Introducing the Q-SYS Core 8 Flex and Q-SYS Core Nano audio, video and control (AV&C) processors by QSC, which extend the applications of the Q-SYS Ecosystem into a wider range of smaller-scale installations across corporate, higher education, healthcare and beyond. Built on the same foundational technology as the rest of the Q-SYS processor portfolio including the best-in-class Q-SYS Core 110f, these processors are designed for applications with lower network channel capacity and/or targeted processing requirements.
Core 8 Flex offers onboard analog audio I/O PLUS network AV&C processing, while Core Nano offers a purely network AV&C processing (and addresses the wide-spread adoption of network peripherals and centralized topology). Both processors can process and route up to 64x64 network channels and include 8 x 8 channels of software-based Dante (with the option to license up 32 x 32 Dante channels.)
The JOKER is a three-commentator unit. It includes all the features needed for sports commentators, such as making the antenna, sends and returns as well as monitoring talkback individually configurable.
The JOKER has an IP port and an embedded web server. This allows both the specific programming of the equipment in controls and secondly to take control of remote commands, without specific software.
• Three microphones inputs on balanced XLR, two commentators and a guest, with a phantom power supply 12 or 48 volts. • “HELP MODE“ for talking to support engineer. • Luminous ON AIR switches for the three inputs. • Luminous switch to send Talback A and B for commentators 1 and 2 inputs. • ON AIR output is muted when one of the talkback switch is pressed. • The JOKER offers inputs/outputs (GPI/GPO) on a Sub-D 15 pin connector. • IP mode even allows use in stand-alone.
The AVB-D16 bridges AVB and Dante networks allowing up to 16 channels to be sent to and from each network protocol; built-in Asynchronous Sample Rate Conversion ensures precision clock isolation between networks; easily patch up to 16 audio sources on your StudioLive Series III ecosystem products to a Dante network and vice versa.
The PRT666D is a multifunctional microphone desk with Dante connectivity. It has been studied to answer many uses in mobile or permanent installation. It includes:
• A microphone preamp with very low noise, adjustment of the sensitivity and 12 or 48 Volts phantom power. • An ON / OFF switch for setting ON AIR with a loop confirmation on GPO opto Mos. • An external switching for ON / AIR by GPI. • Two switches Talkback 1 and 2 with a confirmation loop on GPO opto coupler.
The communication is provided by an RJ45 network cable, conveying both the audio information and the power supply (PoE). The PRT666D has a DANTE Primary port and a DANTE Secondary port (Backup).
Applications: • Commentator desk • Remote reporter desk in an outdoor event. • Antenna simultaneous translation console.
The PCS310 is a built-in headphone amplifier with DANTE connectivity.
Communication is via an RJ45 network cable, carrying both audio information and power (PoE). The headphone output is on the front panel. The PCS310 manages 2 DANTE audio channels as input: • The left channel for the headphone amplifier. • The right channel for the headphone amplifier.
Applications: PCS310 is very useful in the "SPEAK" studios as the presenter and his guests need reception headphones.
The PRF75D is an active headphone amplifier, because of its design this active headphone amplifier is very easily integrable under the studio furniture, without making cuts on the board.
- Communication is provided by an RJ45 network cable, with both audio information and power (PoE)
- The PRF75 D manages 5 DANTE audio channels as input:
• The left channel for the headphone amplifier • The right channel for the headphone amplifier • The left channel for audio monitor output • The right channel for audio monitor output • The Talkback channel for talkbacks to headphones
- PRF75D is equipped with DANTE Primary port and DANTE Secondary port (Back up).
- The headphone output can be done on the front panel as well as on the rear panel for a possible deporting of the headphones.
- Monitor output allows you to connect a pair of monitor active speakers
The SNA DANTE is a sound level limiter system for large music hall and nightclubs. it is the first sound level limiter on the market that integrates this technology.
The sound level pressure is measured by the acoustic sensor, then it is transmitted to the processor that integrates music peaks with a very gentle slope, and adjustable rise time and fall time, thus no limitation degrades the signal dynamics like a traditional compressor.
Selection of the A and/or C weighting for sound analysis.
An Embedded Web Server allows consulting the sound level history and equipment setting. The memory is dimensioned to store the values of acoustic pressure 24 hours a day and 7 days a week, for 6 months.
USB Host for connecting a USB stick for collecting history.
8 audio channels could be processed simultaneously
Acoustic and electric Auto-verification of the measuring sensor.
The Livemix LM-DANTE-EXP2 is a user installable option card for the MIX-16 and MIX-32. This input option card is for connecting to your Dante digital network. Audinate’s Dante technology is a widely accepted and highly reliable standard for networked audio, especially in live and studio sound applications.
When using the Dante input option card (LM-DANTE-EXP2), the Livemix system integrates seamlessly into a Dante network. All the network subscriptions can be made using the touchscreen on the Livemix CS-SOLO or CS-DUO for quick and easy setup. Channels can be setup with a single “Import 1-24” button or each channel can be individually subscribed across multiple devices. Using the Import Names feature, channel names can be assigned to the Livemix channels.
