• Cart
  • AUDINATE > share

Cart

Dante-enabled Product Catalog

Amplifiers
Amplifiers
Data Interface Cards
Dante Interface Cards
Encoders & Decoders
Encoders & Decoders
Speakers
Speakers
Mixers
Mixers
DSPs
DSPs
I/O Interfaces
I/O Interfaces
Microphones
Microphones
Cameras
Cameras
worxaudio-waveseries-218S_600px|worxaudio-waveseries-218S_600px
  • WorxAudio

WorxAudio – WaveSeries 218S

The 218S is a high performance bass reflex loudspeaker, designed to extend the low frequency response of WaveSeries loudspeaker systems to 31Hz. It has dual long excursion eighteen-inch cone driver in a tuned enclosure, providing extended response with extremely low distortion. The 218S is a high performance bass reflex loudspeaker, designed to extend the low frequency response of WaveSeries loudspeaker systems to 31Hz. It has dual long excursion eighteen-inch cone driver in a tuned enclosure, providing extended response with extremely low distortion. The 218S is ideally suited for music reproduction and operates as a low frequency section in conjunction with other mid – high enclosures, or as a sub bass section for any loudspeaker system requiring enhanced low frequency performance. The sturdy multi-ply plywood enclosure, with a catalyzed polyurethane finish, is designed to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The 218S can be purchased in two versions. The portable configuration has large recessed handles, rigid casters, and a mid – high pole receptacle, while the installation version can be fitted with a variety of flyware. Both are available in white, black or unfinished exterior. The 218S loudspeaker is designed to satisfy a wide variety of low frequency audio applications and offers extraordinary performance and value.
  • Speakers
See the product
worxaudio-waveseries-2AX_600px
  • WorxAudio

WorxAudio – WaveSeries 2AX

The WaveSeries 2AX is designed to satisfy the need for a compact high SPL fill monitor system. All components were selected solely for their performance. The WaveSeries 2AX is designed to satisfy the need for a compact high SPL fill monitor system. All components were selected solely for their performance. The WaveSeries 2AX utilizes a single 12″ low frequency driver in a tuned enclosure, which provides maximum output with minimal distortion and unusually smooth low frequency response. A 3″ compression driver with an aluminum diaphragm coupled to a stabilized waveguide delivers clear but penetrating high frequencies over a controlled and easily predictable coverage area. The 2AX can be purchased in white, black or unfinished exterior. The portable configuration has two large recessed handles. The 2AX excels in a myriad of diverse applications requiring a compact enclosure with a low profile, and offers extraordinary performance and value.
  • Speakers
See the product
worxaudio-waveseries-2MX_600px
  • WorxAudio

WorxAudio – WaveSeries 2MX

The 2MX is a two-way, high efficiency, passive/active loudspeaker. It is designed as a compact high performance monitor system for the reproduction of speech and music program material. The 2MX is a two-way, high efficiency, passive/active loudspeaker. It is designed as a compact high performance monitor system for the reproduction of speech and music program material. The 2MX has a 1.4-inch exit compression driver coupled to a 75 X 50 degree waveguide horn reproducing high frequencies, and a high-powered twelve-inch cone transducer in a tuned enclosure for the low frequencies. A high quality passive network operates very efficiently, or can be ordered without the network for bi-amp applications. The sturdy multi-ply plywood enclosure, with a catalyzed polyurethane finish, is designed to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The 2MX can be purchased in white, black or unfinished exterior. The monitor configuration has two large recessed handles. The 2MX excels in a myriad of diverse applications requiring a compact enclosure with a low profile, and offers extraordinary performance and value.
  • Speakers
See the product
worxaudio-waveseries-18S_600px|worxaudio-waveseries-18S_600px
  • WorxAudio

