Dante-enabled Product Catalog

392_For_Dante_Website
  • Studio Technologies

Studio Technologies – Model 392 Visual Indicator Unit

The Model 392 is designed for a variety of applications that require a visual status indicator. An array of red/green/blue (RGB) LEDs provide backlighting for a distinctively shaped polycarbonate (plastic) lens assembly. The Model 392 can serve as a broadcast "on-air" light, a room occupied display, or an intercom call signal indicator. In addition, the unit can serve as an audio level display, with a green, yellow, and red indication of audio level. Full operation requires only a Power-over-Ethernet (PoE) 100 Mb/s data connection. It's compatible with the popular Dante® audio-over-Ethernet protocol but offers support for a range of additional applications. Configuration is performed using the Studio Technologies' STcontroller software application. Selected configuration values are stored within the Model 392's non-volatile memory. A variety of methods are provided to allow control of the Model 392's LED array. These include using STcontroller's "virtual" button, receiving network-transported UDP commands, and responding to an audio signal level associated with a Dante digital audio connection.

Key Features

Dante audio-over-Ethernet technology

General-purpose visual indicator with RGB LEDs

On, flashing, and audio level displays

Responds to high-frequency (18-23 kHz) call, UDP commands, and PCM audio data

Mounts in a US-standard 2-gang electrical box

Single Decora-style lens opening dimensions

Configured using STcontroller application

Power-over-Ethernet (PoE) powered

  • I/O Interfaces
  • Dante Ch: 1x0
  • 24-bit
AE16O-D_Front_Back
  • Autograph

Autograph – AES16O-D

The AES16O-D is a 16 Channel Dante to AES output converter.

Housed in a 1U unit with dual redundant Internal power supplies as standard.

8 x XLR outputs for 16 Channels of AES

Primary and Secondary Dante connections

44.1/48/88.2/96K Sample Rates.

  • I/O Interfaces
Dante官网logo
  • BARE

BARE – BR-1112D

Features: ●The high-quality pre-op amplifier guarantees the output sound quality and controls the output volume of each channel ●Advanced digital reverberation modulation function ●Twelve microphone input sockets. Independent phantom power supply for each channel, independent input volume adjustment, independent switch indicator ●The device itself provides a mixing channel, mixing input twelve microphones (each microphone can adjust the volume of the output to the mixing channel), while controlling the final output mixing volume ●Each input channel and mixing channel have an independent output, and the input channel and mixing channel can be monitored locally ●The equipment allows nearby installation, and the network transmits the audio of independent channels and mixed channels to the remote power amplifier or mixer ●With device superimposition function (when there are more than twelve microphones, two sets of this device can be superimposed and used) ●Twelve channels of microphones can be adjusted individually, which can also use various types and indicators of microphones to ensure that the microphone volume input and output in the system are balanced ●Only one audio equipment of the power amplifier, with this equipment can drive multiple, even dozens of microphones to work ●The panel displays the network status, which is convenient for fault diagnosis ●RS232/RS485 remote control interface reserved ●Only one network port, daisy chain connection is not allowed ●The network IP of the device can be set independently ●Microphone connection matching: phantom or non-phantom powered microphone ●Microphone connection: 12 XLR sockets
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – BE-1212D

The network audio processing center is a network audio processor with 20 inputs (12 analog and 8 digital) and 20 outputs (12 analog and 8 digital), using the industry-leading ADI DSP SHARC21489 chip, The highest operating frequency can reach 450MHz. The input and output modules of the DSP can be customized according to the actual situation. At the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic mixing, threshold automatic mixing and other processing modules to meet the needs of audio processors and transmissions in various places. Such as meeting rooms, multi-function halls, conference center auditoriums, administrative centers, etc.
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – DF-12

