The CMX DSP-4240 is a power amplifier with DSP and Dante.
4 x 60W power amplifier
100V, 70V, 4 Ohm & 8 Ohm output with selectors
Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
Dante network control with 4 In 4 Out matrix
Two Ethernet RJ-45 network connector for both Dante and DSP configure
Remote GPIO for failure outputs
1U height 19” rack mount type power amplifier
Balanced line input by phoenix connector for four channels.
Each four inputs with separate gain control.
Separate four channel indicators for protection, clip, input and output.
Complete short circuit, overload, high temp, clip and DC protection.
Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
The CMX DSP-4120 is a power amplifier with DSP and Dante.
4 x 60W power amplifier
100V, 70V, 4 Ohm & 8 Ohm output with selectors
Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
Dante network control with 4 In 4 Out matrix
Two Ethernet RJ-45 network connector for both Dante and DSP configure
Remote GPIO for failure outputs
1U height 19” rack mount type power amplifier
Balanced line input by phoenix connector for four channels.
Each four inputs with separate gain control.
Separate four channel indicators for protection, clip, input and output.
Complete short circuit, overload, high temp, clip and DC protection.
Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
The CMX DSP-4060 is a power amplifier with DSP and Dante.
4 x 60W power amplifier
100V, 70V, 4 Ohm & 8 Ohm output with selectors
Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
Dante network control with 4 In 4 Out matrix
Two Ethernet RJ-45 network connector for both Dante and DSP configure
Remote GPIO for failure outputs
1U height 19” rack mount type power amplifier
Balanced line input by phoenix connector for four channels.
Each four inputs with separate gain control.
Separate four channel indicators for protection, clip, input and output.
Complete short circuit, overload, high temp, clip and DC protection.
Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
The R210+ is a 210cm active column, which is designed to be mounted vertically.
With a nominal range of 42m, it offers a high-quality alternative for larger spaces in airports, train and underground stations, conference rooms, churches or shopping malls when you need to run the audio over a network.
Ray-On+ is reserved for indoor use, it cannot be subjected directly to rain.
The R110+ is a 110cm active column, which is designed to be mounted vertically.
With a nominal range of 20m, it offers a high-quality alternative for medium sized spaces in airports, train and underground stations, conference rooms, churches or shopping malls when you need to run the audio over a network.
Ray-On+ is reserved for indoor use, it cannot be subjected directly to rain.
The R70+ is an 70cm active column, which is designed to be mounted vertically.
With a nominal range of 12m, it offers a high-quality alternative for smaller spaces in airports, train and underground stations, conference rooms, churches or shopping malls when you need to run the audio over a network.
Ray-On+ is reserved for indoor use, it cannot be subjected directly to rain.
-35개 오디오 입력과 24개 오디오 출력채널 지원 -디지털 오디오 믹서와 시스템 제어 PC 및 단테 네트워크 오디오 통합구성 -20채널 오디오 입력, 14채널 오디오 출력 -Dante BK2 16x16 지원 -통합 방송 환경 운영지원 GUI-외부 모니터 FULL HD 지원 -USB 2.0 2포트 지원 -마우스 키보드 지원-WIDOWS 10 IoT 환경 -10.1" 터치스크린 화면 내장 -EM. Timer 방송 SD Card를 이용한 편집지원 -다양한 롱신제어 환경 제공 -PC와 메인장비의 이중 연동 지원 -디지털 오디오믹서 기능 -EM / CHIME /TIMER /MATRIX 기능 -EM / TIMER SD Card 개별 편집 음원 적용 -SFP Optic 단테를 이용한 무손실 음원 및 통신제어 -내장형 10.1 " 터치 스크린으로 All-in-One 제어 환경 지원 D -PC 기반 유틸리티 프로그램을 사용한 다양한 방송환경 구축
SPECIFICATIONS
입력 및 출력 XLR입력 (6개),TRS입력(3개),XLR출력(8개) 단테 SFP Gigabit 광모듈, RJ45케이블 사용전원 DC+24V, 1.5A 외형규격 (WXHXD)mm 482mmx177mmx350mm 무게 7.0kg
The DAC-122 is an audio matrix, equipped with two inputs, that enables you to send uncompressed audio with low latency using standard TCP/ IP Ethernet network. It’s remotely controlled through your network and can be placed anywhere in a facility.
Each of the 2 balanced analog inputs and 2 outputs may be assigned to any Dante™ flow in the system, either by means of the Audinate’s Dante™ Controller Windows or OSX application.
The D-6000 is a high power professional amplifier specially designed for the sound re-enforcement market also referred to as SR, which incorporates a DSP, Digital Signal Processor and Audinates’s Dante™ digital audio network.
Dante delivers low latency, robust synchronization, I/O scalability, and installation simplicity via standard IT technology.