WorxAudio – WaveSeries 18S

The 18S is a high performance bass reflex loudspeaker, designed to extend the low frequency response of Wave Series loudspeaker systems to 31Hz. It has a long excursion eighteen-inch cone driver in a tuned enclosure, providing extended response with extremely low distortion. The 18S is a high performance bass reflex loudspeaker, designed to extend the low frequency response of Wave Series loudspeaker systems to 31Hz. It has a long excursion eighteen-inch cone driver in a tuned enclosure, providing extended response with extremely low distortion. The18S is ideally suited for music reproduction and operates as a low frequency section in conjunction with other Wave Series enclosures, or as a sub bass section for any loudspeaker system requiring enhanced super low frequency (SLF) performance. The sturdy multi-ply plywood enclosure, with a catalyzed polyurethane finish, is designed to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The 18S can be purchased in two versions. The portable configuration has large recessed handles and a mid/high pole receptacle, while the installation version has a standard twelve point flyware system. Both are available in white, dark gray or unfinished exterior. The 18S loudspeaker is designed to satisfy a wide variety of low frequency audio applications and offers extraordinary performance and value.
  • Speakers
See the product
worxaudio-waveseries-12A_600px|worxaudio-waveseries-12A_600px
  • WorxAudio

WorxAudio – WaveSeries 12A

The 12A is a two-way, high efficiency, passive loudspeaker. It is designed as a compact high performance system for the reproduction of speech and music program material. The 12A is a two-way, high efficiency, passive loudspeaker. It is designed as a compact high performance system for the reproduction of speech and music program material. The 12A has a one-inch exit compression driver coupled to a 75 X 75 degree wooden waveguide horn reproducing high frequencies, and a twelve-inch cone transducer in a tuned enclosure for the low frequencies. A high quality passive network operates very efficiently, also providing EQ points for a flat frequency response. The sturdy multi-ply plywood enclosure, with a catalyzed polyurethane finish, is designed to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The 12A can be purchased in two versions. The portable configuration has large recessed handles and a stand mount, while the installation version has a standard twelve point flyware system. Both are available in white, black or unfinished exterior. The 12A excels in a myriad of diverse applications requiring a compact trapezoid enclosure, and offers extraordinary performance and value.
  • Speakers
See the product
worxaudio-waveseries-12M_600px|worxaudio-waveseries-12M_600px
  • WorxAudio

WorxAudio – WaveSeries 12M

The 12M is a two-way, high efficiency, passive loudspeaker. It is designed as a compact high performance monitor system for the reproduction of speech and music program material. The 12M is a two-way, high efficiency, passive loudspeaker. It is designed as a compact high performance monitor system for the reproduction of speech and music program material. The 12M has a one-inch exit compression driver coupled to a 75 X 75 degree wooden waveguide horn reproducing high frequencies, and a twelve-inch cone transducer in a tuned enclosure for the low frequencies. A high quality passive network operates very efficiently, also providing EQ points for a flat frequency response. The sturdy multi-ply plywood enclosure, with a catalyzed polyurethane finish, is designed to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The 12M can be purchased in white, dark gray or unfinished exterior. The monitor configuration has two large recessed handles. The 12M excels in a myriad of diverse applications requiring a compact enclosure with a low profile, and offers extraordinary performance and value.
  • Speakers
See the product
worxaudio-waveseries-15A_600px|worxaudio-waveseries-15A_600px
  • WorxAudio

WorxAudio – WaveSeries 15A

The 15A is a two-way, high efficiency, passive loudspeaker. It is designed as a compact high performance system for the reproduction of speech and music program material. The 15A is a two-way, high efficiency, passive loudspeaker. It is designed as a compact high performance system for the reproduction of speech and music program material. The 15A has a one-inch exit compression driver coupled to a 75 X 75 degree wooden waveguide horn reproducing high frequencies, and a fifteen-inch cone transducer in a tuned enclosure for the low frequencies. A high quality passive network operates very efficiently, also providing EQ points for a flat frequency response. The sturdy multi-ply plywood enclosure, with a catalyzed polyurethane finish, is designed to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The 15A can be purchased in two versions. The portable configuration has large recessed handles and a stand mount, while the installation version has a standard twelve point flyware system. Both are available in white, black or unfinished exterior. The 15A excels in a myriad of diverse applications requiring a compact trapezoid enclosure, and offers extraordinary performance and value.
  • Speakers
See the product
worxaudio-waveseries-15S_600px
  • WorxAudio