A network active speaker is an active full-range speaker that integrates network transmission, pure digital power amplifier and RS-232 control and monitoring. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. It has a backup analog input interface and a Dante network interface, which can transmit dual backups. It can be connected to the built-in Dante board through a network cable to realize network audio signal transmission. The IP address is automatically assigned through the router DHCP, and the signal is transmitted with the audio matrix with dante function in the local area network, and a set of all-digital network sound reinforcement system can be easily formed. It is suitable for classrooms in primary and middle schools, small and medium-sized meeting rooms, corridor broadcasting and other places.
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – BR-1031DM

Features: 1. Equipped with 5 groups of RJ45 loopback signal acquisition interface, "ring hand in hand" connection, the system is more reliable 2. Conventional network cable (Cat5e or Cat6) connection between each unit is convenient and quick 3. Each group of lines can connect 30 units, a single machine can connect 150 units, and an expander can be added to connect more units 4. Support WiFi for all control functions of the central processor 5. Support Dante network transmission, and additionally support three-way LINE/MIC input Dante network, which can be set through software 6. Remote control and remote assistance can be carried out through the TCP/IP network interface 7. Support meeting functions: discussion, video tracking, voting, sign-in 8. Support system hot swap 9. Support RS232 central control control, and have two-way code sending function, realize seamless connection with intelligent central control system 10. Support external audio input and recording output port 11. Support access port for conference call 12. The system can be set to lock or release the function of the microphone operation, and each unit has an electronic volume adjustment function. 13. Multiple speaking modes: first in first out, last in first out, automatic mode, discussion mode, chairman mode 14. With voice control to turn on the microphone function and speech time limit function (optional 1-999 seconds) 15. Connect to the computer to simulate the scene layout of the on-site meeting, and you can click to turn on or off all the unit microphones at any time 16. The host adopts LCD operation interface (3.5 inches), which can switch various national languages and display perpetual calendar
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – D-60

Product Features: 1. A connection and distribution function between the host and microphone of the digital conference IoT system 2. Equipped with 4 RJ45 ports, 2-way distribution and 2-way connection; 3. Circular hand-in-hand design, equipped with 2 CAT6 super Category 6 wires; 4. One module has two microphone connections; 5. Any module sets the connection of the chairman microphone.
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – DT-U

The D series converter box is compatible with all Dante interfaces and has all the features of Dante audio network. Each conversion box can provide high-fidelity sound quality restoration, ultra-low latency, and accurate synchronization of sampling rates across the entire network. Compact design, easy to use, plug and play; conversion between USB audio signal and Dante digital audio signal; expand audio and power through a network cable; fully support Dante software, easy to configure network and audio routing; support USB power supply, Built-in lightning and surge protection; it can be used on any PC, Mac or Linux system without reconfiguring the Dante network. It can record and play dual-channel audio at the same time without any other software.
  • I/O Interfaces
  • Dante Ch: 2x2
Dante官网logo
  • BARE

BARE – BE-1208D

The network audio processing center is a network audio processor with 20 inputs (12 analog and 8 digital) and 20 outputs (12 analog and 8 digital), using the industry-leading ADI DSP SHARC21489 chip, The highest operating frequency can reach 450MHz. The input and output modules of the DSP can be customized according to the actual situation. At the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic mixing, threshold automatic mixing and other processing modules to meet the needs of audio processors and transmissions in various places. Such as meeting rooms, multi-function halls, conference center auditoriums, administrative centers, etc.
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – DF-10

Features: 1. Automatically assign IP address through router DHCP; 2. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network. 3. With backup analog input interface and Dante network interface, transmission double backup; 4. With a link output interface, analog audio and digital audio can be connected hand in hand; 5. Integrate network transmission, pure digital power amplifier and full-range speaker with RS-232 control and monitoring; 6. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics; 7. It has perfect protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter).
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – BR-202L

Product Description: 1. Use RJ45 network cable to connect in a "hand in hand" way; 2. Each connection box can connect 4 speaking units; 3. Use professional plugs to connect between the unit and the connection box 4. Connect to the previous connection box or directly connect to the conference host through the RJ45 network port interface, and the active expansion connection box; 5. Connect the LINK port or conference unit of the next connection box through the RJ45 network port interface. 6. Support video tracking
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – D-10

Features: 1. A distributor connecting the host and the generator unit; 2. Provide 4 RJ45 wires, 2 of which are used for manual connection between junction boxes, and 2 are used to connect the transmitter unit; 3. Hand-pull connection method, with 2 CAT6 and over Category 6 wires; 4. Each junction box can be connected to 2 transmitter units; 5. The sending unit connected to the unit with chairperson is the chairperson unit, and the others are the representative units.
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – DT-1

The D series converter box is compatible with all Dante interfaces and has all the features of Dante audio network. Each conversion box can provide high-fidelity sound quality restoration, ultra-low latency, and accurate synchronization of sampling rates across the entire network. Compact design, easy to use, plug and play; conversion between analog audio signals and Dante digital audio signals; expand audio and power through a network cable; fully support Dante software, easy to configure the network and audio routing; support PoE power supply, Built-in lightning and surge protection.
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – BE-0812D

The network audio processing center is a network audio processor with 16 inputs (8 analog and 8 digital) and 20 outputs (12 analog and 8 digital), using the industry-leading ADI DSP SHARC21489, the highest The working frequency can reach 450MHz. The input and output modules of the DSP can be customized according to the actual situation. At the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic mixing, threshold automatic mixing and other processing modules to meet the needs of audio processors and transmissions in various places. Such as meeting rooms, multi-function halls, conference center auditoriums, administrative centers, etc.
  • I/O Interfaces
  • Dante Ch: 8x8
  • 48kHz
Dante官网logo
  • BARE

BARE – DF-8

Features: 1. Automatically assign IP address through router DHCP; 2. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network. 3. With backup analog input interface and Dante network interface, transmission double backup; 4. With a link output interface, analog audio and digital audio can be connected hand in hand; 5. Integrate network transmission, pure digital power amplifier and full-range speaker with RS-232 control and monitoring; 6. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics; 7. It has perfect protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter).
  • I/O Interfaces
  • Dante Ch: 8x0
  • 48kHz
Dante官网logo
  • BARE

BARE – BR-102E/F

Features: Anti-cell phone, RF radio frequency interference. The embedded unit is powered by the host computer through the network cable (DC24V); The unit adopts network cable (Category 5 or Category 6) ring-shaped hand-in-hand connection Zinc alloy base is adopted, and the gooseneck is equipped with a green work indicator, which is intuitive and simple to operate and clear instructions; All buttons of the microphone are made of high-quality long-life materials, moisture-proof and dust-proof mute switch, to prevent the influence of noise when starting up; When the microphone is turned on, the switch will automatically emit a green light to indicate that it effectively prevents misoperation. All buttons adopt high-quality, long-life, moisture-proof and dust-proof switches.
  • I/O Interfaces
image007
  • BARE

BARE – DCS-100C/D

1. Exquisite and elegant design, ergonomic, very modern. 2. Original D-net IOT digital conference IoT system technology, in line with IEC60914 international standard 3. With priority button function, you can turn off the representative unit that is speaking. 4. The microphone is equipped with an ultra-quiet electronic touch switch, which can avoid the mechanical sound amplification of the switch, and can control the operation of the microphone. The microphone has a bright luminous halo to indicate the working status. 5. The unique audio processing circuit improves the clarity of the entire system. 6. Fixed square array microphone pole with variable directivity. 7. The chairman unit can use the priority button (Priority) and the approval button (Permit) to control the speaking sequence and control the meeting atmosphere. 8. The self-developed technology of D-net IOT digital conference IOT system realizes five adjustable modes of directivity of the pickup microphone: omnidirectional, cardioid, super-cardioid, sharp-hearted, Figure- 8-pointing type; 9. Two-color LED indicator light, green when speaking; 10. The unit comes with a 2m Category 6 RJ45 network cable; 11. Independently adjust the microphone gain, which can be adjusted on the microphone or computer management software, so that speakers with different volumes can speak more smoothly; 12.1 Ø 3.5 mm stereo headphone jack can be connected to headphones. 13. The unique ID number of the microphone unit can be manually assigned to the conference unit by the conference system.
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – DR-1

