PA1203-D2 is a DSP class-D amplifier module used in active speakers. Based on DSP signal processing technology, network technology, class-D amplifier and switching power supply technology. Configured with 2-channel Dante input interface to easily integrate into Dante network audio system.
* 2*500W4Ω or 1*1000W8Ω
*DSP process module: DA14CL/D
*support 180-265VAC input
*IPS colorful display
*Connet by 2*RJ45 of network or USB free-driver
PA1203-D2 is a DSP class-D amplifier module used in active speakers. Based on DSP signal processing technology, network technology, class-D amplifier and switching power supply technology. Configured with 2-channel Dante input interface to easily integrate into Dante network audio system.
* 2*500W4Ω or 1*1000W8Ω
*DSP process module: DA14CL/D
*support 180-265VAC input
*IPS colorful display
*Connet by 2*RJ45 of network or USB free-driver
GPA410_D4 is a 4-channel class-D amplifiers with DSP functions and touch screen display, Integrated with 4 analog and 4 channel AES3 digital input, optional 4 channel Dante input. Each channel can select the signal independently and set the priority to realize the signal redundancy backup function. Power, current, voltage, temperature and impedance of power amplifier can be monitored in real time, and power limit and current and voltage limit can be set freely. Application used in performance and conference.
*support 4 channel *8Ω1000W
*support constant voltage and constant resistance: 8Ω, 4Ω, 100V, 70V
*FIR function, 4*2048 TAPS
*4.3 inch IPS display, 2U size
*Voltage operation with support for 180/264VAC
*Mconsole software control by network with 2*RJ45
NPA43-D4 is a 4*300W8Ω class-D amplifier, which configures with 4-channel Dante input interface and DSP processing solution such as compressor, limiter, noise gate, parameter equalization, matrix routing, delay, etc. Suitable for various scene with demands of sound reinforcement system. The whole series of products are equipped with TCP/IP communication interface, mobile phone App control, GPIO extension control and Mconsole unified management.
◆ Optional 4-channel Dante network audio input
◆ Support Mconsole and app TCON network control
◆ IPS color LCD
◆ Built in DSP digital processor
◆ Multiple control modes are supported: USB、TCP/IP、RS232、RS485
◆ Monitor the working state of power amplifier
◆ Call and standby the amplifier by remote
◆ Support balanced XLR input and unbalanced RCA input
◆ Support stereo, bridge, mono, matrix mode,switch by software
◆ Input sensitivity 0dBU / 6dbu setting by software or LCD
◆ Power on state: Power On/Standby
◆ Constant Pressure and Resistance support:100V、70V、8Ω、4Ω
NPA23-D2 is a 2*300W8Ω class-D amplifier, which configures with 2-channel Dante input interface and DSP processing solution such as compressor, limiter, noise gate, parameter equalization, matrix routing, delay, etc. Suitable for various scene with demands of sound reinforcement system. The whole series of products are equipped with TCP/IP communication interface, mobile phone App control, GPIO extension control and Mconsole unified management.
◆ Optional 2-channel Dante network audio input
◆ Support Mconsole and app TCON network control
◆ IPS color LCD
◆ Built in DSP digital processor
◆ Multiple control modes are supported: USB、TCP/IP、RS232、RS485
◆ Monitor the working state of power amplifier
◆ Call and standby the amplifier by remote
◆ Support balanced XLR input and unbalanced RCA input
◆ Support stereo, bridge, mono, matrix mode, switch by software
◆ Input sensitivity 0dBU / 6dbu setting by software or LCD
◆ Power on state: Power On/Standby
◆ Constant Pressure and Resistance support:100V、70V、8Ω、4Ω
DAP0306_D4 is a 3in6out analog professional audio processor, which can achieve a variety of functions as a DSP processor including an integrated compressor, limiter, frequency divider, decelerator, equalizer, mixing matrix, supports 7 brands input and 7 brands output PEQ. It also can be debugged and monitored quickly by exquisite intuitive Mconsole software, for the construction of professional audio amplification system and provides a wide operation space.
