Sennheiser – SL MCR DW


More details

Similar Products

Dante官网logo
  • BARE

BARE – DT-1

The D series converter box is compatible with all Dante interfaces and has all the features of Dante audio network. Each conversion box can provide high-fidelity sound quality restoration, ultra-low latency, and accurate synchronization of sampling rates across the entire network. Compact design, easy to use, plug and play; conversion between analog audio signals and Dante digital audio signals; expand audio and power through a network cable; fully support Dante software, easy to configure the network and audio routing; support PoE power supply, Built-in lightning and surge protection.
    I/O Interfaces
0114735_unterputzanschluss-mit-35mm-klinkenbuchse-out
  • promedias

promedias – proDT 3.5O UP

Flush-mounted connection with 3.5mm jack output from Dante, EDIZIOdue

  • AES67 & DDM ready!
  • 0x2 LINE OUT (3.5mm Stereo female)
  • PoE / 5VDC Input
  • Stereo L+R DANTE® Broadway
  • Sample Rate: max. 192kHz | Latency: min. 0.25ms
  • Network Speed: 1Gb/s / 100Mb/s
  • Dimensions: Gr. I (1x1) - 88x88x53mm bzw. 50mm
  • Installation dimensions: Ø64x44mm bzw. Ø60x44mm (cutout x depth)
  • Color: white (Feller 61), similar to RAL 9010 (also available as standard, e.g. black 60 or option RAL/NCS colour!)
    I/O Interfaces
symetrix-xIn-4_1200px|symetrix-xIn-4_1200px
  • Symetrix

Symetrix – xIn 4

The cost effective xIn 4 increases a system’s analog input channel capacity resulting in a reduction in overall price per channel.  The cost effective xIn 4 increases a system’s analog input channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Dante-enabled Symetrix DSP units, each of the four analog inputs’ parameters (5 gain levels, phantom power), along with bus assignments, are configured using Symetrix Composer open architecture software. xIn 4 set up is logical and fast with no requirement to use third party software; there are no mechanical switches or circuit board jumpers to set. Systems are simpler, cost less, and have fewer potential points of failure. A half-rack form factor conserves rack space, or, if preferred, the xIn 4 may be surface mounted. Features
  • Audio input (A/D) expander for systems that capitalizes on the surplus DSP of a Dante-enabled Symetrix DSP unit to bring overall system
  • costs down.
  • 4 mic/line inputs, including +48 VDC phantom power, with the industry leading performance specifications of Edge and Radius.
  • Configured with Symetrix Composer. No third party software, archaic DIP switches, or complicated front panel menus.
  • Network audio expansion using Dante protocol over standard IT networks. Ultra low latency.
  • Rack mount and surface mount kits sold separately.
    I/O Interfaces
  • Dante Ch: 4x4
  • 24-bit