Features: The D series converter box is compatible with all Dante interfaces and has all the features of Dante audio network. Each conversion box can provide high-fidelity sound quality restoration, ultra-low latency, and accurate synchronization of sampling rates across the entire network. Compact design, easy to use, plug and play; conversion between analog audio signals and Dante digital audio signals; expand audio and power through a network cable; fully support Dante software, easy to configure the network and audio routing; support PoE power supply, Built-in lightning and surge protection.
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – BE-0808D

The network audio processing center is a network audio processor with 16 inputs (8 analog and 8 digital) and 16 outputs (8 analog and 8 digital), using the industry-leading ADI DSP SHARC21489 chip, The highest operating frequency can reach 450MHz. The input and output modules of the DSP can be customized according to the actual situation. At the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic mixing, threshold automatic mixing and other processing modules to meet the needs of audio processors and transmissions in various places. Such as meeting rooms, multi-function halls, conference center auditoriums, administrative centers, etc.
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – DC-39I

Features: 1. The integration of power over Ethernet and audio data transmission realizes simplified cable layout and conforms to Ethernet engineering specifications; 2. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 3. The built-in DSP network active speaker can remotely monitor and control the EQ of the active speaker, the voltage and current at both ends of the speaker on the PC side. 4. The appearance of the all-metal cabinet is more compact, elegant, and the sound is transparent and bright. 5. Automatically assign IP address through router DHCP; 6. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network 7. It has perfect protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 8. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – BR-402C/D

Features: 1. Comes with 2 RJ45 interfaces, adopts digital audio transmission and control technology, and has a good sound quality guarantee; 2. Using a detachable microphone pole, simple operation and convenient product maintenance. 3. Condenser microphone with green ring indicator light, easy to distinguish speaking and waiting status 4. In the entire conference system, the chairman unit has priority to speak, and can mute/close the speech of any representative unit that is speaking, so that the chairman unit can effectively control the order of the meeting place 5. Good anti-GSM interference ability 6. With video tracking
  • I/O Interfaces
DCS-101主机
  • BARE

BARE – DCS-101DMX

1. Original D-net IOT digital conference IoT system technology, in line with IEC60914 international standard 2. Support 41kHz/48kHz audio sampling rate, long-distance transmission will not have any impact on sound quality 3. The host computer and the computer can be connected through TC/IP or network access WiFi to realize wireless control mode, and the host can realize IP-based address allocation to realize distributed application management 4. D-net IOT technology can realize the flexible completion of networking or independent partitioning of multiple conference systems, and a variety of conference fields can be used for expansion 5. Dante network audio interface, support to match any Dante audio equipment, and realize computer host computer software control and I Pad software remote control to set various parameter values through the use of TCP/IP connection; 6. Support Ethernet (POE) power supply, digital signal, DSP control, one cable digital link system unit adopts loop loop connection (1 output, 1 backup input) to ensure the efficient and normal use of the system. 7. The system supports line "hot plugging", and microphones can be added to the system at any time 8. With the camera tracking host, after using the computer preset, the camera can automatically track and support the preset panoramic position 9. The self-developed technology of D-net IOT digital conference IOT system realizes five adjustable modes of directional microphones: omnidirectional, cardioid directional, super-cardioid directional, sharp-heart directional, Figure- 8-pointing type; 10. The system host supports dual-backup output of analog and digital signals, and supports dual-backup power supply for POE power supply and external 24V module; 11. Optional external 4-inch wall control touch screen for conference host management and settings, which is convenient and efficient, and can display the following information at the same time: a. Time-limited mode: The speech time limit can be set to 1-60 minutes, and the speech will be automatically closed when the time is up. After reaching the power-on quantity, when another representative unit wants to speak, it will automatically enter the request-to-speak registration queue. b. First-in-first-out mode: First-in-first-out speaking mode (factory preset position), after reaching the number of power-on, the speaking unit opened first is closed by the subsequent speaking unit. c. Application for speaking mode: the speaking of the representative unit needs to be approved by the chairman unit or the operator. In this mode, the chairman unit always keeps the normally open state. d. First-in-first-out mode; you can choose 1/2/4/6 microphones to speak at the same time, and the chairman microphone and VIP microphone can be preset without restriction. e. Volume adjustment of main output 12. The system can be connected to PC control to achieve centralized microphone management. Through software, microphone pickup gain adjustment, forced switching, speaker information registration, can initiate sign-in function, detect microphone line conditions, software set VIP unit, VIP unit The switch is not limited by the number of conference units that are open at the same time and the speaking mode 13. Network-based collaborative management, the system host can set the IP address, and use advanced TCP/IP network connection between the control PC and the host, such as the network access WIFI, which can realize the wireless control and management of the PC and the host, and realize the distributed Application and management. 14. Input and output interface: 4-channel balanced microphoneline input, using phoenix plug interface; 4-channel balanced audio output, using Phoenix plug interface; 4-channel network DANTE audio input, using RJ45 network interface; 4-channel network DANTE audio output, using RJ45 network interface; Support up to 48K/96K, 24BIT uncompressed CD-level sound quality; 15. Provide two wireless UHF ultra-high frequency handheld microphones for auxiliary pickup. 16. Built-in feedback suppressor, noise cancellation, echo cancellation and other main algorithms; 17. A variety of control methods, which can be managed by computer, central control, touch panel, etc.; 18. Provide 6 100/1000M adaptive RJ45 ports, single port maximum power 60W, automatic detection and identification of standard PoE power receiving equipment; 19. Provide 1 100/1000M adaptive RJ45 port as uplink port; 20. Provide 1 Gigabit SFP optical fiber module expansion slot; 21. With a variety of audio processing functions such as; 31-band equalizer, 13-parameter equalizer, compressor, limiter, expander, crossover, crossover, mixer, filter, noise gate, dumb Sounder, automatic gain, signal indicator and signal generator, etc.; 22. Multiple conference hosts can be used as independent conference systems, or can be easily expanded to form a large-scale conference system to achieve flexible configuration of multiple conference rooms 23. Dante interface, transmit audio signals through the network, low delay, high efficiency, realize real-time audio interconnection in large conferences or multiple conference rooms, and support mainstream network audio protocols
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – WTX-D

A network media matrix mainly used for local meetings, education and remote interactive education. It is equipped with excellent digital audio processing technology, eight-channel audio processing, including full-band adaptive echo cancellation, automatic noise suppression, and feedback suppression algorithms. Wireless microphone pickup, exquisite pen microphone, automatic frequency linking at boot, simple operation; comes with 6+1 network ports, supports PoE, 100/1000M adaptive, 100 meters transmission distance, supports IEEE802.3af/at standard, single port The maximum power is 60W. Easily meet the high-quality voice needs of local sound reinforcement, recording and broadcasting, and remote interactive education.
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – BE-0404D

The network audio processing center is a network audio processor with 8 inputs (4 analog and 4 digital) and 8 outputs (4 analog and 4 digital), using the industry-leading ADI DSP SHARC21489 chip, The highest operating frequency can reach 450MHz. The input and output modules of DSP can be customized according to the actual situation. At the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic mixing, threshold automatic mixing and other processing modules to meet the needs of audio processors and transmission in various places. Such as meeting rooms, multi-function halls, conference center auditoriums, administrative centers, etc.
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – DC-34I