★96K24BIT sample rate
★4 input channels DEQ and 1024 FIR, 8 output channels 512*FIR
★Control interface: USB and RJ45 by TCPIP protocol, configuring RS232, RS485 central control interface, supporting GPIO external expansion control interface
★Support Mconsole and app TCON network control
★Support presets archiving and locking, hide setting parameters"
MAP08A_D8 is an 8-in-8-out auto-mixing media matrix, equipped with 8 analog inputs and 8 analog outputs, built-in feedback suppression, automatic mixing, AEC ,ANC, matrix mixing, equalizer, distributor, compressor and other DSP functions. This device supports 8 channel Dante network audio function expansion. It can be connected to computer software control via USB driver-free , RS232, RS485, TCP / IP connection and remote control. It is suitable for sound reinforcement projects in various occasions.
"★8 analog inputs and 8 analog outputs, support selecting microphone input and line input
★Optional 8-channel Dante network audio input and output
★9-level sensitivity adjustment for each microphone input
★48V phantom power switch for each input
★With AEC (echo cancellation), ANC (noise cancellation), use for interactive video teleconference
★Each input is equipped with AFC
★With Automix and matrix mixing
★Input 16 PEQs and output 10 PEQs
★With camera tracking control function
★Control interface: USB and RJ45 by TCPIP protocol, configuring RS232, RS485 central control interface, supporting GPIO external expansion control interface
★Support Mconsole and app TCON network control
★Support QB01A wire control
★Support presets archiving and locking, hide setting parameters"
MAP0808M_D4 is equipped with 8 analog inputs and 8 analog outputs, optional 4 channels Dante network audio input and output.
★8 analog inputs and 8 analog outputs, support selecting microphone input and line input
★Optional 4-channel Dante network audio input and output
★9-level sensitivity adjustment for each microphone input
★48V phantom power switch for each input
★Each input is equipped with AFC
★With Automix and matrix mixing
★Input 31 PEQs and output 10 PEQs
★With camera tracking control function
★Control interface: USB and RJ45 by TCPIP protocol, configuring RS232, RS485 central control interface, supporting GPIO external expansion control interface
★Support Mconsole and app TCON network control
★Support QB01A wire control
★Support presets archiving and locking, hide setting parameters"
DAP0408_D4 is a 4in8out analog professional audio processor, which can achieve a variety of functions as a DSP processor with integrated compressor, limiter, frequency divider, decelerator, equalizer, mixing matrix, supports 7 brands input and 7 brands output PEQ. It also can be debugged and monitored quickly by exquisite intuitive Mconsole software, for the construction of professional audio amplification system and provides a wide operation space.
★96K24BIT sample rate
★4 input channels DEQ and 1024 FIR, 8 output channels 512*FIR
★Control interface: USB and RJ45 by TCPIP protocol, configuring RS232, RS485 central control interface, supporting GPIO external expansion control interface
★Support Mconsole and app TCON network control
★Support presets archiving and locking, hide setting parameters"
The ARS-200-DH Dante Audio Stream to HDMI Audio converter is designed for presentation environments where audio needs to be converted from one format to the other where long-distance transmission is involved.
Dante audio is being received by the ARS-200-DH while it is also receiving video input via HDMI. In this case, the ARS-200-DH merges the audio with the HDMI signal so that it can feed external displays. The ARS-200-DH outputs stereo audio (20 hertz- 20 kilohertz) with a frequency response of 20 Hz-20 kHZ. Maximum video resolution is 4096×2160 / 3840×2160@60Hz (4:4:4) and both the video input and the video loopback ports are HDMI Type A female connectors.
The ARS-200-HD HDMI Audio to Dante Audio converter is designed for presentation environments where audio needs to be converted from one format to the other where long-distance transmission is involved.
The ARS-200-HD is a tool for extracting audio from, for example, a DVD player and converting the audio stream to Dante format. This enables the audio signals to be transmitted over long distance and used with Public Address (PA) systems — ensuring that everyone can hear the sound that accompanies the visuals. The converter/interface uses an HDMI Type A female connector for HDMI input and an HDMI Type A female connector for video loopback output. The HDMI input and loopback output maximum supported video resolution is 4096×2160 / 3840×2160@60Hz (4:4:4).
VIO L1610 is a three-way active line array system, entirely equipped with neodymium components:
2x10" woofers (2.5” v.c.), providing an extended LF reproduction, interact with a coaxial neodymium component (4” MF plus a 2,5” v.c. HF compression driver) mounted on an exclusively designed waveguide.
