The MXE5 is the first member of the MXE matrix mix engine series. The 24 x 24 crosspoint performance audio matrix offers both routing and mixing functionalities, with 12 analog mic/line inputs and eight line outputs. At the same time, the MXE5 serves as a communications hub for all IP-based peripherals and provides comprehensive supervision of all system-wide commands.
With the latest V2.6 S-Series console fitted with a DMI-DANTE64@96 card providing 64 channels in and 64 channels out at both 48kHz and 96kHz, the package also includes three Dante enabled A168D STAGE I/O offering 48 mic inputs across multiple stages or auditoriums to deliver incredible sonic quality and flexibility.
With the latest V2.6 S-Series console fitted with a DMI-DANTE64@96 card providing 64 channels in and 64 channels out at both 48kHz and 96kHz, the package also includes three Dante enabled A168D STAGE I/O offering 48 mic inputs across multiple stages or auditoriums to deliver incredible sonic quality and flexibility.
The DiGiCo DMI-DANTE64@96 allows 64 channels in and 64 channels out at both 48kHz and 96kHz. It has a Primary and a Secondary port, both of which are Ethercon ports, and an RJ45 Control port. The card has two modes that can be changed in Dante Controller. In Switched Mode, the three ports are switched together. In redundant mode, the Control and Primary ports shall be switched together and work as a redundant pair with the Secondary port, each having separate IP addresses so that if the primary connection fails, the secondary connection will take over.
The A164D Wall LCD is a 16 input 4 output I/O Expander that uses the Dante network protocol to provide fixed, additional I/O anywhere on a network and is designed for wall or floor mounting. It comes with 16 Mic Preamps on XLR inputs with Phantom Power status LEDs and four XLR Line Outs with direct preamp control from the 4REA4 controller software. It can run at both 48K and 96k sample rates and it is AES67 compatible. Primary and secondary Dante ports come with locking EtherCON connectors and can run in both redundant and switched mode. All LCD labels are dimmable and can be customised using Dante controller software.
The A168D Stage is a portable 16 input 8 output I/O Expander, again using the Dante network protocol to provide additional I/O anywhere on a network. It comes with 16 mic preamps on XLR inputs with Phantom Power status LEDs and 8 XLR line outputs with direct preamp control from the 4REA4 controller software. It runs at 48k and 96k and is AES67 compatible. Primary and secondary ports again come with locking EtherCON connectors and can run in redundant or switched mode.
The Beatrice W1 is a single user interface for the Beatrice system, designed to mount flush on a wall or into a desk. it is a useful intercom position allowing two way communication to be possible at standing levels whilst mounted into walls, or at desk level if mounted on a Desk.
The Glensound Beatrice LH4 provides audio signal present and call indication via a bright LED ‘lighthouse’ tower, providing 360 degrees of visual signalling.
The Beatrice LH4 is ideal for providing cue/ on air indication to presenters and hosts using the standard Dante/AES67 network. The bright lighthouse LED tower can be set to illuminate on receipt of either an audio signal or a Beatrice 20kHz call signal from any of its 4 network audio inputs. Different colours/ brightness can be set by the user to be associated with each channel
To make it easy to send audible instructions to the users an internal speaker and balanced XLR audio output are also included that through the configuration menu can pass audio from the Dante/AES67 network if required.
The Beatrice LH4 is in a compact unit with a bright lighthouse tower for signalling. There is an onboard configuration screen and it is PoE powered.
The Glensound BEATRICE M1 is a robust interface for connecting wireless radios and walkie talkies to a Beatrice intercom. It has 4* audio inputs from the network and features crystal clear audio. It is designed for broadcast, theatre and professional audio pplications.
The M1 is part of the Beatrice intercom system that utilises the reliable and proven Dante® network audio transmission protocol to allow real time distribution of uncompressed audio across standard networks. As such the BEATRICE M1 is also fully compatible with other manufacturers’ equipment using the Dante® protocol.
Being able to interface a network audio intercom to low cost wireless radios and walkie talkies provides a real benefit to small theatres and studios. The low price point of walkie talkies combined with the features of Beatrice makes this a great solution for the technician and accountant alike.
The Beatrice B4+ is Glensound's first Broadway design unit, with 4 x FW & 4 x IFBs to the Dante/AES67 Network. The B4+ can interfacewith 4 completely separate network locations.
The deisgn of the B4+ is ultra compact to make the unit as unobtrusive to the operator as possible.
The microphone input is on a 3 pin XLR and features gain adjust and 48V phantom power. The XLR connector can be specified with 4 or 5 pins for headset connections.
Four separate talk buttons route the microphone input to either of the 4 network outputs. The button operation can be configured as momentary, latching or intelligent. A double tap on any of the talk buttons will produce a 'call' signal alert that will be received by another Beatrice unit. An LED indicates an incoming call alert, which will also produce an audio indication on the headphones.
Each input has a separate level control adjust and a signal present indicator.
