Dante-enabled Product Catalog

The AV-LN4 is an interface that converts four line-level XLR inputs to Dante network audio channels. Special software is not required to configure the AV-LN4. A dual-LED VU meter displays the level for each. The AV-LN4 is a professional grade product for studio quality fidelity and low noise performance.

The AV-LN4 may be powered from an external 24 Vdc power supply, available separately. The AV-LN4 is equipped to operate from a PoE enabled network switch. The AV-LN4 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an AV-LN4, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. Valid power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.

The AV-LN4 is constructed in a durable, professional all-metal enclosure suitable for use on stage or in studio, or mounted to any flat surface. For fixed installations, mounting brackets are included. The chassis is designed to protect the front panel slide switches from accidental damage. This full-featured AV-PAK product is engineered and manufactured in the U.S.A for continuous duty in demanding installations.

After the Release of the «Digital Patchbay 1132 Dante» in September last year, we are now proud to release the next generation of Ghielmetti device.

The new Digital Patchbay GDP 1232 Dante, goes now full Digital.

As in its analog version, this AES3 version offers you again efficiently the possibility to connect the “old world” with the “new world”. Thanks to the new GDP 1232 Dante, you can patch your Dante signals, add effortless 16 AES3 inputs to your Dante network or extract 16 Dante channels as AES3 outputs, just by simple patching.

The GDP 1232 Dante is not only a patching solution as it enable you also to mix all signals.

These newly mixed signals are then available to be fed into your Dante network. Through its front display and navigation knobs, there is no need for a Dante Controller.

Furthermore, Monitoring, mixing and setting can be made either from the front display or via a remote web browser. The GDP 1232 Dante is a 19”, 1 RU device, its assembly depth is 220 mm, which make it very interesting for integration in tight spaces.

"Give your people the power to perform, with the flexibility of BYOM and the quality of an installed room system. Gio USB is a surface-mount USB-to-Dante endpoint, designed to bridge the gap between IT and AV by allowing connection of laptops and room PCs to a networked AV system. 
Supporting hybrid work and BYOM, Gio USB offers driverless compatibility with leading soft-codec platforms, including two-way volume and mute sync for Microsoft Teams, allowing control of room audio over HID. Easy to install with a single CatX cable and PoE to IEEE 802.3af, Gio USB mounts discreetly for flexible positioning near the room PC or conference table."

True connection unlocks the power of possibilities. With Gio XLR, proprietary analog audio products can be connected into an installed network for centralised management, routing and control. Leveraging Dante audio-over-IP technology, Gio XLR is a dual-gang in-wall endpoint with a single cable installation for both power and data. It offers a 2×2 input/output combination with mic/line switching and software-selected 48V Phantom power, making Gio XLR a versatile bridge between audio and IT.

"Extend your networked AV system to BYOD devices, with the Gio Bluetooth® in-wall module. Leveraging the extended range and exceptional quality of Bluetooth 5.0 Class 2 technology, Gio Bluetooth connects personal peripherals such as smartphones, iPads and laptops to an in-room AV system with IT management functionality. Gio Bluetooth installs into a single-gang with just one CatX cable for both power and data, and offers installer-configurable device naming, PIN security and advanced pairing options.
Optimized for conferencing, Gio Bluetooth enables room users to pair their cellphone with the installed AV system offering two-way audio that can benefit from HearClear™ AEC, voice-lift, and noise reduction technologies¹. With configurable functionality including priority pair and auto-disconnection to prevent accidental pairing in busy office facilities, Gio Bluetooth is ideal for the enterprise. Its connectivity state can be controlled remotely through XTouch touchscreens and third-party systems² such as Crestron®, AMX®."

4 Balanced In, Analog Audio to Dante & 4 Balanced Out, Dante to Analog Audio

• Adjustable phantom power from +0V to +48V.
• Easily route audio with 3rd party units in the Dante network.
• May be powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af)

4 Balanced In, Analog Audio to Dante & 4 Balanced Out, Dante to Analog Audio

• Adjustable phantom power from +0V to +48V.
• Easily route audio with 3rd party units in the Dante network.
• May be powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af)

> CAT5/6 connector to link with Dante network and controlled by Audinate;
> Small size integrated mounting bracket which can be installed in very limited space;
> Adopt advanced V5.0 Bluetooth technology;
> Simple to pair Bluetooth by pressing a button;
> Compatible with a variety of mobile phones, tablets, computers and other devices;
> With RCA and 3.5mm TRS stereo input, TRS priority;
> With one 3.5mm TRS stereo output;
> Support PoE power supply;
> Integrated power supply and audio transmission in one body;
> With Bluetooth call bridge function for conference purposes.
> Convert 1 Bluetooth Audio signal to 2 Dante network audio channel;
> Convert 1 aux or 3.5 jack stereo to 2 Dante network audio channel.
> Receiving Dante network audio signal via local 3.5 jack.

