Cart
← Back to Product Catalog

BARE – BE-0404D

I/O Interfaces

More details

Similar Products

ru-mlb2_400px|ru-mlb2_400px
  • RDL

RDL – RU-MLB2

The RU-MLB2 is a high quality mic/line-level bi-directional Dante network interface. The RU-MLB2 converts two mic or line-level audio sources to Dante network channels, and two Dante network audio signals to balanced line level. LED audio signal indicators are provided. Model RU-MLB2P operates from PoE.

The RU-MLB2 is a high quality mic/line-level bi-directional Dante network interface. The RU-MLB2 converts two mic or line-level audio sources to Dante network channels, and two Dante network audio signals to balanced line level.

Each input is switch-selectable for mic or line level. In the mic position, the balanced input provides P48 phantom to an associated microphone jack. Connection of a dynamic microphone automatically sets the preamplifier gain to 60 dB. Connection of a condenser microphone automatically sets the gain to 40 dB. The automatic gain setting is always active so that no user adjustment is required when changing microphones.

The RU-MLB2 is also available in a PoE version (RU-MLB2P). If PoE power and an external 24 Vdc supply are both feeding an RU-MLB2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.

    I/O Interfaces
See the product
  • Blustream

Blustream – DA22XLR-WP-EU

The DA22XLR-WP is a multi-input / output wall plate to convert analogue audio within a digital Dante® networked audio system. The DA22XLR-WP features 2 input channels of balanced / unbalanced / MIC audio with switchable 48v phantom power and 2 output channels of balanced / unbalanced audio. The DA22XLR-WP is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply, offers support for AES67 RTP audio transport and magnetic faceplate design allows for both UK & EU backbox compatibility.
    I/O Interfaces
See the product
junger-option-board-aoip-dante_1200px|junger-option-board-aoip-dante_1200px
  • Jünger

Jünger – Option Board Dante I/O

With up to 16 channels, the Dante™ I/O option board is meant to extend the interface capabilities of any Jünger Audio D*AP device. The modular approach of these devices allows combining different interface standards. Note: This product is not sold separately. It is an option card for Dante compatibility with Junger's product suite. With up to 16 channels, the Dante™ I/O option board is meant to extend the interface capabilities of any Jünger Audio D*AP device. The modular approach of these devices allows combining different interface standards. Thus, it is possible to add advanced audio processing to your Dante™ network and bridge to other interface standards like AES/EBU, 3G SDI, MADI and analog. The Dante™ option board user interface is capable of displaying all signal names and labels within the D*AP device to make the routing as easy as possible. Further, the network configuration can easily be set up. D*AP devices equipped with this option board may work as sync slaves or can operate as a clock master (preferred master) for a Dante™ network. When configured as a sync master, it is possible to sync a Dante™ network to a SDI video signal.
    I/O Interfaces
See the product