This unique coaxial symmetric acoustic design results into the most accurate transient reproduction, which enables VIO L1610 to deliver the most detailed and homogeneous audio performance.
In facts, the coaxial component not only allows an extended low end reproduction of the MF, but guarantees a perfect off-axis coherence alongside with all the benefits coming from woofers' direct radiation, much to the advantage of the system’s headroom.
Dante Card [Optional]
Red 8Line has a total of 58 inputs and 64 outputs, including two Red Evolution mic pres, independent L/R monitor outs, eight balanced line inputs and outputs on DB25 connectors; 32 channels of Dante I/O; 16-channel ADAT input and output (at 48kHz), and stereo S/PDIF input and output. As with other Red interfaces, it features professional-grade 24-bit/192kHz A-D and D-A conversion for no-compromise, mastering-quality recording and audio playback. With 119dB dynamic range A-D and 121dB dynamic range D-A (A-Weighted), the converters have been expertly selected and calibrated by Focusrite to provide the best balance of sound quality, dynamic range and conversion latency.
The two digitally controlled Red Evolution mic preamps are the product of decades of Focusrite’s impeccable attention to detail in designing audio hardware. Each preamp provides up to 63dB of ultra-clean gain, with individual phantom power, high-pass filter and phase reverse, and an option to stereo-link the two channels. The switchable Air mode mimics the sonic profile of the famous Focusrite ISA 110 input module and breathes life into any signal it touches.
The Focusrite Red Range is the best choice for professionals who work in Pro Tools | HD and other DAWs — on both Mac and PC. With both mini-DigiLink and Thunderbolt 3 connections, it’s possible to instantly switch between Pro Tools | HD and other DAWs without the need to reconfigure your audio settings. Simply change the host mode either in RedNet Control software, or using the front panel, to change DAWs in seconds. This ability to quickly switch between production environments means you’ll never lose that moment of inspiration, or leave your clients waiting.
Red 8Line features the latest implementation of Thunderbolt 3, with Focusrite’s session-proven, ultra-low-latency, rock-solid Thunderbolt drivers. This speed provides the flexibility to use DAW plug-ins in real time, so you can harness the processing power of your DAW to track through plug-ins and record virtual instruments. With two Thunderbolt 3 ports as standard, it’s also possible to daisy-chain Thunderbolt devices, such as third-party plug-in accelerators, hard drives, external 4K displays, processing units and Thunderbolt hubs.
In addition to Thunderbolt 3 and Pro Tools HD connectivity, the on-board Dante connection enables Red 8Line to communicate with industry-standard Audio-over-IP equipment from hundreds of manufacturers. Dante makes it easy to expand your system, embrace new ways of working, and discover rapid system expansion using Focusrite RedNet interfaces or devices from third parties such as Neve, Yamaha and DigiCo.
Red 8Line has built-in monitor control for mono, stereo and multi-channel monitoring environments up to 7.1. Compatibility with the new Focusrite RedNet R1 desktop remote controller allows even greater flexibility, and customised presents for immersive monitoring environments including Dolby Atmos®.
Other features of the Red 8Line include precision metering and display: the interface has three LCD displays for highly accurate level metering for any input or output block, as well as main monitor and headphone outputs. Two discrete high-fidelity headphone outputs are powerful enough to deliver loud and clear audio on high impedance headphones and are controlled from the interface front panel. Dual instrument inputs on the front panel ensure you always have immediate access to quickly plug in a guitar, for example, even when racked.
The RedNet Control 2 is a software mixer with a hardware-focussed workflow, which is designed to allow quick setup of both simple and complex monitoring and routing configurations, together with controlling Red Evolution preamps remotely. This allows tighter integration with RedNet equipment over Dante.
RedNet R1 enables users to interact with their audio system like never before. It provides the flexibility to control a range of different monitor output setups, ranging from mono through to 7.1.4 surround, including Dolby Atmos® and other immersive audio workflows. Alternatively, completely custom setups of up to 12 outputs can be configured for bespoke speaker configurations. RedNet R1 can be used to control groups of outputs from a Red interface’s multitude of sources and destinations, including from Pro Tools | HD and other DAWs, analogue inputs and outputs, ADAT and S/PDIF connections, and from entire Dante audio ecosystems, simultaneously and interchangeably.
