Cart
← Back to Product Catalog

AudioScience – Iyo Dante 32.32MD

I/O Interfaces

More details

Similar Products

TASCAM_-_MM-4D-IN-E
  • TASCAM

TASCAM – MM-4D/IN-E

Built-in DSP 4 mic/line input Dante converter to respond to various needs of contractor market and professional audio scene. Built-in DSP 4 mic/line input Dante converter to respond to various needs of contractor market and professional audio scene. The MM-4D/IN-E is a compact converter that converts 4-channel mic/line input signals into Dante signals. With half the size of a standard 1U rack, the MM-4D/IN-E is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. MM-4D/IN-E supports up to 96kHz/24bit and uses Euroblock connectors for analog mic/line input.  
    I/O Interfaces
  • Dante Ch: 4x4
  • 16-bit, 24-bit
See the product
DIO1600-XLRbr
  • CTP Systems

CTP Systems – DIO1600

The DIO1600 is a Dante enabled interface converting sixteen analogue line level inputs and sixteen analogue line level outputs to the audio network. All inputs and outputs have adjustable gain from +12dB to -12dB. The XLR version may be specified with XLRs on the front, network connections on the rear or XLRs on the rear, network connections on the front. It can also be supplied in a 1RU format with Tascam standard audio connections similar to the DIO1616MA below. Network connections may be copper and/or fibre via two SFPs and the unit includes secondary ports for network redundancy. The DIO1600 is PoE enabled so may be operated without a mains supply if required. The unit also has a 100-240V AC mains inlet and also supports 12 volt operation so may be effectively used with a redundant power supply. All level controls are adjusted using the built in web server. The unit will operate at sample rates of 48kHz and 96kHz and may also be used in AES67 mode.

    I/O Interfaces
  • Dante Ch: 16x16
  • 48kHz-96kHz
See the product
ru-bnfp_400px|ru-bnfp_400px
  • RDL

RDL – RU-BNFP

The RU-BNF is a high quality bi-directional interface that converts three Dante channels to RDL Format-A and one Dante channel to balanced AUX output. It also converts three Format-A pairs and one AUX input to Dante channels. The RU-BNF is compatible with Format-A twisted-pair end-points. Model RU-BNFP operates from PoE. The RU-BNF is a high quality bi-directional interface that converts three Dante channels to RDL Format-A and one Dante channel to a balanced AUX output. It also converts three Format-A pairs and one AUX input to Dante channels. The RU-BNF is compatible with RDL Format-A twisted-pair end-point products. RDL’s Format-A system utilizes the 4 pairs of a standard CATx cable; 3 pairs (pairs A, B and C) are designated for sending and receiving audio and the fourth pair is used to distribute 24 Vdc to connected Format-A products.  The RU-BNF provides signal presence metering and is equipped to power connected Format-A endpoints. The RU-BNF is also available in a PoE version (RU-BNFP). If PoE power and an external 24 Vdc supply are both feeding an RU-BNFP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.
    I/O Interfaces
See the product