The D-6000 will deliver up to 4800 watts of power per channel down to 4 ohm loads. Housed in two RU compact frameworks, the D-6000 Class D amplifier offers high power with reduced size and weight.
The combination Class D topology amplification circuitry combined with SMPS (Switch Mode Power Supplies) creates a high efficiency amplifier that offers reduced power consumption and low heat dissipation. The D-6000 is ideal for applications where high power and efficiency is required. This may include houses of worship, arenas, stadiums, concert venues, touring or any other large-scale facilities.
The Yamaha SWR switch lineup, featuring high-performance L2 switches for fixed installations, has been expanded to provide a wider range of models for a wider range of applications.
In addition to VLAN functionality, the new SWR2310-28GT and SWR2310-18GT offer high port counts and features such as 10G uplink ports for long-distance transmission of multichannel 96 kHz data, making them ideal choices for safe, stable backbone operation in large-scale systems. As with other SWR/SWP switches, Yamaha LAN Monitor software provides clear visual system status monitoring that makes Dante system setup easy.
The world's first paperless multimedia congress system, developed by TAIDEN as early as in 2010, has ushered in a new era for the conferencing industry and has been used at many high-profile international conferences and meeting venues, testifying in return to its excellence and superiority.
Not stopping there, TAIDEN later launched its third generation paperless multimedia congress system in 2016. The new system boasts of superb HD paperless
experience, greater system reliability, budget-conscious integration of functions and convenient management with its ultra-thin design, larger capacitive touch screen and higher megapixel camera. Either tabletop or flush-mounted model provides its users with faster, more convenient and efficient operation experience. Another innovative and brand-new member — the dual microphone paperless multimedia congress terminal with an extra backup microphone is also added to the growing product line.
System Features:
Especially designed for high-level meetings, such as Summits, congresses, conventions, parliaments and city councils
The first Paperless Multimedia Congress System in the world
Based on TAIDEN independent intellectual property mMediaCongressTM platform, never subject to viral infection, hacker-proof, safe and reliable
Paperless Multimedia Congress Terminal - equipped with a 14" (1920x1080) HD TFT LCD touch panel, offerrng better paperless event experience including document reading, HD video watching, interactive meeting management (discussion, voting, 64 CHs x 2 interpretation) and meeting services
Capacitive touch panel supporting multi-touch, convenient and efficient for operation
Built-in 8-megapixel camera with flashlight, ingenious video conversation function
Based on TAIDEN originated GMC-STREAM Gigabit Multimedia Congress Stream technology, all audio and video signals are transmitted via a Cat.6 Gigabit network cable. GMC-STREAM fully guarantees the real-time performance and stability of the important data stream of the meeting, such as audio, voting information, and control information
Based on ingenious CongressMatrixTM technology, integrated n×8 audio matrix processor to realize 8 channels group output function
Microphone-array technology for HCS-8368A series
E-ink nameplate can be connected
Optional printed nameplate
Increased reliability with “Closed Loop - Daisy Chain” connection topology
48 kHz audio sampling, 64 audio channels, each with a 30 Hz to 20 kHz frequency response for perfect sound quality
Low power consumption design
Supports Dante protocol to connect to peripheral digital devices without losing any sound quality
Equipped with optical fiber interface to combine two widely separated conference rooms to form one unique coherent system
Dual connection backup via optical fiber and Cat.5 cable between Congress Main Unit and Congress Extension Main Unit
System power controllable by central control system
Supports combining and separating conference rooms
Booth combination & share system
Connectable to multi channel audio input or output devices for versatile expansion of the system
Connection facility for additional condenser or dynamic microphones, expanding user’s application spectrum
Integrated USB interfaces in the Congress Main Unit for system upgrading and saving system parameters. Convenient for system maintenance
Downward compatible with TAIDEN HCS-4100/50 Fully Digital Congress System
IntelliMix®Room is the first audio processing software fully optimized for Shure conferencing microphones and represents nothing less than the future of IT-enabled, high quality audio. The license-based software can be downloaded and deployed to any in-room PC running Windows 10. No custom setups or specialized hardware are needed.
The world's first paperless multimedia congress system, developed by TAIDEN as early as in 2010, has ushered in a new era for the conferencing industry and has been used at many high-profile international conferences and meeting venues, testifying in return to its excellence and superiority.
Not stopping there, TAIDEN later launched its third generation paperless multimedia congress system in 2016. The new system boasts of superb HD paperless experience, greater system reliability, budget-conscious integration of functions and convenient management with its ultra-thin design, larger capacitive touch screen and higher megapixel camera. Either tabletop or flush-mounted model provides its users with faster, more convenient and efficient operation experience. Another innovative and brand-new member — the dual microphone paperless multimedia congress terminal with an extra backup microphone is also added to the growing product line.
