Dante-enabled Product Catalog

Dante PoE吸顶音箱

Dante PoE吸顶音箱

Engineered for applications with limited plenum space. Incorporates a SoundTube-specific shallow backcan with an installed depth of 3.5 inches. One 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 65 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 84.5 dB sensitivity, 16 ohm impedance. Incorporates a painted steel grille for lasting durability. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480 and 2043 listed.

Offering an economical option for expansion of audio coverage in a digital speaker system, this Dante®-enabled coaxial in-ceiling speaker has output terminals for connection and power of up to three additional standard CM62-BGM speakers. The speaker incorporates one 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 60 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. When combined with standard speakers, the four-speaker cluster can be split and configured to handle two separate channels of audio. Mounting hardware is included and features SoundTube®'s SpeedWing™ constant-tension fixed-wing mounting system, which accommodates material thicknesses ranging from 0.035 in (0.9 mm) to 2.38 in (60.4mm). UL 60065 and 2043 listed. Color-coded (green) tile bridge, UL listed conduit clamp and paint shield are included.

One 8.0 inch (203 mm) polypropylene woofer with butyl rubber surround and one 1.0 inch (25 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 55 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 86.0 dB sensitivity, 16 ohm impedance. Incorporates a painted steel magnetic seamless grille for lasting durability and refined aesthetics. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480 and 2043 listed.

One 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 65 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 84.5 dB sensitivity, 16 ohm impedance. Incorporates a painted steel grille for lasting durability. Adaptable to material thicknesses ranging from 0.035 in. (0.9 mm) to 1.6 in. (40.6 mm). UL 1480 and 2043 listed.

One 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 64 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 85.0 dB sensitivity, 16 ohm impedance. Incorporates a painted steel magnetic seamless grille for lasting durability and refined aesthetics. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480, UL 2043 and EN54-24 listed.

The Smart pi EDC is a partnership with EDC Acoustics to integrate EDC’s Plane Array™ technology which allows systems the ability to create 3D wave fronts. Each speaker is capable of vertical and/or horizontal steering as well as customizable wave shaping, allowing re-configurable pattern control to suit any venue or area further increasing speech intelligibility in difficult acoustic environments.

The speaker is Power supply via POE/POE+ (Power over Ethernet) or DC19V power supply, available at option. The speaker includes a Class-D audio power amplifier which provides effective use of power.

The audio network system is also compatible with AES67 which makes this speaker system to be flexible with other audio network systems.

The system comes with 8” coaxial 60W loudspeaker driver, MNS-8A11CS-1P that has excellent dispersion, wide bandwidth and smooth frequency response which makes this the top choice for today’s overhead commercial applications.

This assembly can be used in wide range of projects for paging and background music applications.

MNS-8A11CS-1P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE/POE+ used, It can used the external 19VDC power supply.

Compact coaxial wide-aperture speaker, Dante™ processed, PoE+ • Last generation 60W class D amplifier board with integrated DSP • Wide and homogeneous directivity 85° x 85° • Wooden cabinet • Euroblock connector for use with external amplification • Cut-out cabinet for wedge applications • Well for coupling with SPIK SUB ( with SMP tube) • Remote volume control, bass, treble via FRENETIK Adjust software • Board temperature monitoring • No logo on front panel

Technical data:

Type: Amplified 2-way coaxial loudspeaker,Dante™ PoE+
Power (passive mode): 100 W (8 ohms)
Amplification: 60 W (classe D)
Dante™ Receiver: 1 (16 / 24 / 32 bit - 44.1 à 96 kHz)
Transducers: 1 x 6" woofer / 1 x 3" tweeter
Peak SPL capacity (1 m): 114 dB
Bandwidth (-10 dB): 75 Hz – 18 kHz
Directivity (H x V): 85° x 85°
Input connectors: 1 x RJ45 (Dante™ active mode) + 1 Euroblock (passive mode)
Wedge applications: yes
Pole mount: 35 mm
Power supply: PoE+ (IEEE 802.3 at)
Dimensions: 304 x 248 x 236 mm
Weight: 6.00 kg

Compact amplified subwoofer, Dante™ processed, PoE+ • Latest generation 60 W class D amplifier board with integrated DSP • Omnidirectional • Wooden cabinet - Euroblock connector for use with external amplification • Base plate for coupling with SPIK 6 (with SMP tube) • Remote control of volume, bass, treble via FRENETIK Adjust software • Board temperature monitoring • No logo on front panel

Technical data:
Type: Amplified Sub, Dante™ PoE+
Power (passive mode): 150 W (8 ohms)
Amplification: 60 W (class D)
Dante™ Receiver: 1 (16 / 24 / 32 bit - 44.1 à 96 kHz)
Transducers: 1 x 8" woofer
Peak SPL capacity (1 m): 119 dB
Bandwidth (-10 dB): 40 Hz - 100 Hz
Input connectors: 1 x RJ45 (Dante™ active mode) + 1 Euroblock (passive mode)
Top plate : for SMP tube
Insert : no
Power supply: PoE+ (IEEE 802.3 at)
Dimensions: 330 x 290 x 400 mm
Weight: 12.00 kg

