DiGiCo – DQ-Rack


More details

Similar Products

db-audiotechnik-ds10_600px|db-audiotechnik-ds10_600px
  • d&b audiotechnik

d&b audiotechnik – DS10

The DS10 Audio network bridge interfaces between Dante networks and AES3 digital audio signals, while also providing distribution of Ethernet control data The DS10 Audio network bridge interfaces between Dante networks and AES3 digital audio signals, while also providing distribution of Ethernet control data. Positioned within the signal chain in front of the amplifiers, this 1 RU device expands the d&b system approach in both mobile and installation environments. Each unit can deliver up to sixteen Dante network channels via AES3 digital signal outputs. The AES3 channel streams from the DS10 carry meta data with Dante channel labels and cabling information to the four channel d&b amplifiers. Additionally, four AES3 input channels provide access to the Dante audio network for applications such as a break-in from a Front of House console. The DS10 incorporates an integrated 5-port switch, offering a primary and redundant network for the Dante protocol, as well as advanced functions such as Multicast Filtering and VLAN modes. This extensive switch flexibility provides extended connectivity for a laptop to control the d&b amplifiers using the R1 Remote control software via the OCA (Open Control Architecture) protocol. Using the DS10 Audio network bridge, audio signals and remote control data can be combined using a single Ethernet cable. The front panel of the DS10 is designed to match the I/O panel of the D80 Touring rack assembly. This ensures a simple integration within existing system configurations. The DS10 features a power supply suitable for mains voltages 100 V – 240 V, 50 – 60 Hz, with Overvoltage protection of up to 400 V.
    I/O Interfaces
500554_AF_Small_v2-600x884
  • Muxlab

Muxlab – Bluetooth Audio to Dante Interface

The Bluetooth Audio to Dante Interface (Model 500554) is a two-way audio transmission panel for Bluetooth and Dante. It connects to mobile phones, iPad, and other devices through Bluetooth interface, and converts the received audio signal into digital signal transmission through Dante network. Power, control, and audio data are transmitted by only one network cable, and there is no need to worry about ground loops or other audio issues. The Bluetooth Audio to Dante Interface is designed to be compatible with standard single gang US wallboxes with Decora faceplates.
    I/O Interfaces
attero-tech-unDX4I|attero-tech-unDX4I
  • Attero Tech by Q-SYS

Attero Tech by Q-SYS – unDX4I

The unDX4I is a 4 input, 2-gang wall plate interface that also includes two outputs. The unDX4I DanteTM Audio Interface is a cost effective multi‐IO wall box. The unDX4I features four balanced mic/line XLR inputs and two balanced line outputs on a Phoenix connector. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX4I is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT‐5 cable. The unDX4I’s size and IO density make it easy to put Dante connectivity wherever it’s needed ‐ near the audio source or sink ‐ thereby eliminating costly and interference prone analog wiring.
    I/O Interfaces