The world's first paperless multimedia congress system, developed by TAIDEN as early as in 2010, has ushered in a new era for the conferencing industry and has been used at many high-profile international conferences and meeting venues, testifying in return to its excellence and superiority.
Not stopping there, TAIDEN later launched its third generation paperless multimedia congress system in 2016. The new system boasts of superb HD paperless
System Features:
Especially designed for high-level meetings, such as Summits, congresses, conventions, parliaments and city councils
The first Paperless Multimedia Congress System in the world
Based on TAIDEN independent intellectual property mMediaCongressTM platform, never subject to viral infection, hacker-proof, safe and reliable
Paperless Multimedia Congress Terminal - equipped with a 14" (1920x1080) HD TFT LCD touch panel, offerrng better paperless event experience including document reading, HD video watching, interactive meeting management (discussion, voting, 64 CHs x 2 interpretation) and meeting services
Capacitive touch panel supporting multi-touch, convenient and efficient for operation
Built-in 8-megapixel camera with flashlight, ingenious video conversation function
Based on TAIDEN originated GMC-STREAM Gigabit Multimedia Congress Stream technology, all audio and video signals are transmitted via a Cat.6 Gigabit network cable. GMC-STREAM fully guarantees the real-time performance and stability of the important data stream of the meeting, such as audio, voting information, and control information
Based on ingenious CongressMatrixTM technology, integrated n×8 audio matrix processor to realize 8 channels group output function
Microphone-array technology for HCS-8368A series
E-ink nameplate can be connected
Optional printed nameplate
Increased reliability with “Closed Loop - Daisy Chain” connection topology
48 kHz audio sampling, 64 audio channels, each with a 30 Hz to 20 kHz frequency response for perfect sound quality
Low power consumption design
Supports Dante protocol to connect to peripheral digital devices without losing any sound quality
Equipped with optical fiber interface to combine two widely separated conference rooms to form one unique coherent system
Dual connection backup via optical fiber and Cat.5 cable between Congress Main Unit and Congress Extension Main Unit
System power controllable by central control system
Supports combining and separating conference rooms
Booth combination & share system
Connectable to multi channel audio input or output devices for versatile expansion of the system
Connection facility for additional condenser or dynamic microphones, expanding user’s application spectrum
Integrated USB interfaces in the Congress Main Unit for system upgrading and saving system parameters. Convenient for system maintenance
Downward compatible with TAIDEN HCS-4100/50 Fully Digital Congress System
The SpeechLine Multi-Channel Receiver with its 10 variants in 2 or 4 channels is the perfect addition to the SpeechLine series. Thanks to its unobtrusive design, the Multi-Channel Receiver can be installed quickly and easily in any room, whether on the wall or ceiling. The device can be operated with a single network cable, thanks to PoE and Dante. Complex analog audio cabling is a thing of the past.
The Multi-Channel Receiver also offers a convenient solution for existing installations. Thanks to an integrated auto mixer and the analog mix output, all audio channels can be used simply as a sum signal. The audio mix is also available digitally via Dante, which allows an extension of the existing setup without exchanging the DSP.
Due to the bidirectional communication between receiver and transmitter, all settings of the mobile transmitters can easily be made in the Sennheiser Control Cockpit. The receiver’s automatic frequency management eliminates the need for manual frequency settings and the automatic interference management guarantees maximum transmission reliability.
The user-friendly pairing function ensures a reliable connection between transmitter and receiver. Network integration also makes it possible to remotely control and monitor the receiver via a media control system (e.g. AMX, Crestron). Due to the integrated antennas, a complex antenna installation is no longer necessary.
Features
Automatic Gain Control
Automatic Frequency management
AES 256 encryption
2-port Dante
PoE
Analog Mix Output
One status LED per Link
Remote control via Control Cockpit or media control
Expand Analog I/O Using Dante. For use with Symetrix Radius, Prism and Edge DSPs, the Symetrix Dante I/O Expanders use Composer for setup. Using Composer eliminates switches, circuit board jumpers, and mechanical adjustments as well as the need for third party software applications.
Clear the table for better collaboration. Part of the Bose Work family of conferencing products, the Bose ES1 Ceiling Audio Solution is a complete conferencing system for fully integrated meeting rooms. It combines the premium performance of the Bose EdgeMax in-ceiling loudspeaker and Sennheiser TeamConnect Ceiling 2 microphone — along with a Bose amplifier and DSP — to deliver a seamless meeting experience that empowers productivity. It’s a complete room audio solution, ready for quick deployment and configuration of the electronics, reducing installation time.
