Cart
← Back to Product Catalog

Shure – MXWAPT4

I/O Interfaces

More details

Similar Products

arista-ars-3232
  • Arista

Arista – ARS-3232

E-Vocal MYRIAD are multiple channel analog input and analog output Dante converters. There are two models that make up the E-Vocal MYRIAD product:

  • ARS-1616
  • ARS-3232

These models are 1U rack mount analogue converters designed to transfer 16 or 32 analogue audio channels over a Dante network in both directions. Space-saving 25-pin D-sub connectors are provided for use with optional breakout boxes to input and output balanced line-level analogue audio signals. Two etherCON connectors (Dante Primary/Secondary) are available for redundant operation using two separate networks. For high availability operation requirements, dual AC input and dual PoE power sources are available for redundant operation. The units feature indicators for operation status and current sample rate as well as overload LEDs for each input and signal LEDs for each input and output. Any other settings, such as sampling frequency, channel routing or latency, can be made by the free “Dante Controller” computer application. The sampling frequency, power source status, will be displayed on the 2×20 character display located on front bezel. More info: https://www.aristaproav.com/product/myriad/

    I/O Interfaces
See the product
ssl-bl-II-bridge
  • Solid State Logic

SSL – BL II-Bridge

For fixed installations where ruggedised connections are not required, the BL II Bridge also offers 256 channels of 96 kHz audio between a Live console and a Dante network by utilising SSL’s proprietary high bandwidth Blacklight II protocol. For fixed installations where ruggedised connections are not required, the BL II Bridge also offers 256 channels of 96 kHz audio between a Live console and a Dante network by utilising SSL’s proprietary high bandwidth Blacklight II protocol.
    I/O Interfaces
  • Dante Ch: 256x256
  • 24-bit
See the product
arrakis-systems-Simple_IP_1200px
  • Arrakis Systems

Arrakis Systems – Simple IP 8A

Simple-IP is a one rack unit AoIP box with 8 mono inputs and 8 outputs (or 4 by 4 stereo pairs). The digital version of Simple IP uses XLR AES3 connectors, that allow you to connect your digital audio equipment.  AES67 compliant, it is excellent to use with any existing Dante or AES67 network. Simple-IP is a one rack unit AoIP box with 8 mono inputs and 8 outputs (or 4 by 4 stereo pairs). Available in 2 models: analog & AES digital. The digital version of Simple IP uses XLR AES3 connectors, that allow you to connect your digital audio equipment. Uses standard off the shelf ethernet switches’ for connectivity. And uses the world standard DANTE ethernet AoIP protocol. Connect to products from more than 300 manufacturers. From mics to speakers to mixers. Using the world standard DANTE ethernet audio protocol, Arrakis has built the first cost effective ethernet audio networking solution for the average radio broadcaster and professional AV installer. It replaces the multipair cables that distribute audio around your facility with a single CAT5e ethernet cable. With its AES-67 interface, Simple-IP can even send and receive streams from other non-DANTE AoIP networks. Put one in each room and one or more in your central equipment room, then run CAT5e ethernet cable and your audio routing is done. Product demo: https://youtu.be/jAymqlc5lmo
    I/O Interfaces
See the product