Cart
← Back to Product Catalog

Danacoid – DN-210RXC

I/O Interfaces

More details

Similar Products

DIF440|kingray-DIF440_1200px|kingray-DIF440_1200px
  • Kingray

Kingray – DIF440

DIF440 is based on the international general agreement with 4 in 4 out audio interface of Dante and based on Dante Ultimo latest chip solutions, can realize the analog audio signal access, converted to digital audio signal by Dante protocol access to any Dante audio transmission network equipment, realize high quality, long distance, the transmission properties of low latency, and to ensure that the audio signal is the most real reduction.
  • 4 analog input 4 analog output (balanced) for line / microphone level
  • Support the microphone sensitivity adjustment
  • 48V phantom power
  • 115 dB(A) dynamic range
  • 2 analog outputs
  • Support for 96k and 48k signal transmission 12V power supply
    I/O Interfaces
See the product
Dante官网logo
  • BARE

BARE – D-10D

Features： 1. PoE power supply; 2. Soft key-type user switch to avoid mechanical sound when switching the microphone; 3. The entire expandable Dante system has 512 two-way audio channels; 4. Use a network cable to connect to the switch; 5. There are a variety of switch modes to choose from, a variety of gains are available, and a low-cut switch; 6. Equipped with a 3-pin XLRF canon female socket, suitable for quick installation of any XLRM canon male output gooseneck microphone; The sturdy casing cast by die casting and the non-slip silicon foam at the bottom of the microphone holder can reduce the impact of desktop vibration on the microphone.
    I/O Interfaces
See the product
Vittoria 64 DR
  • Glensound

Vittoria 64 DR

The Vittoria provides a bridge between two internal and separate Dante and  Ravenna networks. These networks are completely isolated from each other with 100% network security, providing a complete network firewall. Vittoria links 64 channels from each network directly in DSP, allowing the passing of bi-directional audio but with complete isolation and security from each separate network. As each network is isolated, they can operate asynchronously and at different sample rates from each other without any problems. Each network can operate at sample rates from 44.1 kHz up to 96kHz. Features:
  • Provides a firewall between a Dante & Ravenna network interface
  • Acts as a bridge bi-directionally with Dante and AES67/Ravenna Networks
  • Acts as an interface between Dante and full SMPTE ST2110-30
  • 64 input and output channels at sample rates up to 48kHz
  • 32 input and output channels at sample rates up to 96kHz
  • The two networks can operate asynchronously or at different sample rates
  • Support for 44.1-96kHz
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
See the product