Shure - AD4D

Shure – AD4D

Product Information

Axient Digital offers dual and quad receiver options that open the door to a full range of features, from high-performance RF to transparent digital audio.

The AD4D Two-Channel Digital Receiver sets a new standard in spectral efficiency. Groundbreaking performance features include wide tuning, low latency, and High Density (HD) mode, ensuring solid performance in the most challenging RF environments. Networked control and signal routing options bring a new level of management and flexibility to your entire workflow.

Specifications

Bit Depth: 24-bit
Sample Rate: 48kHz, 96kHz
AES67 Enabled

Micromedia – Digimedia HPA Pro

Digimedia HPA Pro is a 2 channel Dante™ interface with analog headphone output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB and a high class amplifier with up to S/N 120dB. There is Dante Domain Manager and AES67 support build in. Digimedia HPA Pro is a 2 channel Dante™ interface with analog headphone output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB and a high class amplifier with up to S/N 120dB. There is Dante Domain Manager and AES67 support build in.

I/O Interfaces

See the product

0119852_unterputzanschluss-mit-bluetooth-input-und-2x_230

promedias

promedias – proDT BI/CI UP

AES67 & DDM ready! 4x0 LINE IN (Bluetooth/Cinch Stereo female) PoE / 5VDC Input Stereo L+R DANTE® Broadway Sample Rate: max. 192kHz | Latency: min. 0.25ms Network Speed: 1Gb/s / 100Mb/s Dimensionen: Gr. I+I (1x2/2x1) - 148x88x59mm bzw. 50mm Einbaumasse: 120x67x44mm bzw. 120x60x44mm (Ausschnitt x Tiefe) Farbe: Weiss (Feller 61), ähnlich RAL 9010 (auch als Standard Schwarz 60 oder Option RAL/NCS Farbton erhältlich!)

I/O Interfaces

See the product

Bose Professional

Bose – ControlSpace EP40-D

The Bose® ControlSpace® EP40-D 4-input Dante endpoint adds 4 mic/line inputs to a Dante-based network audio system. Front-panel indicators show channel gain/pad and phantom power status for easy troubleshooting. The ControlSpace EP40-D 4 input Dante endpoint is the ideal interface for adding mic/line inputs to a Dante system. The small form factor of the EP40-D allows it to be mounted almost anywhere, putting it close to audio sources and minimizing interference-prone analog wiring. The EP40-D features four balanced mic/line inputs, each with software selectable +48V phantom power and 8 gain levels. Front panel indicators show each channel’s gain and phantom power status for easy troubleshooting. The EP40-D has two network connections to allow Dante daisy chaining. Dante daisy-chaining further simplifies system infrastructure wiring by allowing multiple EP40-Ds to use a single CAT-5 home run connection to a network switch. Power can also be daisy chained. The EP40-D is powered by either an external +24VDC supply or any PoE network switch. Setup and control, including like mic/line input

I/O Interfaces

See the product

Shure – AD4D

Product Information

Specifications

Similar Products

Micromedia – Digimedia HPA Pro

promedias – proDT BI/CI UP

Bose – ControlSpace EP40-D

Stay connected to Dante

Support

Company

Dante Networking Alliance