Cart
← Back to Product Catalog

Glensound – DARK1616M

I/O Interfaces

More details

Similar Products

24e8ec993ef49ab61859625561a6fa7b
  • Lectrosonics

Lectrosonics – M2T

The M2T half-rack transmitter houses two stereo transmitters to provide two stereo audio channels, and for up to four mono audio channels in a single rack space. The audio inputs can be individually configured to be analog or Dante compatible. The analog input connectors are full-size XLR/TRS combo types for balanced line-level analog signals while the input preamp circuits use a special balanced amplifier with very high common mode rejection to minimize hum and noise.

A Dante™ Ultimo™ interface via dual RJ45 connectors accepts Dante networked audio inputs and can daisy chain the digital stream to additional units via CAT6 cables. An additional RJ45 jack provides an Ethernet connection for programming and control via Wireless Designer™ software and a USB jack on the front panel allows for firmware updates. The transmitter features a full color, backlit LCD for high visibility in any environment, while the chassis is all-metal and can be racked singly or in pairs using included rack mount hardware. 

    I/O Interfaces
  • Dante Ch: 4x4
  • 24-bit
See the product
yamaha-swr2100p_5g_1200px
  • Yamaha

Yamaha – SWR2100P-5G

Complex network switch setup that was previously better left to an IT technician can now be easily accomplished by anyone. A simple switch setting is all it takes to optimize SWP1 series network switches for Dante operation, and a dedicated Windows application provides “network visibility” for comprehensive monitoring and control. Yamaha has used its knowledge of both IT and pro audio to provide "SWR2100P series" simple L2 switch that has been optimized for networked audio installations. The switch can take advantage of "Yamaha LAN Monitor" a dedicated Windows application that provides 'network visibility' for comprehensive monitoring and control. The "SWR2100P series” which are simple L2 switches can supply power as well as audio and control signals to a PoE-compliant Dante device such as the paging station microphone “PGM1” through just one Ethernet cable. Since the power supply and the network wiring can be combined, the number of cables being used can be reduced, and the connection distance can be extended, so the degree of freedom of Dante device installation is increased and construction flexibility is further improved. Systems built around the SWR2100P-5G or SWR2100P-10G L2 switches allow comprehensive network monitoring from the dedicated Yamaha LAN Monitor software application, with PoE power status monitoring and ON/OFF switching capability. Understanding how multiple switches installed in different locations are connected, plus how network devices are connected to those switches, can be a difficult, time-consuming task. The Yamaha LAN Monitor makes overall network topology clearly visible, giving the user a comprehensive overview of how multiple switches and Dante network devices are interconnected. Simply connect a Windows PC to the nearest SWR2100P series switch and launch the Yamaha LAN Monitor software. You can take a “snapshot” of the network status when set up as required. The software can then automatically keep track of the settings and alert you to any changes. You could take a snapshot of the network, and then you would be alerted if a cable is disconnected, if a device is turned off, or if a wrong connection is made prior to the performance, for example. Identifying devices connected to a switch by only their IP or MAC address is a difficult and error-prone approach. Connected Dante devices are identified by a Dante icon as well as a device ID previously set up via the Dante Controller software. You can also enter additional info, such as the location of the device, in the Label and Comment fields. If the monitoring device does not respond to a Ping, it judges that a fault has occurred and automatically stops the PoE power supply to that device and then resumes it. This restarts the monitoring equipment and attempts recovery. By collectively managing the status of the devices distributed over a wide area, it can ensure that equipment management can operate far more smoothly.
    I/O Interfaces
See the product
RedNet2_Chassis|RedNet2_Chassis
  • Focusrite

Focusrite – RedNet 2 Native 16×16 I/O System

RedNet Native 16x16 Analog I/O System is the easiest way to add world class conversion to your DAW, whether you use Cubase, Nuendo, Logic, Pro Tools software, or other DAW for Mac or PC. Comprising RedNet 2, RedNet PCIe, Sonnet Echo Express SE I Thunderbolt chassis and a preconfigured Ethernet switch, this package includes everything you need to get started. Just add computer and DAW software. With dynamic range of 119dB and incredibly low distortion, the RedNet converters will deliver pristine results every time whether tracking or mixing. RedNet PCIe provides true analog-round-trip latency of just 2.0ms at 96kHz allowing cue-mixes to be set up in the DAW software rather than a separate cue mix application. What's Included
  • RedNet 2 – 16 Channel AD/DA Converter
  • RedNet PCIe Card – 128 Channel I/O
  • Sonnet Echo Express SE I
  • Cisco SG200-08 8-port Gigabit Smart Switch – Pre-Configured (limited time offer)
Software available upon registration:
  • Focusrite Red 2 & Red 3 Plug in Suite
  • Dante Virtual Soundcard
Find a Dealer
    I/O Interfaces
See the product