The M2T half-rack transmitter houses two stereo transmitters to provide two stereo audio channels, and for up to four mono audio channels in a single rack space. The audio inputs can be individually configured to be analog or Dante compatible. The analog input connectors are full-size XLR/TRS combo types for balanced line-level analog signals while the input preamp circuits use a special balanced amplifier with very high common mode rejection to minimize hum and noise.
A Dante™ Ultimo™ interface via dual RJ45 connectors accepts Dante networked audio inputs and can daisy chain the digital stream to additional units via CAT6 cables. An additional RJ45 jack provides an Ethernet connection for programming and control via Wireless Designer™ software and a USB jack on the front panel allows for firmware updates. The transmitter features a full color, backlit LCD for high visibility in any environment, while the chassis is all-metal and can be racked singly or in pairs using included rack mount hardware.
GlenController automatically finds all compatible devices that it can control on your network and shows them in a list on the left hand side of the screen. Just select the device(s) that you would like to control and a detailed device screen will be provided. It is possible to password protect devices to prevent unauthorised access and adjusting of a device's parameters.
All compatible devices can connect to multiple GlenControllers simultaneously, meaning that several operators in your workflow can access a device and see its levels, gains etc at the same time.
GlenController has built in redundancy. It connects to the devices that it is controlling by both the primary and secondary network interfaces (if available) and, like Dante network audio, it provides seemless backup if one of the two networks should fail.
Many of the device types support remote firmware upgrade from GlenController without the need to use USB. This is very handy if there are many devices on the network, as all of them can be updated simultaneously.
None of the devices that GlenController connects to requires GlenController to be running for them to operate. This means that if the PC that is running GlenController has an issue mid-broadcast then your broadcast audio will not be affected.
GlenController is a secure "sandboxed" UWP-type app, meaning it has restricted access to the host computer. It is digitally signed with a publicly trusted certificate obtained from Sectigo (former Comodo) authority.
FF2470 performs 24-channel DSP beam filtering to steer the vertical radiation pattern, making column high directive and featuring main propagation lobe less dependent on the frequency.
FF2470 is equipped with 24 high quality, coaxial loudspeakers, each one mounting 4” neodymium woofer + 1’’ dome tweeter, capable to transmit perfect audio.
FF2470 uses 24 x 70 Wrms class-D audio amplifiers with excellent THD+N and high efficiency (90%) and completely protected against thermal over-load.
FF2470 mounts high-reliable, switching power supply (1290 W peak) with universal input (90 – 264 VAC).
FF2470 has analog line input and built-in Dante input both.
FF2470 setup comes easy throughout the AVE Line Array User Control PC software, via RS485 connection.
AVE Line Array User Control includes: • Beam tilting/broadening control; • Anti-Reverberation System ARS. • Delay control; • 8-biquads user equalizer with high/low shelving and parametric filters;
FF2470 cabinet is aluminum extrusion and it is designed and manufactured in Germany.
FF0870 performs 8-channel DSP beam filtering to steer the vertical radiation pattern, making column high directive and featuring main propagation lobe less dependent on the frequency.
FF0870 is equipped with 8 high quality, coaxial loudspeakers, each one mounting 4” neodymium woofer + 1’’ dome tweeter, capable to transmit perfect audio.
FF0870 uses 8 x 70 Wrms class-D audio amplifiers with excellent THD+N and high efficiency (90%) and completely protected against thermal over-load.
FF0870 mounts high-reliable, switching power supply (430 W peak) with universal input (90 – 264 VAC).
FF0870 has analog line input and built-in Dante input both.
FF0870 setup comes easy throughout the AVE Line Array User Control PC software, via RS485 connection.
AVE Line Array User Control includes: • Beam tilting/broadening control; • Anti-Reverberation System ARS. • Delay control; • 8-biquads user equalizer with high/low shelving and parametric filters;
FF0870 cabinet is aluminum extrusion and it is designed and manufactured in Germany.
FF1670 performs 16-channel DSP beam filtering to steer the vertical radiation pattern, making column high directive and featuring main propagation lobe less dependent on the frequency.
FF1670 is equipped with 16 high quality, coaxial loudspeakers, each one mounting 4” neodymium woofer + 1’’ dome tweeter, capable to transmit perfect audio.
FF1670 uses 16 x 70 Wrms class-D audio amplifiers with excellent THD+N and high efficiency (90%) and completely protected against thermal over-load.
FF1670 mounts high-reliable, switching power supply (860 W peak) with universal input (90 – 264 VAC).
FF1670 has analog line input and built-in Dante input both.
FF1670 setup comes easy throughout the AVE Line Array User Control PC software, via RS485 connection.
AVE Line Array User Control includes: • Beam tilting/broadening control; • Anti-Reverberation System ARS. • Delay control; • 8-biquads user equalizer with high/low shelving and parametric filters;
FF1670 cabinet is aluminum extrusion and it is designed and manufactured in Germany.
Axient Digital offers dual and quad receiver options that open the door to a full range of features, from high-performance RF to transparent digital audio.
The AD4Q Four-Channel Digital Receiver sets a new standard in spectral efficiency. Groundbreaking performance features include wide tuning, low latency, High Density (HD) mode, and Quadversity, ensuring solid performance in the most challenging RF environments. Networked control, AES3 + AES67 + Dante™ output, and signal routing options bring a new level of management and flexibility to your entire workflow.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
