Cart
← Back to Product Catalog

Focusrite – RedNet 1

I/O Interfaces

More details

Similar Products

RedNet-D16-AES|RedNet-D16-AES
  • Focusrite

Focusrite – RedNet D16 AES

RedNet D16 AES is a 1U 19in rack-mount interface featuring 16 channels of AES/EBU connectivity to and from a Dante audio network, with Ethernet redundancy for maximum network reliability.
    I/O Interfaces
See the product
danacoid
  • Danacoid

Danacoid – DN-210RXC

Video: HDMI v2.0 and HDCP 2.0

Supported resolution: 4096 x 2160 /60P (4:4:4)；

Supports wiring of up to 8 HDMI embedded LPCM digital audio channels, as well as 24bit,192kHz sampling frequency for each sample.

Supports transmission of embedded HBR audio formats: such as Dolby digital true HD and DTS-HD Master Audio.

IP network-based audio, supports transmission of network-based audio via switches

2 * USB ports, supports KVM function

IR Control: Supports bidirectional IR transmission

RS-232 Control: supports bidirectional RS-232 transmission, up to 115,200 baud

HDMI input 1 * 19-pin female HDMI interface

Analog stereo audio: 1 * 3.5mm stereo-mini jack

10GbE and 1GbE ports: 2 * shielding RJ45 interface and LED indicator light

1 * IR input: 3.5mm stereo mini jack

Maximum pixel clock frequency: supports pixel clock frequency up to 594MHz

Switching Plane: independent switching planes supported I/O switch arrays of all connected videos, audios, RS-232 and IR signals

    I/O Interfaces
See the product
symetrix-xIO-4x4_1200px|symetrix-xIO-4x4_1200px
  • Symetrix

Symetrix – xIO 4×4

The cost effective xIO 4x4 increases a system’s analog input and output channel capacity resulting in a reduction in overall price per channel. The cost effective xIO 4x4 increases a system’s analog input and output channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Dante-enabled Symetrix DSP units, each of the four analog inputs’ parameters (5 gain levels, phantom power) and four analog outputs’ parameters (mute), along with bus assignments, are configured using Symetrix Composer open architecture software. xIO 4x4 set up is logical and fast with no requirement to use third party software; there are no mechanical switches or circuit board jumpers to set. Systems are simpler, cost less, and have fewer potential points of failure. A half-rack form factor conserves rack space, or, if preferred, the xIO 4x4 may be surface mounted. Features
  • Audio input (A/D), output (D/A) expander for systems that capitalizes on the surplus DSP of a Dante-enabled Symetrix DSP unit to bring
  • overall system costs down.
  • 4 mic/line inputs, including +48 VDC phantom power, and 4 line outputs with the industry leading performance specifications of Edge and Radius.
  • Configured with Symetrix Composer. No third party software, archaic DIP switches, or complicated front panel menus.
  • Network audio expansion using Dante protocol over standard IT networks. Ultra low latency.
  • Rack mount and surface mount kits sold separately.
    I/O Interfaces
  • Dante Ch: 4x4
  • 24-bit
See the product