The unDX2IO+ Dante™ Audio Interface is a cost effective multi‐IO wall box to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.. The unDX2IO features XLR balanced audio inputs and outputs, switchable mic/line gain and switchable phantom power on the inputs. An additional 2 Balanced line inputs are accessible on side of unit for use with a companion unXP2I passive expansion plate. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+ is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT5 cable.
CONTROL - Audio flow assignment, input gain and phantom power are all controllable via the Dante network connection.
The unDX2IO+ replaces the legacy unDX2IO.
AuviTran Audio ToolBox is a modular audio platform giving access to a large variety of professional audio networked configurations.
With 3 or 7 slots, AVBx3 and AVBx7 can convert microphone, line in, line out, AES EBU, ADAT, MADI, EtherSound or CobraNet to DANTE.
The AVBx3 and AVBx7 can be mounted in Installation or Touring mode for front or rear panel connectors. AVBx7 embed a built in 1024x1024 digital routing matrix.
Accessories such as redundant power supplies, Switch card with Fiber connectors, 128 channels Sample Rate Converter or GPIOs can be added to extend the ToolBox Solution.
AuviTran Audio ToolBox is a modular audio platform giving access to a large variety of professional audio networked configurations.
With 3 or 7 slots, AVBx3 and AVBx7 can convert microphone, line in, line out, AES EBU, ADAT, MADI, EtherSound or CobraNet to DANTE.
The AVBx3 and AVBx7 can be mounted in Installation or Touring mode for front or rear panel connectors. AVBx7 embed a built in 1024x1024 digital routing matrix.
Accessories such as redundant power supplies, Switch card with Fiber connectors, 128 channels Sample Rate Converter or GPIOs can be added to extend the ToolBox Solution.
The D800-Dante A-Net Distributor provides seamless connectivity between a Dante audio network and Aviom Personal Mixers, including the A-16II and new A360.
The Bose® ControlSpace ESP-00 Series II engineered sound processor offers high-quality signal processing through a flexible I/O audio platform. Up to eight mixed analog and digital audio expansion cards (input and/or output), including Dante™ audio networking can be installed to create customized audio systems. Onboard connectivity includes Ethernet, RS-232, expandable GPIO, and support for elegant Bose control centers and volume controls.
The Bose® ControlSpace® ESP-880 engineered sound processor is a single-rack-space DSP with an 8x8 analog audio configuration, built-in 8-channel ESPLink digital output, and an open digital expansion slot ready to accommodate optional network audio cards including Dante™. This model meets today’s strict requirements for high-quality signal processing and control in a cost-effective package. The ESP-880 is designed for a wide variety of applications ranging from small self-contained projects to larger networked applications.
The Bose® ControlSpace® ESP-1240 engineered sound processor is a single-rack-space DSP with an 12x4 analog audio configuration, built-in 8-channel ESPLink digital output, and an open digital expansion slot ready to accommodate optional network audio cards including Dante™. This model meets today’s strict requirements for high-quality signal processing and control in a cost-effective package. The ESP-1240 is designed for a wide variety of applications ranging from small self-contained projects to larger networked applications.
The Bose® ControlSpace® ESP-4120 engineered sound processor is a single-rack-space DSP with an 4x12 analog audio configuration, built-in 8-channel ESPLink digital output, and an open digital expansion slot ready to accommodate optional network audio cards including Dante™. This model meets today’s strict requirements for high-quality signal processing and control in a cost-effective package. The ESP-4120 is designed for a wide variety of applications ranging from small self-contained projects to larger networked applications.
The Bose® PowerMatch PM4250 configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-equipped versions enable network configuration, control and monitoring, and an expansion slot supports input from optional digital audio accessory cards. PowerMatch amplifiers utilize numerous Bose technologies to deliver an unprecedented combination of performance, efficiency and ease of installation—all in a reliable, proprietary design.
The Bose® PowerMatch PM4500 configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-equipped versions enable network configuration, control and monitoring, and an expansion slot supports input from optional digital audio accessory cards. PowerMatch amplifiers utilize numerous Bose technologies to deliver an unprecedented combination of performance, efficiency and ease of installation—all in a reliable, proprietary design.
The Bose® PowerMatch PM8250 configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-equipped versions enable network configuration, control and monitoring, and an expansion slot supports input from optional digital audio accessory cards. PowerMatch amplifiers utilize numerous Bose technologies to deliver an unprecedented combination of performance, efficiency and ease of installation—all in a reliable, proprietary design.
The Bose® PowerMatch PM8500 configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-equipped versions enable network configuration, control and monitoring, and an expansion slot supports input from optional digital audio accessory cards. PowerMatch amplifiers utilize numerous Bose technologies to deliver an unprecedented combination of performance, efficiency and ease of installation—all in a reliable, proprietary design.
Formerly known as BLU-326
The Soundweb London BLU-326DA offers configurable I/O, Dante / AES67 audio, and a high bandwidth, fault tolerant digital audio bus.
The BLU-326DA is configurable through HiQnet™ London Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.
This processor features Dante / AES67 audio with primary and secondary ports for fault tolerance, with control through a separate Ethernet port. As well, the processor includes support for Dante 4.0 firmware for integration with Dante Domain Manager.
The BLU-326DA also features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km.
Four card slots which accommodate analog inputs, analog outputs, digital inputs and digital outputs in banks of four facilitate many different device I/O configurations.
Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets)
Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.
