Product Information
16 Input and 16 Output Digital Audio Processor, with Dante network transport protocols
Similar Products
- FRENETIK
FRENETIK – Transfer
Allows the conversion and distribution of 4 analog sources on Dante™ network • detachable euroblock input/output connectors • PoE (provided) or 12V power supply (not provided)
Technical data:
Type: Dante™ interface 4x4
Input Connectors: 4 x euroblock
Output Connectors: 4 x euroblock
Audio network connector: RJ45
Input impedance: > 1.8 kohms
Maximum input level: +8 dBu
Output impedance: 200 ohms
Maximum output level: + 20 dBu
Frequency response: 20 Hz - 20 kHz (+/- 1 dB)
THD+N: < 0.02%
Power supply: PoE 802.3 af (provided) or 12 V external (not provided)
Consumption: 10 W max
Dimensions: 52 x 81 x 121 mm
Weight: 357 g
- I/O Interfaces
- Focusrite
Focusrite – RedNet 6
RedNet 6 provides the link between your RedNet Ethernet-based audio system and any MADI / AES10 setup. RedNet 6 supports up to 64 channels of both coaxial and optical MADI interfaces and is completely bi-directional: use RedNet’s high quality interface products with your MADI system – or MADI components with your RedNet system. RedNet 6 features an asynchronous sample rate converter (ASRC) on each input and output so you can interface between MADI and RedNet irrespective of the sample rate at which either system is operating.
- I/O Interfaces
- Sennheiser
Sennheiser – SL MCR DW
The SpeechLine Multi-Channel Receiver with its 10 variants in 2 or 4 channels is the perfect addition to the SpeechLine series. Thanks to its unobtrusive design, the Multi-Channel Receiver can be installed quickly and easily in any room, whether on the wall or ceiling. The device can be operated with a single network cable, thanks to PoE and Dante. Complex analog audio cabling is a thing of the past.
The Multi-Channel Receiver also offers a convenient solution for existing installations. Thanks to an integrated auto mixer and the analog mix output, all audio channels can be used simply as a sum signal. The audio mix is also available digitally via Dante, which allows an extension of the existing setup without exchanging the DSP.
Due to the bidirectional communication between receiver and transmitter, all settings of the mobile transmitters can easily be made in the Sennheiser Control Cockpit. The receiver’s automatic frequency management eliminates the need for manual frequency settings and the automatic interference management guarantees maximum transmission reliability.
The user-friendly pairing function ensures a reliable connection between transmitter and receiver. Network integration also makes it possible to remotely control and monitor the receiver via a media control system (e.g. AMX, Crestron). Due to the integrated antennas, a complex antenna installation is no longer necessary.
Features
- Automatic Gain Control
- Automatic Frequency management
- AES 256 encryption
- 2-port Dante
- PoE
- Analog Mix Output
- One status LED per Link
- Remote control via Control Cockpit or media control
- Wall, ceiling or mic stand mounting
- Integrated Automixer
The SL MCR DW comes in 10 variants
- SL MCR 2 DW-3 (2 channel EU)
- SL MCR 2 DW-4 (2 channel US)
- SL MCR 2 DW-5 (2 channel Japan)
- SL MCR 2 DW-6 (2 channel Taiwan)
- SL MCR 2 DW-7 (2 channel Brazil)
- SL MCR 4 DW-3 (4 channel EU)
- SL MCR 4 DW-4 (4 channel US)
- SL MCR 4 DW-5 (4 channel Japan)
- SL MCR 4 DW-6 (4 channel Taiwan)
- SL MCR 4 DW-7 (4 channel Brazil)
- I/O Interfaces