The RedNet D16R MkII is a 16-channel bi-directional AES3 interface for Dante® networks. The 1U rackmount device features individual input and output channel level controls, allowing for precise calibration and control of all input and output levels using RedNet Control. RedNet D16R MkII features power supply and Ethernet redundancy with auto switchover in case of failure.

Various connection options make RedNet D16R MkII a flexible addition to any Audio-over-IP system. A pair of DB25 multipin connectors each connect eight channels of AES3 I/O into and out of the interface, while XLR and RCA ports enable two-channel AES3 and S/PDIF connections, respectively, to be made.

Sample rate conversion on every input enables external equipment to operate at different sample rates, and DARS signals are accepted on the XLR connector. Word Clock I/O on BNC connectors allows synchronisation to house clock, or syncing external equipment to the Dante network.

The MXCWAPT Access Point Transceiver manages audio routing, frequency coordination, and system control for up to 125 wireless conference units. The MXCWAPT automatically selects the clearest channel in the 2.4 GHz and 5 GHz frequency bands and switches channels to avoid potential interference. The access point provides both Dante™ and analog audio inputs and outputs, and uses a single Ethernet connection for power, audio, and control.

The Quicklink TX Quad will allow you to easily manage 4 simultaneous incoming Skype/Microsoft Teams calls to be processed as 4 SDI or NDI™ outputs in one single unit. A high availability option is available on this unit for full redundancy and resilience.

Product Highlights

Manage 4 incoming Skype/Teams calls to 4 SDI outputs

4 professional SD/HD SDI input & outputs

Supports both I/O for NDI™

High Availability Option including Dual Power Supply & Raided drives

Skype TX controller software with control console

Ultra low delay: For instantaneous 2 way video/audio contributions

Video and audio free from adverts

Aspect ratio correction method: Scale your SDI input picture to your requested resolution

Customisable tally or information graphic overlay back to return caller

Talkback: Switch between 3 different audio sources

Screen sharing capability

Auto-Answer function

Embedded SDI audio (16 Channel in hardware)

AES balanced audio (additonal hardware required)

Remote Management Ethernet Port for bare metal restore

HD Recording Function

Free complimentary technical information via the Customer Portal

Millennia’s G­­ōzowta converts from Dante audio over Ethernet to high resolution analog at sample rates up to 96 kHz.

The DA-296 connects any two channels of Dante to your analog gear. Power amps, stage monitor systems, powered speakers and more.

The G­­ōzowta also has 1/4 and 1/8 inch headphone jacks with a level control so it can be used as part of a personal monitor system or for trouble shooting Dante audio streams.

Outputs include balanced XLR and Phoenix-style output connectors. Power is supplied by the Ethernet cable from PoE (power over Ethernet) enabled switches or in-line PoE injectors.

There is a -10dBV/+4dBu output reference level switch to accommodate most analog equipment

Housed in a rugged 1/3 rack width chassis, the G­­ōzowta is the same size as Millennia’s portable preamp series. It can also be bolted to a Mid Atlantic rack tray.

The TASCAM BO-32DE is a rugged, rackmounted audio adaptor designed for professional installation. 32 front-panel Eruoblock connectors are internally bridged to four D-Sub output connectors on the rear panel, providing fast and easy I/O and interconnectivity between CD players, Digital Audio players, Mic Preams, Zone Mixers, Distribution Amplifiers Audio over IP Convertors and more.

The 1544ZOP 4x4 Smart Zone Output Processor provides all the network audio routing and zone digital signal processing functions of a DNA2404D integrated network amplifier unit. This includes Dante® network audio input, equalization, level control, andAtlasIED’s patented AlwaysHEAR™smart ambient analysis automatic level adjustment. AlwaysHEAR™. ensures the audio levels are automatically adjusted to always be set at the perfect sound level. The 1544ZOP provides four line-level balanced analog audio outputs for driving external amplifiers or powered line arrays. The 1544ZOP integrates with AtlasIED’s GLOBALCOM®.IP announcement controller, or may be used in stand-alone applications. Optionally, the processed zone output audio may be routed back out over the network as Dante digital audio.