12 Control Inputs and 6 Logic Outputs allow the BLU-326DA to be integrated with GPIO compatible devices.
The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.
The BLU-326DA and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
Formerly known as BLU-806
The Soundweb London BLU-806DA offers configurable I/O, configurable signal processing, Dante / AES67 audio and a high bandwidth, fault tolerant digital audio bus.
The BLU-806DA has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.
This processor features Dante / AES67 audio with primary and secondary ports for fault tolerance, with control through a separate Ethernet port. As well, the processor includes support for Dante 4.0 firmware for integration with Dante Domain Manager.
The BLU-806DA also features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km.
Four card slots facilitate many different device I/O configurations. Each slot can accommodate any of six available I/O cards, including the Analog Input Card, Analog Output Card, Digital Input Card, Digital Output Card, AEC Input Card, and Telephone Hybrid Card. Each card supports four channels.
Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. AEC Input Cards and Telephone Hybrid Cards facilitate specialized processing and interfacing primarily for teleconferencing applications. (Further information about the I/O cards can be found on dedicated datasheets)
Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.
12 Control Inputs and 6 Logic Outputs allow the BLU-806DA to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.
The BLU-806DA and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
The DAD AX32 allows no-compromise audio recording, mastering, post production, and future-proof archiving A new feature is the inclusion of IP audio capabilities handling up to 512 channels on a 10 gigabit per second Ethernet link.
The oratis IF Dante module supports up to 64 bidirectional audio channels. It is fully compatible with Dante’s unique plug and play network integration with automatic device discovery and system configuration. The Ethernet switch incorporated on DELEC’s Dante board is one of the few on the market which already supports the IEEE 802.1BA AVB standard. Each IF Dante board is equipped with four Ethernet ports.
The NetMax N8000 System Controller is a state-of-the-art digital matrix system offering comprehensive management of all aspects of professional sound reinforcement systems. Supporting both distributed and central processing, NetMax is a powerful physical complement to EV's IRIS-Net protocol, which gives designers and end-users the industry’s most flexible routing, DSP, and component-level system control and supervision. EQ, crossovers, dynamics, FIR-Drive loudspeaker optimization — NetMax does it all with superior digital fidelity.
RedNet 1 connects to your network with a single Ethernet cable. It’s remotely controlled via the network and can be placed anywhere in your facility. It offers eight channels of line-level analogue in and out, with Focusrite’s precision 24-bit A-D and D-A conversion for superb audio performance, and 119dB dynamic range at sample rates up to 192kHz. The rear panel includes standard DB25 connectors for analogue patchbay or breakout cable interfacing.
RedNet 2 adds 16 remote-controlled analogue channels in and out to your RedNet network and can be located anywhere you can run an Ethernet cable. Featuring Focusrite’s precision 24-bit A-D and D-A conversion for superb audio performance, it delivers 119dB dynamic range at sample rates up to 192kHz. The rear panel includes standard DB25 connectors for analogue patchbay or breakout cable interfacing.
RedNet 3 interfaces your existing digital audio systems and components to the RedNet network, with up to 32 inputs and outputs and full software remote control. The unit includes support for AES/EBU, S/PDIF and ADAT (16 ADAT optical ports support 32 digital channels in and out – even at 96kHz, with S-MUX2) digital audio formats and allows the RedNet system to be synchronised to incoming signal clock or a word clock source.
RedNet 4 adds eight of the latest remote-controlled Focusrite mic preamps / line inputs to your RedNet system through a single Ethernet cable. With two selectable DI’s, RedNet 4 provides an effective range of analogue inputs for your system. The unit includes Focusrite’s world-class precision A-D conversion. Mic/Line/DI selection, gain, phantom power, HPF and metering are also accessible from the front panel. The benefit of remote control microphone pre-amp gain is that you can keep the mic pre close to the source (so the analogue cable run is minimal) while still setting gain stages from the control room.
RedNet 5 connects your RedNet system to Pro Tools HD®. Up to six units can be connected to one Pro Tools HDX system, supporting up to 192 channels at 96 kHz or 96 channels at 192 kHz. Pro Tools HD® Native and Pro Tools HD® (TDM) are also supported. RedNet 5 is interoperable with other Pro Tools interfaces and no RedNet PCIe card is required.
[Discontinued] For situations in which low-latency performance is critical, such as tracking, the RedNet PCIe card provides the best possible performance for your system. This dedicated card fits into a Windows or Mac computer standard PCIe card slot or with a laptop using a Thunderbolt PCIe Chassis. It delivers up to 128 channels I/O with under 3ms latency dependending on ASIO/Core Audio buffer size. A standard RJ45 Gigabit Ethernet connector links your audio computer to the rest of the network via a GigE switch.
Four Audio's DBO1 is a Dante breakout box providing 8 analog output channels and optional 4 AES outputs or 2 AES inputs + 2 AES outputs with outstanding audio performance values.
Four Audio's HD2 is a high end loudspeaker management system with 2-4 analog inputs, 1 AES input and 4-8 analog outputs. It's outstanding features are a high dynamic input range (>130dB), complex FIR filters with high frequency resolution to the lowest frequencies and a sophisticated limiter concept.
The BLACKBOX BBR64-DANTE RECORDER is designed to record and replay up to 64 channels of audio data from a Dante network. It records at 44.1kHz and 48kHz directly to Broadcast WAV files on an external USB2 drive. (Higher sample rate recording is also accommodated at a reduced track count.)
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
