

Product Model: Q3200i

Product type: Four-channel Dante digital power amplifier

8 Ω power: 4×800W

4 Ω power: 4×1200W

2 Ω power: 4×1500W

Bridge: 4×2500W

Analog audio signal: Maximum input level +18dB

Digital Audio signal: 24/20 bit 48KHz

Corresponding frequency (20-20khz) : + -1dB

THD + N: <0.5%

Dynamic range: 120dB

Ambient humidity: <90%

Damping coefficient: >200

Signal to noise ratio: >105dB

Technical parameters：

Speaker model: CNET6D

Speaker type: 6.5" Active two-division loudspeaker

Unit configuration: 6.5"(165mm) woofer 1"(25mm) Treble driver

Frequency response: 100Hz-18kHz

Rated power: 50W

Sound pressure level: 113dB

Sensitivity: 89dB

Rated impedance: 8Ω

Directivity (H×V) : 80°×80°

Dante Digital network interface: 2×RJ45 interface

Analog interface: 1×XLR Balanced input，1×XLR Balanced output

Active power amplifier module: 100W

◆ High power density and light body weight, not only can meet the needs of large sound amplification system, but also easy to carry and install;

◆ Powerful DSP functions, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

◆ Accurate and intuitive status indicator and LCD function display, working status;

◆ Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

◆ Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

◆ Precise and sensitive temperature detection and protection, to ensure that the machine work within a safe range during heating.

Technical parameters：

Product Model: Q2400i

Product type: Four-channel Dante digital power amplifier

8 Ω power: 600W X4

4 Ω power: 1000W X4

Analog maximum input： 22dBu

AES maximum input： 0dBS

Dante input： 48k

Frequency response： 20-20KHz +/- 1dB

THD+N： <0.8%

Damping coefficient： 150

Signal to noise ratio： 100

Working voltage： 180V-240V

Technical parameters：

Speaker model: CA-412DA

Speaker type: Active Speaker

Unit composition: 12×4" Full frequency unit

Frequency response: 90Hz-17kHz （-10dB）

Sensitivity: 98dB

Rated impedance: 6Ω

Sound pressure level: 130dB（peak）

Rated power: 360W

Horizontal coverage Angle: 100°x30°-40°，Electronic control

◆ High power density and light body weight, not only can meet the needs of large sound amplification system, but also easy to carry and install;

◆ Powerful DSP functions, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

◆ Accurate and intuitive status indicator and LCD function display, working status;

◆ Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

◆ Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

◆ Precise and sensitive temperature detection and protection, to ensure that the machine work within a safe range during heating.

Technical parameters：

Product Model: Q1200i

Product type: Four-channel Dante digital power amplifier

8 Ω power: 300W X4

4 Ω power: 600W X4

Analog maximum input： 22dBu

AES maximum input： 0dBS

Dante input： 48k

Frequency response： 20-20KHz +/- 1dB

THD+N： <0.8%

Damping coefficient： 150

Signal to noise ratio： 100

Working voltage： 180-240V

Technical parameters：

Speaker model: CA-408DA

Speaker type: Active Speaker

Unit composition: 8×4" Full frequency unit

Frequency response: 95Hz-17kHz （-10dB）

Sensitivity: 96dB

Rated impedance: 6Ω

Sound pressure level: 126dB（peak）

Rated power: 240W

Horizontal coverage Angle: 100°x30°-40°，Electronic control