WorxAudio – WaveSeries 15S

The 15S is a high performance bass reflex loudspeaker, designed to extend the low frequency response of Wave Series loudspeaker systems to 31Hz. It has a long excursion 15-inch cone driver in a tuned enclosure, providing extended response with extremely low distortion. The 15S is a high performance bass reflex loudspeaker, designed to extend the low frequency response of Wave Series loudspeaker systems to 31Hz. It has a long excursion 15-inch cone driver in a tuned enclosure, providing extended response with extremely low distortion. The 15S is ideally suited for music reproduction and operates as a low frequency section in conjunction with other Wave Series enclosures, or as a sub bass section for any loudspeaker system requiring enhanced low frequency performance. The sturdy multi-ply plywood enclosure, with a catalyzed polyurethane finish, is designed to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The 15S can be purchased in two versions. The portable configuration has large recessed handles and a stand mount, while the installation version has a standard twelve point flyware system. Both are available in white, dark black or unfinished exterior. The 15S loudspeaker is designed to satisfy a wide variety of low frequency audio applications and offers extraordinary performance and value.
  • Speakers
See the product
worxaudio-waveseries-8A_600px|worxaudio-waveseries-8A_600px
  • WorxAudio

WorxAudio – WaveSeries 8A

The 8A is a two-way, high efficiency, passive loudspeaker. It is designed as a compact high performance system for the reproduction of speech and music program material. The 8A is a two-way, high efficiency, passive loudspeaker. It is designed as a compact high performance system for the reproduction of speech and music program material. The 8A has a one-inch exit compression driver coupled to a 75 X 75 degree wooden waveguide horn reproducing high frequencies, and an 8-inch cone transducer in a tuned enclosure for the low frequencies. A high quality passive network operates very efficiently, also providing EQ points for a flat frequency response. The sturdy multi-ply plywood enclosure, with a multi layered catalyzed Polyurea finish, is designed to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The 8A can be purchased in two versions. The portable (8A) configuration has large recessed handles and a stand mount, while the (8Ai) installation version has a standard twelve point flyware system. Both are available in white, black or unfinished exterior.
  • Speakers
See the product
worxaudio-waveseries-8M_600px
  • WorxAudio

WorxAudio – WaveSeries 8M

The 8M is a two-way, high efficiency, passive loudspeaker. It is designed as a compact high performance system for the reproduction of speech and music program material. The 8M is a two-way, high efficiency, passive loudspeaker. It is designed as a compact high performance system for the reproduction of speech and music program material. The 8M has a one-inch exit compression driver coupled to a 75 X 75 degree wooden waveguide horn reproducing smooth high frequencies, and an 8” cone transducer in a tuned enclosure for the low frequencies. The high quality passive network operates very efficiently, also providing EQ points for a flat frequency response. The sturdy multi-ply plywood enclosure, with a multi-layered catalyzed Polyurea finish, is designed to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The 8M is a portable configuration and has a recessed handle with a stand mount. The 8M comes in a black finish. The 8M excels in a myriad of diverse applications requiring a compact multi-angle enclosure, and offers extraordinary performance and value.
  • Speakers
See the product
pan-acoustics-pb16_0|pan-acoustics-pb16_0
  • Pan Acoustics

Pan Acoustics – PB 16

The Pan Beam PB 16 is a slim line speaker in an appealing design. The Pan Beam PB 16 can generate four independent beams, to get an optimal sound coverage on the listing area. The Pan Beam PB 16 is a slim line speaker in an appealing design. The Pan Beam PB 16 can generate four independent beams, to get an optimal sound coverage on the listing area. It is possible to modify the beam through various optimizers (max SPL, SPL + min side lobes, min side lobes). Operated via a user friendly Windows Software, the connection to the computer is made through a RS 485 network. Over the digital signal processing the vertical and the inclination angle, the volume, sound and delay can be entered and controlled. The Pan Beam PB 16 is equipped with 16 specially-designed 3.5“ chassis, DSP modules and 16 digital amplifiers offering maxi- mum performance of 80 watts per channel. A single Pan Beam PB 16 can cover a listening area of 35 meters, with constant speech intelligibility and sound pressure.
  • Speakers
See the product
pan-acoustics-pb-s-208_0|pan-acoustics-pb-s-208_0
  • Pan Acoustics

Pan Acoustics – PB S-208

The PB S-208 is an active subwoofer incl. DSP and network functionality. The PB S-208 is the low extension of the Pan Beam family. It is characterized by an unobtrusive design and a genuine and deep bass response. The PB S-208 can be operated in various cardioid applications. The PB S-208 is an active subwoofer incl. DSP and network functionality. The PB S-208 is the low extension of the Pan Beam family. It is characterized by an unobtrusive design and a genuine and deep bass response. The PB S-208 can be operated in various cardioid applications. Operated via a user friendly Windows software, the connec- tion to the computer occurs over an RS 485 network. With the help of digital signal processing, the sound and the delay time can be entered and controlled. The PB S-208 is equipped with two 8" HQ-Drivers and a digi- tal amplifier. The total amplifier power is 600 Watts (800 Watt peak) with a power consumption of 20 VA (normal) or 800VA (max).
  • Speakers
See the product
stewart-audio-dsp100-1-cv|stewart-audio-dsp100-1-cv
  • Stewart Audio

Stewart Audio – DSP100-1-CV

The DSP100 is an affordable amplifier with fully integrated DSP designed optimize the speakers and acoustical limitations of a zone.  The DSP100 is an affordable amplifier with fully integrated DSP designed optimize the speakers and acoustical limitations of a zone. The DSP100 comes in two versions, a 1x100W 70/100V and a 2x100W 70/100V and two factory installed input options that include analog and Dante™. The robust, full function DSP includes 3 gain stages, filtering, compressors, limiters, parametric EQ and more. A USB port makes programing simple, fast and repeatable for large installations. The optional factory installed Dante™ card allows for up to 2 channels of networked audio to be routed to the amplifier and through the DSP. You won't find a more cost effective way to bring outstanding sound quality to zone on the market today.
  • Amplifiers
  • Dante Ch: 2 In
  • AES67 Enabled
See the product
stewart-audio-dsp100-2-cv
  • Stewart Audio

Stewart Audio – DSP100-2-CV

The DSP100 is an affordable amplifier with fully integrated DSP designed optimize the speakers and acoustical limitations of a zone. The DSP100 is an affordable amplifier with fully integrated DSP designed optimize the speakers and acoustical limitations of a zone. The DSP100 comes in two versions, a 1x100W 70/100V and a 2x100W 70/100V and two factory installed input options that include analog and Dante™. The robust, full function DSP includes 3 gain stages, filtering, compressors, limiters, parametric EQ and more. A USB port makes programing simple, fast and repeatable for large installations. The optional factory installed Dante™ card allows for up to 2 channels of networked audio to be routed to the amplifier and through the DSP. You won't find a more cost effective way to bring outstanding sound quality to zone on the market today.
  • Amplifiers
  • Dante Ch: 2 In
  • AES67 Enabled
See the product
stewart-audio-dsp100-2-lz|stewart-audio-dsp100-2-lz
  • Stewart Audio

Stewart Audio – DSP100-2-LZ

The DSP100 is an affordable amplifier with fully integrated DSP designed optimize the speakers and acoustical limitations of a zone.  The DSP100-2-LZ comes in a 2x100W/50W @ 4/8 Ohm version with two factory installed input options that include analog and Dante™. The robust, full function DSP includes 3 gain stages, filtering, compressors, limiters, parametric EQ and more. A USB port makes programing simple, fast and repeatable for large installations. The optional factory installed Dante™ card allows for up to 2 channels of networked audio to be routed to the amplifier and through the DSP. You won't find a more cost effective way to bring outstanding sound quality to zone on the market today.
  • Amplifiers
  • Dante Ch: 2 In
See the product
stewart-audio-flx160-2-lz|stewart-audio-flx160-2-lz
  • Stewart Audio

Stewart Audio – FLX160-2-LZ

The FLX (pronounced FLEX) Platform is the most versatile 1/2 rack amplifier Stewart has ever produced. The FLX (pronounced FLEX) Platform is the most versatile 1/2 rack amplifier Stewart has ever produced. This compact package contains over 300 watts of power output in various channel configurations and impedances. At the heart of the platform is a robust, internal full function DSP that is designed to solve a multitude of your audio problems in just one box. The channel count varies from 1-4 channels and the DSP allows further configuration via routing, EQ, Filters, limiters and much more. A USB port makes programming simple, fast and repeatable for large installations. The RVC and RS232 control allow volume control from a wide range of devices. In addition, the FLX platform has an optional factory installed Dante™ card with 2 channels of networked audio. You won't find a more flexible combination of power output and processing in a comparable package on the market today.
  • Amplifiers
See the product
roland-v1200_1200px
  • Roland

Roland – V-1200HD

The Roland V-1200HD Multi-Format Video Switcher is a 2 M/E switcher featuring a new 4:2:2 / 4:4:4 Hybrid Engine that combines the features of a production switcher with the power of a presentation switcher.  Hybrid engine 2 M/E switcher and processor for broadcast and live events. The Roland V-1200HD Multi-Format Video Switcher is a 2 M/E switcher featuring a new 4:2:2 / 4:4:4 Hybrid Engine that combines the features of a production switcher with the power of a presentation switcher. Multiple M/E configurations can be selected from 1 M/E, 1.5 M/E and 2 M/E to meet the needs of your production. Inputs include 10 3G SDI and 4 HDMI with 6 3G-SDI Outputs and 2 HDMI outputs. Scalers on HDMI inputs 3 & 4 and HDMI outputs support SD, HD and VESA resolutions. Switch using the V-1200HDR Control Surface or free downloadable Remote Control Software (RCS). The video inputs and the powerful built-in 16-channel audio mixer can be expanded with XI-Series video and audio expansion cards. An intuitive user interface with assignable cross-points and on screen names ensures maximum flexibility for and live production or broadcast.
  • DSPs (Digital Signal Processors)
See the product
mandozzi-idea-central-audio-matrix-frame|mandozzi-idea-central-audio-matrix-frame
  • Mandozzi Elettronica

Mandozzi Elettronica – IDEA Central Audio Matrices

The audio matrices IDEA developed and manufactured by Mandozzi Elettronica SA are ideal for all customers who are looking for systems that perform more than just simple X/Y connections, but intelligent switching functions and audio signal processing. They are designed to be used as main central matrix of a radio house, or to serve a large number of mixers. IDEA is a fully digital audio routing switcher that offers a great number of various audio input and output interface module types. Input signals with any format (analogue, digital, 2 Mbps, IP, MADI, ATM, Gigabit) are converted to the internal standard of the routing switcher (48 kHz, 32 bit, according to AES/EBU), and the output signals can be presented to the customer in any format he required.  
  • Audio Routing Matrix Switches
See the product
mandozzi-dante4-card_600px_0|mandozzi-dante4-card_600px_0
  • Mandozzi Elettronica

Mandozzi Elettronica – Dante4 Card

The new Dante Module provides up to 4 network ports with 64 mono channels each. Therefore one module can handle up to 256 audio signals. The module offers redundant network ports for maximum reliability. In the latest software version Dante TM also supports AES67 connections in order to guarantee the compatibility with a wider range of other 3rd party products. The new board can be implemented in all existing IDEA systems easily. It is compatible with multichannel modules like MADI or GIGM concentrator interfaces.
  • Up to 256 audio signals
  • Redundant CAT5 connections
  • Totally integrated into the IDEA intelligent matrices system
  • Dante Interface Cards
See the product
ashly-nXe-8004_600px
  • Ashly Audio

Ashly – nXe8004d

The nXe8004bd is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
  • Amplifiers
  • AES67 Enabled
See the product
ashly-nXp-4002_600px|ashly-nXp-4002_600px
  • Ashly Audio

Ashly – nXp4002d

The nXp4002d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
  • Amplifiers
  • Dante Ch: 4x4
  • 48kHz-96kHz
See the product
ashly-nXp-4004_600px
  • Ashly Audio

Ashly – nXp4004d

The nXp4004d is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
  • Amplifiers
  • Dante Ch: 4x4
  • 48kHz-96kHz
See the product
ashly-nXp-8002_600px
  • Ashly Audio

Ashly – nXp8002d

The nXp8002d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
  • Amplifiers
  • Dante Ch: 16x16
  • 24-bit
See the product
ashly-nXp-8004_600px|ashly-nXp-8004_600px
  • Ashly Audio

Ashly – nXp8004d

The nXp8004d is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
  • Amplifiers
  • Dante Ch: 4 In
  • 24-bit
See the product
ashly-nXe-8002_600px|ashly-nXe-8002_600px
  • Ashly Audio

Ashly – nXe8002bd

The nXe8002bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
  • Amplifiers
See the product
cab-4n-dante_600px
  • Peavey MediaMatrix

Peavey MediaMatrix – CAB 4n-Dante

The CAB™ 4n continues in the tradition of high-end audio networking set forth by the time-tested CAB Series. In fact, the CAB 4n break-out box was designed specifically for NION®-based systems. The CAB™ 4n continues in the tradition of high-end audio networking set forth by the time-tested CAB Series. In fact, the CAB 4n break-out box was designed specifically for NION®-based systems. The CAB 4n features MediaMatrix®'s Scalable I/O Architecture, with support for the popular line of MediaMatrix I/O modules (up to four modules configurable for 16x0, 0x16, 12x4, 4x12 or 8x8 operation, IxO). All inputs can be configured in groups of four channels for microphone or line level in any of the available configurations. The CAB 4n features a versatile, performance-oriented GPIO port, which provides configurable contacts for analog, digital and dry contact use. All of the GPIO ports are configurable from the NWare™ software and include an easy DIN rail mounting system for efficient rack wiring and service.
  • Four 16-position front panel rotary switches for unit ID
  • Front panel level meter for each channel
  • 24-bit quantization 64x oversampling
  • 48kHz sample-rate
  • 8 Configurable GPIO pins
  • 4 "Form C" relays with NO and NC connections, contacts rated for 1A
  • Fault relay for hardware indication of unit status, NO and NC connections, contacts rated for 1A
  • Universal power supply (100-240V 50-60Hz)
  • Scalable I/O Architecture
  • Configurable for 16x0, 0x16, 12x4, 4x12 or 8x8 operation
  • Inputs configurable in groups of four channels for microphone or line-level input and line-level output
  • GPIO port
  • GPIO-25 DIN rail breakout panel for external control terminations
  • Fan cooled 2U package with NION cosmetics
  • Front panel audio metering
  • Front panel network status and fault indicators
  • I/O Interfaces
See the product
MMA-10G-HUB_600px
  • Evertz

Evertz – MMA-10G-HUB

The MMA-10G-HUB is the latest product addition to Evertz’ MMA-10G Network based AV distribution series. The MMA10G-HUB is an in room audio and video switcher that leverages Evertz’ SDVN Software Defined Video Networking technology. The MMA-10G-HUB is the latest product addition to Evertz’ MMA-10G Network based AV distribution series.  The MMA10G-HUB is an in room audio and video switcher that leverages Evertz’ SDVN Software Defined Video Networking technology. Evertz’ MMA10G-HUB is a powerful HDMI router with 10GE extension ports enabling local routing to converge within the larger facility.  The HUB can easily connect a single room to a facility, thereby unleashing a world of possibilities for collaboration, resource sharing and connectivity. By offering multiple HDMI, SDI and audio inputs and outputs with Dante option in a compact 2RU form factor, the HUB can solve all in room switching requirements.
  • AV Encoders & Decoders
See the product
1 … 110 111 112 113 114 … 127

Activating Third Party Apps

Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.

Activation instructions:

  1. Download and install the third-party application
  2. Download and install Dante Controller v4.5 or higher from https://www.getdante.com/products/software-essentials/dante-controller/
  3. Launch the application and leave it running
  4. Launch Dante Controller
  5. From the Dante Controller toolbar, launch the Dante Ready Activator tool
  6. The Dante Ready Activator tool will display purchase options for the third-party application
  7. Choose your desired purchase options
  8. Enter Audinate login information in dialog box that appears if not already authenticated.
  9. Enter payment information and complete transaction
  10. Your third-party application is now ready to use with your purchased Dante channels