In addition to the four zone outputs, the 1544ZOP has four balanced line-level analog inputs that may be used as automated test inputs associated with the four zone outputs. Alternately, the analog inputs may be routed out over the network as Dante digital audio for such uses as for background music or auxiliary audio sources.

The 1544ZOP also provides eight (8) logic inputs. Four of the inputs are standard closure detection and four are supervision capable, which provides the additional means to detect open or short conditions on the incoming links.

Inputs are provided for connecting up to eight (8) 540S ambient noise sensors (2 sensors for each output channel). This allows the output of each channel to be automatically adjusted in real time based on the measured ambient noise level in the zone.

The 1544ZOP may be configured from the GLOBALCOM.IP System Management Center (SMC) or via the open-standard SNMP (Simple Network Management Protocol).

TheAtlasIED1544AIO-D is a 4-input (2 flow) x 4-output (2 flow) mic / line level analog pre-amplifier that converts analog audio signals to Dante® network

audio. Multiple channels of Dante® network audio can be transported over standard IP networks. TheAtlasIED1544AIO-D 4x4 Dante® I/O Module features four analog balanced mic or line inputs (selectable) and four balanced line outputs. The four analog inputs are converted into Dante® network audio and can be routed via Dante Controller™. The four outputs convert Dante® digital audio received over the LAN into analog audio. There are indicators for network connection, network audio traffic, and power. Each input can be selected to Line or Mic level. In Mic mode, each input has 3 gain selections with Phantom Power. TheAtlasIED1544AIO-D requires no external power supply. It is powered via a network PoE port or a PoE injector.

Video: HDMI v2.0 and HDCP 2.0

Supported resolution: 4096 x 2160 /60P (4:4:4)；

Supports wiring of up to 8 HDMI embedded LPCM digital audio channels, as well as 24bit,192kHz sampling frequency for each sample.

Supports transmission of embedded HBR audio formats: such as Dolby digital true HD and DTS-HD Master Audio.

IP network-based audio, supports transmission of network-based audio via switches

2 * USB ports, supports KVM function

IR Control: Supports bidirectional IR transmission

RS-232 Control: supports bidirectional RS-232 transmission, up to 115,200 baud

HDMI input 1 * 19-pin female HDMI interface

Analog stereo audio: 1 * 3.5mm stereo-mini jack

10GbE and 1GbE ports: 2 * shielding RJ45 interface and LED indicator light

1 * IR input: 3.5mm stereo mini jack

Maximum pixel clock frequency: supports pixel clock frequency up to 594MHz

Switching Plane: independent switching planes supported I/O switch arrays of all connected videos, audios, RS-232 and IR signals

Network audio interface with Dante (AES67 compliant)

16 x analogue inputs (mic/line)

16 x analogue outputs

8 x AES3 inputs (up to 192kHz)

8 x AES3 outputs

16 network remote controllable mic amps

Windows 10 App for remote control

Redundant network links (both copper & fibre)

Redundant power supplies

19 Inch 1RU

PEAI-9088 provides for analog or AES3 digital audio transmission over local network (AoIP) via Dante or AES67 protocol. 100/1000Mbps Ethernet supported. Up to sixteen analog (balanced) audio channels (8 in, 8 out) or eight AES3 signals (4 in, 4 out). Audio formats supported are denoted by the XXYY model index: XX designate the input format (A - analog stereo pair, E - two AES3 channels), YY designate the outputs formats in the same way. Auxiliary Ethernet port provides redundant network connectivity. Capability of Ethernet SFP provides an optical connectivity (SFP module sold separately). Configuration and monitoring is made with a dedicated Dante Controller software package over Ethernet. Separate mains connectors for the main and stand-by PSUs. Hot-swappable PSU.

Since 1946, Switchcraft

products have been known for their durability, and this new Dante box

combines that approach with the latest Dante technology. Rugged rubber

corners protect the Switchcraft XLRs outside and high quality electronics inside

while maintaining a compact and lightweight form factor.

This device is a public address controller that can be controlled through a TCP/IP network.

Operation and operation are easy with the 10.1-inch piezoelectric touch panel drive.

12IN 8OUT Mixer function is built-in, and it receives 4 external inputs at the same time and

converts it into a total of 12 digital sound sources and outputs them.

DANTE SOLUTION-based uncompressed sound source transmission method is adopted, so there is no delay in

sound , and high-quality sound beyond CD quality is guaranteed.