RedNet R1 supports a maximum of eight input sources from 32 available audio channels, across analogue, digital, DAW and Dante connections, and mixes and routes signals to up to 12 monitor output channels. Top-panel control includes level, reference level preset selection, cut, dim, mute and a variety of solo modes. There’s an A/B switch for switching between numerous monitoring presets, and up to four fold-down presets allow fast switching for checking downmixes. Custom cue mixes can be sent to talent from any of the 32 available inputs.
RedNet R1 also features a Dante-enabled talkback section, internal mic-pre and a high-powered headphones output, so you can interact with your Dante system like never before. Up to four talkback destination groups are available when used with a Red interface. (When used with other Dante devices, a single talkback group is available.) RedNet R1 has an internal microphone, or users can connect their own microphone via the rear-panel XLR. The high-fidelity headphone output is powerful enough to deliver high-SPL audio to high-impedance headphones.
RedNet R1 features two LCD displays for highly accurate level metering of the outputs, sources and headphone outputs, and for giving visual cues for navigating around menus. The unit is configured using RedNet Control 2, the software manager designed primarily for ease of use in quickly setting up both simple and complex monitoring and routing configurations. Other features of the RedNet R1 include a quarter-inch jack socket, which accepts a footswitch for talkback management, LFE muting and more. It can be powered via Ethernet to reduce cabling complexity (using the PoE standard), or by a DC power supply.
The RedNet D16R MkII is a 16-channel bi-directional AES3 interface for Dante® networks. The 1U rackmount device features individual input and output channel level controls, allowing for precise calibration and control of all input and output levels using RedNet Control. RedNet D16R MkII features power supply and Ethernet redundancy with auto switchover in case of failure.
Various connection options make RedNet D16R MkII a flexible addition to any Audio-over-IP system. A pair of DB25 multipin connectors each connect eight channels of AES3 I/O into and out of the interface, while XLR and RCA ports enable two-channel AES3 and S/PDIF connections, respectively, to be made.
Sample rate conversion on every input enables external equipment to operate at different sample rates, and DARS signals are accepted on the XLR connector. Word Clock I/O on BNC connectors allows synchronisation to house clock, or syncing external equipment to the Dante network.
RedNet A16R MkII is a 16-channel analogue Interface for Dante networks, with two channels of AES3 I/O. Individual input and output channel level controls allow for precise adjustment of all I/O levels using RedNet Control. With two power supplies and primary and secondary etherCON network connectors, RedNet A16R MkII is perfect for critical-path applications in recording, post-production, live sound and broadcast. Built-in redundancy features allow for silent fail-over in the event of power or network outage, providing reassurance for system technicians.
Analogue inputs and outputs are connected through four rear-panel AES59-configured DB25 connectors, while an additional pair of AES3 I/O is provided through male and female XLR for added flexibility. The XLR input can accept DARS signals in addition to AES3. Word Clock I/O on BNC connectors allows external devices to clock to RedNet A16R MkII, or alternatively allows RedNet A16R MkII to act as a network clock grand master, synchronised to external input. RedNet A16R MkII is well suited to permanent installation and repeated strike and setup: all connectors lock and remain terminated even under stress, providing worry-free installation and peace of mind once situated in a rack. In addition, all Focusrite Pro products come with a three-year warranty and award-winning customer support.
The AM-3825 audio monitor separates the audio signal (embedded audio) superimposed on each SDI signal of 12G, 6G, 3G, HD, and SD from the video signal, and monitors the audio using the built-in speaker or headphones.
It features AES, MADI, Dante (ST 2110-30 compatible), analog and abundant audio input / output interfaces.
● Supports a wide variety of video formats
● Equipped with abundant audio input / output interfaces
● Loudness measurement function
● Simultaneous monitoring of up to 32 channels of audio is possible
● L / R speaker is standard equipment
● LCD display with excellent visibility
● Preset Functions
● User button function
● Downmix function
● Control function by GPIO remote controller
● Alarm output function to external devices
● Space-saving housing
● Compatible with AC power supply
The Connect Series 84D is a 4-channel amplifier with 80 watts per channel. As part of the Dante CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for small to medium-scale installations. The 84D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable.
Then there’s the Cloud…DANTE CONNECT SERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems. Register for your free LEA Cloud account at leaprofessional.cloud
The DANTE CONNECT SERIES also features analog inputs and Dante inputs and external I/O control for remote on/off and fault monitoring.