2 way 8" coaxial ceiling speaker, Dante™ PoE+ • last generation 60W class D amplifier card with integrated DSP • Allows powering of another passive ceiling Spik Up P • Wide and homogeneous directivity 100° x 100° • Euroblock connector for use with external amplification • Remote control of volume, bass, treble via FRENETIK Adjust software • Temperature monitoring • No logo on the front

Technical data:

Type: Amplified 2-way coaxial ceiling speaker, Dante™ PoE+
Power (passive mode): 40 W (8 ohms)
Amplification: 60 W (class D)
Dante™ Receiver: 1 (16 / 24 / 32 bit - 44.1 à 96 kHz)
Transducers : 1 x 8" woofer / 1 x 1" tweeter
Peak SPL capacity (1 m): 110 dB
Bandwidth (-10 dB): 100 Hz - 16 kHz
Directivity (H x V): 100° x 100°
Connection: 1 x RJ45 (Dante™ active mode) + 1 Euroblock (passive mode)
Cut out diameter: : Ø 240 mm
Power: PoE+ (IEEE 802.3 at)
Dimensions: Ø 272 x P 187 mm
Weight: 3.10 kg

Amplified speaker system, 2-way 3", Dante™ PoE+

Amplified speaker system, 2-way 3″, Dante™ PoE+
Ultra compact 2-way powered aluminium speaker system – Dante™ and PoE+ • 60W class D amplifier card with integrated programmed DSP • Wide and homogeneous directivity 95° x 85° • Remote control of volume, bass and treble via FRENETIK Adjust software • Temperature monitoring of the card • No logo on the front panel. Available in Black or White.
Technical data:
• Ref.: SP30DP (black) | SP30DP-W (white)
• Type: 2-way amplified speaker, Dante™ PoE+
• Amplification: 60 W (class D)
• Dante™ Receiver: 1 (16 / 24 / 32 bit - 44.1 à 96 kHz)
• Transducers: 1 x 3" woofer / 1 x 3" tweeter
• Peak SPL capacity (1 m): 109 dB
• Bandwidth (-10 dB): 125 Hz - 20 kHz
• Directivity (H x V): 100° x 100°
• Input connector: 1 x RJ45
• Insert: 2 x M10
• Power supply: PoE+ (IEEE 802.3 at)
• Dimensions: 205 x 95 x 117 mm
• Weight: 2.40 kg
• Packaging: per pair

Compact 2-way coaxial wide-opening amplified processor speaker, Dante™ PoE+ • 60W class D amplifier board with integrated latest generation DSP • Wide and homogeneous directivity 95° x 95° • Wooden cabinet • Euroblock connector for use with external amplification • Remote control of volume, bass, treble via FRENETIK Adjust software • Board temperature monitoring • No logo on front panel

Technical data :
Type: Amplified 2-way coaxial speaker, Dante™ PoE+
Power (passive mode): 60 W (8 ohms)
Amplification: 60 W (classe D)
Dante™ Receiver: 1 (16 / 24 / 32 bit - 44.1 à 96 kHz)
Transducers: 1 x 5" woofer / 1 x 1" tweeter
Peak SPL capacity (1 m): 112 dB
Bandwidth (-10 dB): 90 Hz – 20 kHz
Directivity (H x V): 95° x 95°
Input connectors: 1 x RJ45 (Dante™ active mode) + 1 Euroblock (passive mode)
Insert: 4 x M6
Power supply: PoE+ (IEEE 802.3 at)
Dimensions: 165 x 165 x 193 mm
Weight: 2.50 kg

Dante Audio Networked Enabled Speaker System

VIO L1610 is a three-way active line array system, entirely equipped with neodymium components:

2x10" woofers (2.5” v.c.), providing an extended LF reproduction, interact with a coaxial neodymium component (4” MF plus a 2,5” v.c. HF compression driver) mounted on an exclusively designed waveguide.

This unique coaxial symmetric acoustic design results into the most accurate transient reproduction, which enables VIO L1610 to deliver the most detailed and homogeneous audio performance.
In facts, the coaxial component not only allows an extended low end reproduction of the MF, but guarantees a perfect off-axis coherence alongside with all the benefits coming from woofers' direct radiation, much to the advantage of the system’s headroom.

Dante Card [Optional]

FF1670 performs 16-channel DSP beam filtering to steer the vertical radiation pattern, making column high directive and featuring main propagation lobe less dependent on the frequency.

FF1670 is equipped with 16 high quality, coaxial loudspeakers, each one mounting 4” neodymium woofer + 1’’ dome tweeter, capable to transmit perfect audio.