6IN, 4OUT gate contact is built-in, so contact input/output is possible.

5 10/100/1000 LAN ports and 2 MULTI MODE optical ports are available.

The inclusion of the Quicklink TX transceiver to your workflow is a cost effective option. It ensures the broadcasting of HD quality Skype and Microsoft Teams video calls in a fully controlled manner.

Accessibility

Be first on the scene to broadcast the latest breaking news. Create authentic content with real-time access to contributors

Connect with multiple remote Skype & Teams users, anywhere, anytime

Reach Skype & Teams users on any video-enable device

Cost Effective

Free Skype TX controller software download

Global live contributor reach event for small production companies

Reduced need for complex cabling

No need for extra equipment thanks to the automatic aspect ratio conversion and balanced audio

No need for satellite trucks and associated hardware

Optimisation

Flexible integration into established workflows with SDI and HDMI input/output

Simple central control and management of multiple calls with Skype TX controller

Technical data from the calls optimise both calls quality and user experience

Professional solution which does not compromise the video and audio call quality

Automatic fall back to a still image if the video quality drops below a certain threshold and switches back to video once the network conditions improve

The MXWAPT is a 4-channel wireless access point compatible with Microflex Wireless microphone systems. It uses automated frequency coordination to assign clean frequencies to wireless microphones and manages two-way wireless transmission of encrypted audio and control signals. Power to the unit (via PoE) and Dante digital networked audio are both supplied over a single Ethernet cable to simplify installation, and the supplied mounting plate and paintable cover allow discreet placement in boardrooms and conference rooms where low visibility is preferred.

Axient Digital offers dual and quad receiver options that open the door to a full range of features, from high-performance RF to transparent digital audio.

The AD4D Two-Channel Digital Receiver sets a new standard in spectral efficiency. Groundbreaking performance features include wide tuning, low latency, and High Density (HD) mode, ensuring solid performance in the most challenging RF environments. Networked control and signal routing options bring a new level of management and flexibility to your entire workflow.

Higher channel density with maximum signal reliability at the same time: Digital 6000 is intermodulation-free and assures through its equidistant frequency grid excellent spectral efficiency and the simplest frequency configuration– even in the toughest frequency environments where other systems already fail. Error correction and audio error masking recognize and fix problems long before they even become audible. When it comes to setup and the user interface, the EM 6000 stands out for clarity, relevance and short pathways.

Digital 6000 can be seamlessly integrated into existing digital or analog infrastructures. The EM 6000 receiver has a digital AES-3 output with word clock inputs and outputs, high-quality transformer-balanced analog XLR and 6.3 mm jack outputs as well as a 6.3 mm headphone output. The Dante™ version with an Audinate Brooklyn ll card additionally offers two Amphenol RJ-45 connectors for integrating the receiver into a Dante™ network, for redundant networks or daisy chain cabling.

Whether we’re talking about reducing information down to the really meaningful key values or smart menus on a high-contrast OLED display, every operating element is a result of practical experience and designed for practical use. All the vital parameters are summarized in one view. Important functions can be reached directly via home screens without long navigation paths. The auto-setup enables scanning and frequency distribution to all connected devices directly via the receiver; naturally Digital 6000 can also be monitored and configured via the Wireless System Manager (WSM).

The EM 6000 is compatible with UHF Sennheiser antenna systems.

The MXWAPT is a 8-channel wireless access point compatible with Microflex Wireless microphone systems. It uses automated frequency coordination to assign clean frequencies to wireless microphones and manages two-way wireless transmission of encrypted audio and control signals. Power to the unit (via PoE) and Dante digital networked audio are both supplied over a single Ethernet cable to simplify installation, and the supplied mounting plate and paintable cover allow discreet placement in boardrooms and conference rooms where low visibility is preferred.

The MXWAPT is a 2-channel wireless access point compatible with Microflex Wireless microphone systems. It uses automated frequency coordination to assign clean frequencies to wireless microphones and manages two-way wireless transmission of encrypted audio and control signals. Power to the unit (via PoE) and Dante digital networked audio are both supplied over a single Ethernet cable to simplify installation, and the supplied mounting plate and paintable cover allow discreet placement in boardrooms and conference rooms where low visibility is preferred.

DPanel 系列墙面接口机，其拥有模拟输入和 Dante 数字输入，模拟线路输出和 Dante 数字输出，模拟输入支持幻象供电以及手动前级增益调节。