Features: 1. The integration of power over Ethernet and audio data transmission realizes simplified cable layout and conforms to Ethernet engineering specifications; 2. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 3. The built-in DSP network active speaker can remotely monitor and control the EQ of the active speaker, the voltage and current at both ends of the speaker on the PC side. 4. The appearance of the all-metal cabinet is more compact, elegant, and the sound is transparent and bright. 5. Automatically assign IP address through router DHCP; 6. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network 7. It has perfect protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 8. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.
  • I/O Interfaces
Dante官网logo
  • BARE

BARE – BR-102C/D

Features: 1. Good anti-GSM interference ability; 2. Using a detachable microphone pole, simple operation and convenient product maintenance; 3. Condenser microphone with double color ring indicator light, easy to distinguish speaking and waiting status; 4. Comes with 2 RJ45 interfaces, adopts digital audio transmission and control technology, and has a good sound quality guarantee; 5. It can realize video tracking. When any unit speaks, the video head will automatically turn to the set position. 6. The sound level of this unit can be individually adjusted on each unit to mute the sound. 7. In the entire conference system, the chairman unit has the priority to speak, and can mute/close the speech of any representative unit that is speaking, so that the chairman unit can effectively control the order of the meeting place.
  • I/O Interfaces
  • Dante Ch: 0x0
DCS-100MU
  • BARE

BARE – DCS-100MU

1. Original D-net IOT digital conference IoT system technology, in line with IEC60914 international standard 2. Support 41kHz/48kHz audio sampling rate, long-distance transmission will not have any impact on sound quality 3. The host computer and the computer can be connected through TC/IP or network access WiFi to realize wireless control mode, and the host can realize IP-based address allocation to realize distributed application management 4. D-net IOT technology can realize the flexible completion of networking or independent partitioning of multiple conference systems, and a variety of conference fields can be used for expansion 5. Dante network audio interface, support to match any Dante audio equipment, and realize computer host computer software control and I Pad software remote control to set various parameter values through the use of TCP/IP connection; 6. Support Ethernet (POE) and 220V AC mains dual power supply, digital signal, DSP control, a cable digital link system unit adopts loop loop connection (1 output, 1 backup input) to ensure that the system can be used efficiently and normally. The system is more reliable and supports line "hot plugging", and microphones can be added to the system at any time 7. With the camera tracking host, after using the computer preset, the camera can automatically track and support the preset panoramic position 8. With D-net IOT digital conference IOT system independently researched and developed to realize five kinds of directional adjustable modes of pickup microphone: omnidirectional, cardioid directional, super cardioid directional, sharp-heart directional, Figure- 8-pointing type; 9. The system host supports dual backup output of analog and digital signals, and supports dual backup power supply of POE power supply and external 24V module; 10. Optional external 3.5-inch wall control touch screen for conference host management and settings, convenient and efficient, and can display the following information at the same time: a. Time-limited mode: The speech time limit can be set to 1-60 minutes, and the speech will be automatically closed when the time is up. After reaching the power-on quantity, when another representative unit wants to speak, it will automatically enter the request-to-speak registration queue. b. First-in-first-out mode: First-in-first-out speaking mode (factory preset position), after reaching the number of power-on, the speaking unit opened first is closed by the subsequent speaking unit. c. Application for speaking mode: the speaking of the representative unit needs to be approved by the chairman unit or the operator. In this mode, the chairman unit always keeps the normally open state. d. First-in-first-out mode; you can choose 1/2/4/6 microphones to speak at the same time, and the chairman microphone and VIP microphone can be preset without restriction. e. Volume adjustment of main output 11. The system can be connected to PC control to realize centralized microphone management. Through software, microphone pickup gain adjustment, forced switch, speaker information registration, can initiate sign-in function, detect microphone line conditions, software set VIP unit, VIP unit The switch is not limited by the number of conference units that are open at the same time and the speaking mode
  • I/O Interfaces
1 … 5 6 7 8 9 … 32