Dante-enabled Product Catalog

Dante Network Input Panel

64 Input and 64 Output Digital Audio Processor, with Dante network transport protocols

16 Input and 16 Output Digital Audio Processor, with Dante network transport protocols

The new DN 30T, a compact Audinate Dante audio transmitter for connecting mic/instrument or line level sources to a Dante network. The DN 30T can be connected to any Dante receiver via a standard CAT5e or CAT6 cable. This same connection can be used to power the device through Power over Ethernet (PoE) or via a 24-volt DC input. The DN 30T has stated 96 kHz analog to digital conversion. Balanced or unbalanced 1/4-inch, RCA or stereo 1/8-inch cables are available for connecting to either a smartphone, tablet, microphone or instrument. Input levels can also be adjusted via the level knob. The compact DN 30T is encased in a thick aluminum extrusion housing to protect the electronics. The enclosure also has rubber corner bumpers. Floor and wall mount brackets are included for fixed installation applications.

DIC2523A is a high quality Dante interface box for converting two Dante channels to Analogue Audio outputs, and two Analogue Audio inputs to Dante network. Features: *One Mic/Line XLR Input and One Mini-jack Input on Front Panel *Terminal Block for Two Audio Outputs on Rear Panel *Mini-jack Input is set to Mono signal *Converts Mic or Line Audio Signals to Dante Network *Mic or Line is Selectable for XLR Input *Switchable 48V Phantom Power for Mic XLR Input *Adjustable Mic/LIne Gain from -20 dB to +20dB for Each Input Channel *Two Audio Signal Outputs from Dante Network *Balanced or Unbalanced Signal Outputs *High Resolution 24 Bit for DAC and ADC *Power over Ethernet (PoE) or 24VDC power supply *Provides High Quality of Preamplifier for Microphones *Dimension: 116mm x 114.5mm x 53.1mm (WHD)

DIC2E23A is a high quality Dante interface box for converting two Dante channels to Analogue Audio outputs, and two Analogue Audio inputs to Dante network. Features: *Two Mic/Line Terminal Block Inputs on Rear Panel. *Converts Mic or Line Audio Signals to 2 Channels Dante Network. *Switchable Mic/Line/48V Phantom Power for Each Input. *Terminal Block for Two Audio Outputs on Rear Panel *Two Audio Signal Outputs from Dante Network. *Converts 2 Channels Dante Signals to Two Line Terminal Block Outputs. *Balanced or Unbalanced Signals for Inputs and Outputs. *Adjustable Gain Control for Output Level on Rear Panel. *LED indicators for Signal Level and Clip of Each Input Channel on Front Panel. *Adjustable Gain from -20 dB to +20dB for Each Input Channel on Front Panel. *LED indicators for Signal Level of Each Output Channel on Front Panel. *Power over Ethernet (PoE) or 24VDC power supply *LED Indicators Show the Status of Power and Network. *High Resolution 24 Bit for DAC and ADC *Provides High Quality of Preamplifier for Microphones. *Dimension: 143mm x 45mm x 93mm (WHD)

DIC2223AU is a high quality Dante interface box for converting two Dante channels to Analogue Audio outputs, and two Analogue Audio inputs to Dante network. Features: *Two Mic/Line XLR Inputs and Output on Front Panel *Terminal Block for Two Audio Outputs on Rear Panel *Converts Mic or Line Audio Signals to Dante Network *Mic or Line is Selectable for XLR Input *Switchable 48V Phantom Power for Mic XLR Input *Adjustable Mic/LIne Gain from -20 dB to +20dB for Each Input Channel *Two Audio Signal Outputs from Dante Network *Balanced or Unbalanced Signal Outputs *High Resolution 24 Bit for DAC and ADC *Power over Ethernet (PoE) or 24VDC power supply *Provides High Quality of Preamplifier for Microphones *Dimension: 116mm x 114.5mm x 53.1mm (WHD)

DIC2223A is a high quality Dante interface box for converting two Dante channels to Analogue Audio outputs, and two Analogue Audio inputs to Dante network. Features: *Two Mic/Line XLR Inputs and Output on Front Panel *Terminal Block for Two Audio Outputs on Rear Panel *Converts Mic or Line Audio Signals to Dante Network *Mic or Line is Selectable for XLR Input *Switchable 48V Phantom Power for Mic XLR Input *Adjustable Mic/LIne Gain from -20 dB to +20dB for Each Input Channel *Two Audio Signal Outputs from Dante Network *Balanced or Unbalanced Signal Outputs *High Resolution 24 Bit for DAC and ADC *Power over Ethernet (PoE) or 24VDC power supply *Provides High Quality of Preamplifier for Microphones *Dimension: 116mm x 114.5mm x 53.1mm (WHD)

