Cart
← Back to Product Catalog

BARE – BE-1212D

I/O Interfaces

More details

Similar Products

attero-tech-synapse-D16Mio|attero-tech-synapse-D16Mio
  • Attero Tech by Q-SYS

Attero Tech by Q-SYS – Synapse D16Mio

The Synapse D16Mio is a 16 Channel I/O 1RU Dante™ / AES67 interface. Features
  • 16 studio-grade mic preamps with line level capability as well
  • Front panel network control of mic preamp gain, phantom power, mic/line input sensitivity
  • 16 line level balanced outputs with front panel or network level control
  • Useful for studio, live, rental and fixed installations requiring high numbers of high quality audio I/O
  • Supports Dante™-AES67 Interoperablity Mode
  • 16/24 bit, 44.1/48/88.2/96 kHz analog to Dante™ conversion
  • Easily assignable front panel headphone access, volume control and source selection - includes local input and Dante™ monitoring modes
  • Integrated power supply with optional external supply for applications  requiring redundant power requirements
  • Integrated SFP ports for direct connection to fiber for long haul signal extension applications
    I/O Interfaces
  • Dante Ch: 16x16
  • 16-bit, 24-bit
See the product
yamaha-swr2100p_5g_1200px
  • Yamaha

Yamaha – SWR2100P-5G

Complex network switch setup that was previously better left to an IT technician can now be easily accomplished by anyone. A simple switch setting is all it takes to optimize SWP1 series network switches for Dante operation, and a dedicated Windows application provides “network visibility” for comprehensive monitoring and control. Yamaha has used its knowledge of both IT and pro audio to provide "SWR2100P series" simple L2 switch that has been optimized for networked audio installations. The switch can take advantage of "Yamaha LAN Monitor" a dedicated Windows application that provides 'network visibility' for comprehensive monitoring and control. The "SWR2100P series” which are simple L2 switches can supply power as well as audio and control signals to a PoE-compliant Dante device such as the paging station microphone “PGM1” through just one Ethernet cable. Since the power supply and the network wiring can be combined, the number of cables being used can be reduced, and the connection distance can be extended, so the degree of freedom of Dante device installation is increased and construction flexibility is further improved. Systems built around the SWR2100P-5G or SWR2100P-10G L2 switches allow comprehensive network monitoring from the dedicated Yamaha LAN Monitor software application, with PoE power status monitoring and ON/OFF switching capability. Understanding how multiple switches installed in different locations are connected, plus how network devices are connected to those switches, can be a difficult, time-consuming task. The Yamaha LAN Monitor makes overall network topology clearly visible, giving the user a comprehensive overview of how multiple switches and Dante network devices are interconnected. Simply connect a Windows PC to the nearest SWR2100P series switch and launch the Yamaha LAN Monitor software. You can take a “snapshot” of the network status when set up as required. The software can then automatically keep track of the settings and alert you to any changes. You could take a snapshot of the network, and then you would be alerted if a cable is disconnected, if a device is turned off, or if a wrong connection is made prior to the performance, for example. Identifying devices connected to a switch by only their IP or MAC address is a difficult and error-prone approach. Connected Dante devices are identified by a Dante icon as well as a device ID previously set up via the Dante Controller software. You can also enter additional info, such as the location of the device, in the Label and Comment fields. If the monitoring device does not respond to a Ping, it judges that a fault has occurred and automatically stops the PoE power supply to that device and then resumes it. This restarts the monitoring equipment and attempts recovery. By collectively managing the status of the devices distributed over a wide area, it can ensure that equipment management can operate far more smoothly.
    I/O Interfaces
See the product
  • Turtle AV

Mineola 8×8

The ultimate 8x8 Dante audio bridge. The Mineola 8x8 seamlessly connects the digital Dante and analog XLR worlds with eight inputs and eight outputs, all housed in a compact 1RU form factor for maximum efficiency. PoE powered and equipped with 48V phantom power on all XLR inputs, it’s perfect for handling high-density audio connections in professional environments. All connectors are locking, featuring Neutrik etherCON on the dual network ports for reliable redundancy. Fully compatible with the entire Dante software suite, the Mineola 8x8 integrates effortlessly into live event production systems like vMix, Vizrt Vectar, Vizrt TriCaster, OBS, and Telestream Wirecast. With its unmatched density and versatility, the Mineola 8x8 is the ultimate solution for demanding audio setups.
    I/O Interfaces
  • Dante Ch: 8x8
  • 16-bit, 24-bit
See the product