FF1670 uses 16 x 70 Wrms class-D audio amplifiers with excellent THD+N and high efficiency (90%) and completely protected against thermal over-load.

FF1670 mounts high-reliable, switching power supply (860 W peak) with universal input (90 – 264 VAC).

FF1670 has analog line input and built-in Dante input both.

FF1670 setup comes easy throughout the AVE Line Array User Control PC software, via RS485 connection.

AVE Line Array User Control includes:
• Beam tilting/broadening control;
• Anti-Reverberation System ARS.
• Delay control;
• 8-biquads user equalizer with high/low shelving and parametric filters;

FF1670 cabinet is aluminum extrusion and it is designed and manufactured in Germany.

FF0870 performs 8-channel DSP beam filtering to steer the vertical radiation pattern, making column high directive and featuring main propagation lobe less dependent on the frequency.

FF0870 is equipped with 8 high quality, coaxial loudspeakers, each one mounting 4” neodymium woofer + 1’’ dome tweeter, capable to transmit perfect audio.

FF0870 uses 8 x 70 Wrms class-D audio amplifiers with excellent THD+N and high efficiency (90%) and completely protected against thermal over-load.

FF0870 mounts high-reliable, switching power supply (430 W peak) with universal input (90 – 264 VAC).

FF0870 has analog line input and built-in Dante input both.

FF0870 setup comes easy throughout the AVE Line Array User Control PC software, via RS485 connection.

AVE Line Array User Control includes:
• Beam tilting/broadening control;
• Anti-Reverberation System ARS.
• Delay control;
• 8-biquads user equalizer with high/low shelving and parametric filters;

FF0870 cabinet is aluminum extrusion and it is designed and manufactured in Germany.

FF2470 performs 24-channel DSP beam filtering to steer the vertical radiation pattern, making column high directive and featuring main propagation lobe less dependent on the frequency.

FF2470 is equipped with 24 high quality, coaxial loudspeakers, each one mounting 4” neodymium woofer + 1’’ dome tweeter, capable to transmit perfect audio.

FF2470 uses 24 x 70 Wrms class-D audio amplifiers with excellent THD+N and high efficiency (90%) and completely protected against thermal over-load.

FF2470 mounts high-reliable, switching power supply (1290 W peak) with universal input (90 – 264 VAC).

FF2470 has analog line input and built-in Dante input both.

FF2470 setup comes easy throughout the AVE Line Array User Control PC software, via RS485 connection.

AVE Line Array User Control includes:
• Beam tilting/broadening control;
• Anti-Reverberation System ARS.
• Delay control;
• 8-biquads user equalizer with high/low shelving and parametric filters;

FF2470 cabinet is aluminum extrusion and it is designed and manufactured in Germany.

2-WAY SELF-POWERED LOUDSPEAKER

Extremely approachable EAWmosaic™ iOS app delivers system prediction, control and monitoring from any location in the venue.

Proven EAW acoustical design and DSP including Focusing™ and DynO™ provides a pristine impulse response at all output levels.

Four pre-defined voicings provide a variety of tonal starting points.

Integrated Dante™ networking (with loop-thru) on all models including Analog redundancy capability.

Dante 4 5” Column Speaker

Specifications

Dante Wall Mount Speaker System

Specifications

Dante Wall Mount Speaker System

Specifications

• Column-type speaker system
• Built-in 1-channel audio amplification module
• Module with closed silent silent design
• POE drive operation
• With RJ45 interface, Dante transmission protocol, which can receive Dante digital audio to decode it to enhance audio
• With 5-band PEQ control, parameter preset, channel gain and muting control
• Support network remote detection and control

Dante Wall Mount Speaker System

Specifications

Características

• Caixa acústica duas vias 1 x AF de 12” + driver 2”
• Duas versões de guia de onda: 60º x 60º ou 90º x 60º
• DSP Interno (Digital Signal Processor) com controle via PC ou MAC através de protocolo TCP-IP
• Falante de baixa compressão de potencia com bobina de 3”
• Amplificação Digital e fonte chaveada
• Flytrack superior e lateral para içamento
• Quatro pontos M6 para suporte pan/Tilt e flange 35mm para pedestal
• Corneta rotacionável para montagem na vertical / horizontal
• Formato PA / monitor simétrico – caixa L e R
• Presets e Filtro High Pass selecionável através de software com comando no painel traseiro
• Entradas de áudio digital protocolo Dante opcional

Características

• Line array expansível amplificado 12 x 3” e 8 tweeters
• Gabinete com dissipador integrado extrudado, em alumínio estrutural 6061-T6
• Fonte Chaveada e Amplificação digital
• Clareza na reprodução de voz
• Maior ganho antes da microfonia
• DSP Interno (Digital Signal Processor) com controle via PC ou MAC através de protocolo TCP-IP
• Presets e Filtro High Pass selecionável através de software com comando no painel traseiro
• Entradas de áudio digital protocolo Dante opcional