DIC2523A is a high quality Dante interface box for converting two Dante channels to Analogue Audio outputs, and two Analogue Audio inputs to Dante network. Features: *One Mic/Line XLR Input and One Mini-jack Input on Front Panel *Terminal Block for Two Audio Outputs on Rear Panel *Mini-jack Input is set to Mono signal *Converts Mic or Line Audio Signals to Dante Network *Mic or Line is Selectable for XLR Input *Switchable 48V Phantom Power for Mic XLR Input *Adjustable Mic/LIne Gain from -20 dB to +20dB for Each Input Channel *Two Audio Signal Outputs from Dante Network *Balanced or Unbalanced Signal Outputs *High Resolution 24 Bit for DAC and ADC *Power over Ethernet (PoE) or 24VDC power supply *Provides High Quality of Preamplifier for Microphones *Dimension: 116mm x 114.5mm x 53.1mm (WHD)

The NEUTRON-NB Network Bridge expansion module compatible with the MIDAS NEUTRON audio system engine provides a multichannel interface between two third party digital audio networks and point-to-point interfaces. The third party interfaces operate in separate clock domains and are connected by a bidirectional asynchronous sample rate converter (ASRC). This unique KLARK TEKNIK technology allows the interfacing of up to 64 bidirectional channels between the two independently clocked domains, which can also operate at different sample rates. Compatible with the KLARK TEKNIK KT-AES50, KT-DANTE64, KT-MADI and KT-USB network modules, NEUTRON-NB is future-proofed in the evolving world of digital audio networking technology by being able to support new and emerging protocols via its two industry-standard expansion slots, which are compatible with the Cirrus CM-1* format.

AMPMix is a system designed to connect with off-the-shelf hardware, and give you complete control of your audio mixing system via multiple and various types of remote devices and hardware controllers.

The Dlogixs DNC-7300 is a Dante enabled public address system.

Sommer Cable's SPY-EDA-20X is a 2 Channel Dante adapter with 2x XLR 3-pole outputs

Sommer Cable's SPY-EDA-20P is a 2 Channel Dante adapter with 2x Phoenix 3-pole RM3,5 outputs

Sommer Cable's SPY-EDA-4OX is a 4 Channel Dante adapter with 2x XLR 5-pole outputs

Sommer Cable's SPY-EDA-4OP is a 4 Channel Dante adapter with 4x Phoenix 3-pole RM3,5 outputs

2–Channel Dante Decoder & PoE Acceptor

• PoE Acceptor.
• Output Volume Control.
• Control — Dante IP Control Matrix and Kramer Protocol 3000.

DIC1R13A is a high quality Dante interface box for converting two Dante channels to CSP products, and two analogue audio input channels from CSP products to Dante network. Features: * Convert CSP B and C signals to Dante network * Convert 2-channel Dante signals to B and C channels of CSP. * Signal level and limit LED indicator for each input channel on the front panel * Adjustable gain for each input channel on the front panel is -20 dB to + 20 dB * LED indicator for the signal level of each output channel on the front panel. * Power over Ethernet (PoE) or 24VDC power supply * LED indicators show power and network status. * High resolution 24-bit of DAC and ADC *Dimension: 143mm x 45mm x 93mm (WHD)

DIC2R43A is a high quality Dante interface box for converting three Dante channels to CSP products, and an additional analogue output. An analogue input channel and  three CSP product input channels to Dante network. Features: * Convert CSP A, B and C signals to Dante network * Convert 3-channel Dante signals to A, B and C channels of CSP. * Signal level and limit LED indicator for each input channel on the front panel * Switchable Line / Microphone / 48V phantom power for auxiliary input * Provide high quality preamplifier for microphone *Adjustable gain for each input channel on the front panel is -20 dB to + 20 dB * LED indicator for the signal level of each output channel on the front panel. * Power over Ethernet (PoE) or 24VDC power supply * LED indicators show power and network status. * High resolution 24-bit of DAC and ADC *Dimension: 146mm x 41.6mm x 96.9mm (WHD)

DIC3533A is a high quality Dante interface box for converting four Dante channels to Analogue Audio outputs, and four Analogue Audio inputs to Dante network. Line Input/Output on the front panel accept Stereo or Mono signal by switches. Features: *Two Mic/Line XLR Inputs and One Mini-jack Input on Front Panel *Terminal Block for Two Audio Outputs on Rear Panel *One Mini-jack Output on Front Panel *Converts Mic or Line Audio Signals to Dante Network *Mic or Line is Selectable for Each XLR Input *Switchable 48V Phantom Power for Each Mic XLR Input *Adjustable Mic/LIne Gain from -20 dB to +20dB for Each Input Channel *Stereo/Mono switch for Mini-jack Input and Output *Four Audio Signal Outputs from Dante Network *Balanced or Unbalanced Signal Outputs *High Resolution 24 Bit for DAC and ADC *Power over Ethernet (PoE) or 24VDC power supply *Provides High Quality of Preamplifier for Microphones *Dimension: 116mm x 114.5mm x 53.1mm (WHD)

DIC4323A is a high quality Dante interface box for converting two Dante channels to Analogue Audio outputs, and four Analogue Audio inputs to Dante network. Features: *Four Mic/Line XLR Inputs on Front Panel *Terminal Block for Two Audio Outputs on Rear Panel *Converts Mic or Line Audio Signals to Dante Network *Mic or Line is Selectable for Each XLR Input *Switchable 48V Phantom Power for Each Mic XLR Input *Adjustable Mic/LIne Gain from -20 dB to +20dB for Each XLR input *Two Audio Signal Outputs from Dante Network *Balanced or Unbalanced Signal Outputs *High Resolution 24 Bit for DAC and ADC *Power over Ethernet (PoE) or 24VDC power supply *Provides High Quality of Preamplifier for Microphones *Dimension: 116mm x 114.5mm x 53.1mm (WHD)