The AVN-AO16R audio converter and interface converts up to sixteen analogue outputs from the Dante Audio-over-IP networking standard. Dual Ethernet ports allow the unit to operate in redundant mode, ensuring audio routing is maintained in the event of loss of link on either of the network connections.
This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All analogue outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.
The AVN-AIO8R audio converter and interface converts up to eight analogue inputs and eight analogue outputs to and from the Dante Audio-over-IP networking standard. Dual Ethernet ports allow the unit to operate in redundant mode, ensuring audio routing is maintained in the event of loss of link on either of the network connections.
This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All analogue inputs and outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.
The AVN-AI16R audio converter and interface converts up to sixteen analogue inputs to the Dante Audio-over-IP networking standard. Dual Ethernet ports allow the unit to operate in redundant mode, ensuring audio routing is maintained in the event of loss of link on either of the network connections.
This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All analogue inputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.
The AVN-AI16 audio converter and interface converts up to sixteen analogue inputs to the Dante Audio-over-IP networking standard. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All analogue inputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.
The AVN-AESIO8R audio converter and interface converts up to eight digital stereo AES3 inputs and eight digital stereo AES3 outputs to and from the Dante Audio-over-IP networking standard. Each input can accept sample rates from 32kHz to 192kHz, which will be sample rate converted to the Dante system sample rate. A valid input signal is confirmed by front panel AES3 lock LEDs for each input. All outputs follow the Dante system sample rate.
Dual Ethernet ports allow the unit to operate in redundant mode, ensuring audio routing is maintained in the event of loss of link on either of the network connections. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All digital AES3 inputs and outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link and Clock.
The AVN-AESIO8 audio converter and interface converts up to eight digital stereo AES3 inputs and eight digital stereo AES3 outputs to and from the Dante Audio-over-IP networking standard. Each input can accept sample rates from 32kHz to 192kHz, which will be sample rate converted to the Dante system sample rate. A valid input signal is confirmed by front panel AES3 lock LEDs for each input. All outputs follow the Dante system sample rate.
This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All digital AES3 inputs and outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link and Clock.
The SCD1010 is a cost effective Dante Commentary box supporting one commentator. Network connection may be fibre or copper and it has full network redundancy. Microphone amplifier gain and many other adjustments such as phantom power and limit levels may be controlled remotely via the SCD1010's web server. In addition to the commentary box functions there is a built in Dante breakout box with three analogue inputs and six analogue outputs. These inputs and outputs have level controls and may be assigned to local commentary box or network functions, the SCD1010 may even be used as a standalone analogue unit. The SCD1010 can operate at sample rates of 48kHz and 96kHz and may be powered 240V mains, 12 volt or PoE.
The B-DF4 is a network four channel four wire unit in a compact aluminium beltpack enclosure.
With four audio inputs and four audio outputs it will meet the most demanding beltpack requirements. The B-DF4 has a built in speaker so may be used as a handy four wire box.
B-DF4 front
The talk buttons can be programmed to operate push to talk, latching or 'smart' (tap to latch, push to talk). When selected to talk the buttons illuminate red.
Listen input(s) may be enabled/disabled in conjunction with the listen select switch. Buttons may be set to flash on incoming audio.
Programming the B-DF4 is simple using the OLED display which also shows line input and output levels during normal operation.Power may be supplied Power over ethernet (PoE) or a 9-16 volt external DC supply.
The Q-SYS NV-32-H (Core Capable) is a multipurpose, software-configurable video endpoint native to the Q-SYS Ecosystem, offering two distinct operating modes to choose between, based on the needs of the application. ‘Core Mode’ enables a consolidated Q-SYS AV processor, control engine, and local 3 x 2 HDMI video switcher to support video collaboration in small and medium-sized meeting rooms and classrooms. It features 32 x 32 network audio channel capacity, eight channels of software-based AEC, along with onboard audio I/O via HDMI, USB and 3.5 mm. ‘Peripheral Mode’ allows native HDMI and audio distribution without additional control processors, bridges or complicated programming. The NV-32-H (Core Capable) also lets you integrate Q-SYS video cameras and audio via USB into all major UC&C conferencing applications. Like all Q-SYS devices, the NV-32-H (Core Capable) offers native integration and control, simplifying setup, configuration and firmware management while eliminating the need for advanced programming knowledge.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
Activation instructions:
