AtlasIED – IED5404CS


More details

Similar Products

audix-m3|audix-m3
  • Audix

Audix – M3

The M3 is an innovative, tri-element hanging ceiling microphone designed for applications where aesthetics, sound quality, and ease of installation are critical. The M3 is an ideal audio capture solution for video conferencing, distance learning, courtroom activities, and surgical procedures. It can also be used for ambient room miking and surveillance. The M3 ceiling microphone incorporates three phase coherent hypercardioid capsules with tailored frequency response optimized for speech intelligibility. This is accomplished by minimizing frequencies caused by noise, vibration, paper shuffling, keyboard strokes, fans, and heating /air conditioning. Low noise preamp circuitry is employed for highest possible signal to noise and studio quality sound. A high-quality silicone jacketed microphone cable ensures a balanced, shielded signal and a very clean look. Electronics above the ceiling are housed within a plenum rated junction box and cable connections are made via an RJ45 connector embedded within a proprietary brass housing for an airtight seal. The M3 installed ceiling microphone connects to the input of a mixer or dsp console via a breakout cable (provided). The breakout cable consists of a female RJ45 connector that terminates in either three terminal block or XLR connectors. A variety of optional shielded CAT7 cable lengths (from plenum rated junction box to break out cable) are available. Installing the M3 requires drilling just one 5/8-inch hole in the ceiling, with no additional tools needed. The M3 mounting hardware easily adjusts the cable hanging height up to four feet from the ceiling surface without removing ceiling tiles. A wire safety cable provides additional seismic restraint. Features
  • 100% RF shielding and immunity
  • Gold diaphragm condenser capsules with studio quality sound
  • Low impedance design allows for extremely long cable runs (if required) without cross talk or interference
  • Frequency and pattern tailored for voice clarity and rejection of extraneous noise
  • Evenly dispersed sound with undetectable phase
  • High-quality silicone jacketed microphone cable with adjustable length and position
  • Plenum rated junction box with RJ45 connector
  • All visible components of the microphone and cable are same color: charcoal or white
  • TAA compliant
  • Very high output, low self-noise
  • Easy to install
    Microphones
DMS-1011C/D
  • ZenWin

DMS-1011C/D

Features:
  • Adopting Zenwin's original digital conference technology, in compliance with the IEC60914 international standard
  • Exquisite and elegant countertop structure, ergonomic and modern, mainly used in high-end conferences and other professional occasions
  • Using zinc/aluminum alloy material, anodizing process, CNC precision machining high gloss edge
  • Easy to adjust, durable, small, and can be repeatedly swung. The goose neck can be bent to quickly and freely fix the microphone head in the appropriate position
  • The pure speech conference unit is equipped with a 0.96-inch color screen displaying conference mode, conference unit ID number, and chairman/representative function;
  • Independently adjust the microphone gain, which can be adjusted on the microphone or computer management software to make speakers speak more smoothly at different volumes;
  • Double layered windproof sponge cover can reduce the occurrence of indecent jet and other wind sounds during speech
  • Built in high-performance DSP audio chip, optimized audio signal, restored vocals, and excellent sound quality
  • Two color LED indicator light, speaking in green; Flashing red when applying to speak and setting ID;
  • The unit comes with a 1.5-meter Category 6 shielded Ethernet cable;
  • The ID number of the microphone unit can be assigned to the conference unit ID through the ID switch of the conference host;
    Microphones
image009
  • BARE

BARE – DCS-10C/D

Features: Adopt all-digital conference technology, in line with IEC60914 international standard; The exquisite and minimal structure design highlights the modern atmosphere and conforms to ergonomics; Brand new dual microphone design, longer pickup distance and wider range; Special electret capacitive single microphone core design, clear and bright sound quality, high sensitivity; Original microphone directivity variable technology, users can adjust the microphone directivity according to different environments, locations, meeting methods, and the needs of the speaker, so as to achieve an optimal sound pickup effect, and support 5 modes: omnidirectional, heart -Type directivity, super-cardioid directivity, sharp-heart-type directivity, figure 8 directivity, etc.; Full digital audio technology, built-in high-performance CPU, faster processing speed, better sound quality; Ring hand-in-hand connection technology, the failure or replacement of a microphone will not affect the work of other extensions of the system, and a connection failure between the microphones will not affect the system work, thus making the system more reliable; Support line "hot swap", microphone access system can be added at any time The chairman unit has the priority function of full control of the conference order, and the connection position is not restricted. The chairman unit can short press the function button in the application mode to allow the delegate unit to turn on the microphone. In the conference mode, the chairman unit can short press the function button to turn off all the microphones of the delegate units. If there is a delegate unit waiting to be turned on, it will be turned on immediately. With the camera tracking host, after using the computer preset, the camera can be automatically tracked; There are 4 speaking modes: normal mode, first-in first-out mode, free mode, application mode; Two-color LED indicator, red when speaking; With the sign-in function, the host computer initiates and checks the sign-in situation; Anti-interference from mobile phone microphone core, stable connection, durable and reliable; Independently adjust the microphone gain, which can be adjusted on the microphone or computer management software, so that speakers with different volumes can speak more smoothly; 1 Ø 3.5mm stereo headphone jack can be connected to headphones; The conference unit has a unique serial number, and the conference system can manually assign an ID to the conference unit.
    Microphones