RedNet 3 interfaces your existing digital audio systems and components to the RedNet network, with up to 32 inputs and outputs and full software remote control. The unit includes support for AES/EBU, S/PDIF and ADAT (16 ADAT optical ports support 32 digital channels in and out – even at 96kHz, with S-MUX2) digital audio formats and allows the RedNet system to be synchronised to incoming signal clock or a word clock source.
The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 16.0M provides 16 balanced analog audio inputs with terminal block connectors
. Each input accommodates
microphone through line level signals with a gain range of -60 to +24dBu. +48V
phantom power is individually switchable on each input. With Terminal block
termination.
RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming
status.
The Iyo family feature an embedded web server, allowing configuration and
monitoring of input and output levels. Routing is achieved using the Dante
Controller.
Power is provided from a built-in universal AC power supply. Redundant power is
available using an external 12VDC supply via a locking 2.1mm jack.
All units can also be operated in Livewire+ AES67 interoperability mode.
The AVN-AO16 audio converter and interface converts up to sixteen analogue outputs from the Dante Audio-over-IP networking standard. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All analogue outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for POE, Link, and Clock.