The DIO1616MA-XLR is a Dante enabled interface converting sixteen analogue microphone or line level inputs to Dante streams. The unit also converts Dante streams to sixteen line level analogue outputs. All microphone/line level inputs have adjustable gain from +65dB to -12dB and the analogue outputs from +12dB to -12dB in 1dB steps. Phantom power may be selected to each microphone input. The unit operates at 48kHz and 96kHz and network connection may be copper and/or fibre and is PoE enabled. The DIO1616MA-XLR is a Dante enabled interface converting sixteen analogue microphone or line level inputs to Dante streams. The unit also converts Dante streams to sixteen line level analogue outputs. All microphone/line level inputs have adjustable gain from +65dB to -12dB and the analogue outputs from +12dB to -12dB in 1dB steps. Phantom power may be selected to each microphone input. Network connections may be copper and/or fibre via two SFPs and the unit includes connections for network redundancy. The DIO1616MA is PoE enabled so may be operated without a mains supply if required. All level control and phantom switching is adjusted using the built in web server. The unit operates at sample rates of 48kHz and 96kHz. The unit will also operate in AES67 mode. Power is PoE or mains 110-240 VAC 50/60Hz auto switching. Dimensions 2RU, 300mm deep.

The Topp Pro RTDLM808 is an 8x8 digital matrix with gating, compression, expansion, delay, and crossover capabilities.

The CEDAR DNS 8D has been designed specifically for broadcast and live sound. With eight channels of noise suppression, it hosts a new algorithm that marries the best of the machine learning and signal processing on which the DNS 8 Live and the DNS 2 dialogue noise suppressors are based. CEDAR's Dialogue Noise Suppression technology is the standard for removing background noise from dialogue in studios. With near-zero latency, high-resolution processing, and a fast, intuitive user interface, it eliminates traffic noise, air conditioning, wind, rain, babble and general background noise from audio signals. It will also help to compensate for unfavourable acoustic conditions and poor microphone placement, and will even suppress excessive reverberation. The CEDAR DNS 8D has been designed specifically for broadcast and live sound. With eight channels of noise suppression, it hosts a new algorithm that marries the best of the machine learning and signal processing on which the DNS 8 Live and the DNS 2 dialogue noise suppressors are based. With its slick user-interface that includes standard and detailed modes of operation it offers better control than any previous dialogue noise suppressor, both from the front panel and from almost any web browser that can access its internal remote control software. With its near-zero latency and standard 4-pin 12VDC input in addition to universal mains power, it's suitable for use in all live situations - not just broadcasting, but also live sound in venues such as theatres, concert halls, conferences venues, and places of worship. Dante® is the de-facto standard for media networking, distributing uncompressed, multi-channel digital audio via standard Ethernet networks with near-zero latency and perfect synchronisation. The DNS 8D is the first DNS with a Dante interface in addition to its AES3 audio connections (DB25 using the AES59 pin-out). With fail-safe AES3 audio bypass implemented in the form of hardware relays that immediately connect the inputs to the outputs in the event of a power failure or other significant disruption plus support for Dante's redundant mode of operation which helps to protect against network failure, it can be installed with confidence in critical paths anywhere within the audio chain.

E-Vocal ARS-1616-Stage is a multiple channel analog input and analog output Dante-equipped stage box. This ruggedized unit is a 4U rackmount equipped with analogue converters designed to transfer 16 audio channels over a Dante network in both directions. Features: ‧ 16 analog channels input/output ‧ Robust and portable Stage box ‧ Placed horizontally or vertically . 2 LAN etherCON connectors for redundancy ‧ 96 kHz, 24 bit resolution ‧ Dual AC input and dual PoE power sources for redundancy ‧ Built-in web-based controller

DD4 devices are gateways used to convert DANTETM (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network. DD4 devices are gateways used to convert DANTETM (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network. DD4 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors. It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.

The HDMI/Dante over IP PoE Transmitter, UHD-4K allows HDMI video equipment supporting up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0), plus Dante audio equipment to be connected and extended to create an independently distributed audio and video network.  The HDMI/Dante over IP PoE Transmitter, UHD-4K allows HDMI video equipment supporting up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0), plus Dante audio equipment to be connected and extended to create an independently distributed audio and video network. 100’s of Single Displays and Video Wall Displays of user configurable size (X by Y) may be supported, depending on network bandwidth. Audio can be independently distributed to 100’s of Dante supported audio devices. Supports HDR at up to 4K @ 30Hz (4:2:2). The unit can be connected via Cat5e/6 cable up to 330ft (100m) from an Ethernet Switch, and supports PoE (PD) when powered by a PoE (PSE) Ethernet Switch. An IR Emitter or IR Sensor, if required, may be purchased separately for IR based remote control applications.