Bose EdgeMax EM180 loudspeaker
The EdgeMax EM180 in-ceiling loudspeaker features proprietary Bose PhaseGuide technology. This unique loudspeaker design combines the room-filling coverage patterns typical of larger surface-mount speakers with the architect-preferred aesthetics of in-ceiling models. Designed to mount at the front of the meeting room above the room’s display screen, EdgeMax loudspeakers draw attention toward the screen for a more natural and less fatiguing conferencing experience.
ControlSpace EX-440C processor
With an open-architecture, all-in-one design, the ControlSpace EX-440C conferencing processor facilitates high-quality microphone integration and audio processing for small- to medium-size conference rooms. Various inputs and outputs allow for flexible configuration: four mic/line analog inputs, four analog outputs, onboard VoIP, PSTN, USB, Bose AmpLink output, eight-channel acoustic echo cancelling (AEC), and 16 x 16 Dante® connectivity. ControlSpace Designer software simplifies the setup process with drag-and-drop programming, making configuration quick and easy.
PowerSpace P2600A amplifier
Bose PowerSpace amplifiers enhance any conference room with clean, reliable power — and digital connectivity. The PowerSpace P2600A provides 600 watts per channel, and a Bose AmpLink input allows for multiple channels of uncompressed, low-latency digital audio from Bose DSPs via a single Cat 5 cable.
The native network-capable 4-channel amplifier speaks DANTE and has a unique operating concept. The master-slave assignments allow multiple amplifiers to be controlled in a network without the need for a separate controller or software. This integrated group-access-control represents an absolute novelty in the industry and offers significant added value.
Applications:
Browser based master/slave configuration
Build setups with up to 32 groups
No separate software required
Control of complex large systems
Monitoring of all devices
Preparation of group setups via offline editor
Special Features:
Integrated redundant DANTE™ digital audio networking with AES 67 support
Easy to use front panel interface and web UI for remote access (Win, OSX, Linux, iOS, Android)
The DSi 2.0 amplifier family, JBL’s first line of dedicated cinema
amplifiers, builds on Crown DSI Digital Screen Array amplifier
technology, integrating best-in-class DSP from Crown’s flagship CDi
DriveCore series to deliver potent, cost-effective amplification for
JBL’s entire range of cinema loudspeakers. Choose from three power
configurations, available in analog and analog-plus-digital “D” versions
featuring Dante/AES67 connectivity.
Deploy systems faster and
easier while streamlining hardware needs: DSi 2.0 amplifiers are
designed to meet power requirements of JBL cinema speakers, for a single
JBL cinema solution. D-models interface with Dolby Atmos directly,
without the need for additional processing hardware. JBL Cinema Speaker
presets simplify configuration, optimize playback audio and protect
against equipment damage. All DSi 2.0 amps feature SNMP connectivity for
networked audio distribution, immersive installations and direct
interfacing with third-party theater-management and cinema-control
systems.
Models supply 4 channels of amplification with
bridgeable outputs in a single 2RU footprint, and can power up to four
JBL surround speakers with a single amp channel in high-power-density 2Ω
mode. All DSi 2.0 series amps incorporate best-in-class, 32-bit/96kHz
floating-point DSP and Crown DriveCore technology, which replaces
hundreds of internal components with a single processing chip for
superior power density, stability and audio fidelity.
Cinema
managers and integrators looking to maximize their power investment and
future-proof their systems can count on the JBL DSi 2.0 series to
deliver robust, reliable amplification in an efficient, cost-effective
package.
AHM-64 is a powerful 64x64 Audio Matrix Processor supported by a comprehensive ecosystem of scalable I/O, control and Dante solutions. Designed to excel in corporate, retail, hospitality and education environments, AHM-64 allows integrators to quickly create systems that build from a single boardroom to a complete campus.
Inter-M's compact remote MIC series offer three line-up for easy operate as per environment. RM-VA1000 is a Dante™ based remote MIC station which can be used with "EVAMATRIX", audio matrix device for EN54.
The Quicklink Remote Commentary Solution allows production teams to add synchronised real-time commentary from any location with an internet connection. The remote commentator/caster views the live event in a webpage and their commentary is added into the live program.
Highlights -
Remotely commentate on a live event from any location in the world with an internet connection.
Add value to your broadcast through content localisation.
Scale the system from commentating on one event in one additional language to multiple simultaneous commentaries in different languages on multiple events.
Use on premise dedicated hardware or use SaaS (Software as a service) model. SaaS allows multiple commentary channels to be started, scaling the system quickly without the requirement to deploy additional on-premise hardware.
For synced commentary, Quicklink’s Sync Sound algorithm makes sure the remote commentary mixed to the live event is always synchronised before output for broadcast.
Inbuilt Audio over IP using the Audinate Dante™, ensuring optimal communication between Dante™ enabled devices and the Remote Commentary solution. The solution also supports Livewire+™ conforming to the new AES67-2013 Interoperability Standard allowing connection between AES67 devices.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