Using a modern, full-featured Bluetooth 5.0 chipset allows the xIO Bluetooth to offer extended range, a stable connection, and world-class audio quality. Available in US/EU form factors, the xIO Bluetooth has a clean, sleek design compatible with standard single gang US wall boxes with Decora faceplates, as well as EU/UK standard wall boxes.
IP/PoE simplify installation by allowing a single cable from the xIO Bluetooth to a PoE enabled network switch. The xIO Bluetooth may be configured for media-only, phone bridge, or both, and can be controlled using Symetrix remotes, SymVue panels, or third-party control systems.
The xIO Bluetooth is a fully integrated member of the Symetrix xIO family of Dante endpoints allowing full control and configuration of the device, including Dante routing, from within Symetrix Composer™ software. The xIO Bluetooth is fully configurable including the Bluetooth friendly device name, Dante channel names, connect/reconnect functionality, and security.
• 16 x 140 Watt @ 8 Ohm / 270 Watt @ 4 Ohm
• LAN control protocol
• 2RU high
• 32 x 140 Watt @ 8 Ohm / 280 Watt @ 4 Ohm
• LAN control protocol
• only 2RU high
• dynamic DanteTM routing
• DanteTM and network parameter monitoring and reporting
• easy configuration via web interface and integration via nexgentec super modules
• control API
• configurable signal processing
• rich palette of processing and logic objects, nexgentec super modules
• DanteTM audio, 64 x 64 audio
• modular design, four card slots
• configurable signal processing
• rich palette of processing and logic objects, nexgentec super modules
• DanteTM audio, 64 x 64 audio, 16 x 16 analog input / output
• configurable signal processing
• rich palette of processing and logic objects, nexgentec super modules
• DanteTM audio, 64 x 64 audio, 12 x 8 analog input / output
• slot for option card
• configurable signal processing
• rich palette of processing and logic objects, nexgentec super modules
• DanteTM audio, 64 x 64 audio, 8 x 8 analog input / output
• configurable signal processing
• rich palette of processing and logic objects, nexgentec super modules
• DanteTM audio, 64 x 64 audio, 8 x 8 analog input / output
• configurable signal processing
• rich palette of processing and logic objects, nexgentec super modules
• DanteTM audio, 64 x 64 audio, 4 x 4 analog input / output
• slot for option card
• configurable signal processing
• rich palette of processing and logic objects, nexgentec super modules
• DanteTM audio, 64 x 64 audio, 4 x 4 analog input / output
• PoE+ powered
• configurable signal processing
• rich palette of processing and logic objects, nexgentec super modules
• DanteTM audio, 64 x 64 audio
• PoE+ powered
Inputs / Outputs
8x Mic/Line inputs, electronally balanced on XLR-3F, with phase reversal, 48V phantom and LF cut with level control on the front panel
4x AES3 transformer balanced outputs on multi-pin connector
Optional audio over IP on RJ45 connector, for AVB and Dante
Performance
135 dB (A-weighted) overall dynamic range
90kHz overall frequency response @192 kHz
40 bits processing
24bits 48/96/192 kHz
User Interface
Using front panel push-buttons
WiFi dynamic web interface
through SX-R4+ user interface
Power
External DC 9..18V on Hirose 4pins
Class 1 IEEE 802.3af PoE (with Dante option board)
Mechanical
Machined aluminum housing
Overall dimension: 200 x 50 x 144.5 mm (7.87” x 1.96” x 5.7”)
Weight: 850g / 1.9lbs
The DMG20 series is divided into 4 versions to meet different market needs. Please pay attention when purchasing.
| DMG20 trial version | Only 2 scenes can be stored |
| DMG20 Popular Version | 100 scene storage |
| DMG20 function version | Including all-pass filter + dynamic equalization DEQ advanced algorithm |
| DMG20 synchronous version | Includes dual-machine real-time data synchronization (hot backup) |
Master Class, Talking Circuit
Out of 16 analog inputs, 14 digital gain amplifier channels, smooth 1dB step gain adjustment, signal through high-performance low-delay 24-bit analog-to-digital converter, minimal distortion and ultra-low noise floor, multi-function parameters Adjustable; digital gain brings good consistency, which can effectively prevent misuse; these are unmatched by analog mixers.
Talking floor noise: 30dBu Talking gain -86.8dBu without credit (AP test AES17-20Khz)
Talking noise floor: 40dBu Talking gain -80dBu without credit (AP test AES17-20Khz)
DANTE 8i8o is an 8-in 8-out cobranet network audio interface machine. It follows the DANTE network audio standard to meet high-demand professional audio signal transmission. Supports 8-channel microphone/line analog audio input and 8-channel balanced analog signal output. Each input channel supports independent 48V phantom power supply and independent gain control. The open TCP/IP and RS232 control protocols allow third-party software to control the analog gain and 48V switch.
A scalable new interface that combines RADAR analog cards and Dante® connectivity
The Holoplot Eta core is the brain of our wave field synthesis technology, processing all the vital data and generating signals to make the sound system come to life. The Holoplot Eta’s processing power can support up to 64 modules, accommodating an incredible range of practices from small to large setups.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
Activation instructions:
