Product Information
The LAX M0808N is a digital audio media matrix equipped with 8 channels of analog audio input/output, as well as 8 Dante network enabled inputs/outputs.
Similar Products
- infobit
iTrans DX-22-EUK
Infobit has debuted its new XLR Dante wallplate- iTrans DX-22-EUK.
FEATURES:
· 2x Inputs + 2x Outputs (Dante® in and Dante® out)
· Balanced/unbalanced XLR analog audio
· MIC Phantom 48V Power and on/off via a hard button
· Input sensitivity and output gain control to adjust for different levels of MIC/XLR
· Dante® audio sampling rate supports 44.1/48/88.2/96KHz@24bit
· Configurable Dante® device latency (supports 1, ,2 or 5ms configurable using Dante® Controller)
· Supports AES67 RTP audio transport
· EU and UK versions all-in-one design
· With a magnetic cover, easy to install.
· PoE & local power options
- I/O Interfaces
- Dante Ch: 2x2
- 16-bit, 24-bit
- AtlasIED
AtlasIED – IED1544ZOP
The 1544ZOP 4x4 Smart Zone Output Processor provides all the network audio routing and zone digital signal processing functions of a DNA2404D integrated network amplifier unit. This includes Dante® network audio input, equalization, level control, andAtlasIED’s patented AlwaysHEAR™smart ambient analysis automatic level adjustment. AlwaysHEAR™. ensures the audio levels are automatically adjusted to always be set at the perfect sound level. The 1544ZOP provides four line-level balanced analog audio outputs for driving external amplifiers or powered line arrays. The 1544ZOP integrates with AtlasIED’s GLOBALCOM®.IP announcement controller, or may be used in stand-alone applications. Optionally, the processed zone output audio may be routed back out over the network as Dante digital audio.
In addition to the four zone outputs, the 1544ZOP has four balanced line-level analog inputs that may be used as automated test inputs associated with the four zone outputs. Alternately, the analog inputs may be routed out over the network as Dante digital audio for such uses as for background music or auxiliary audio sources.
The 1544ZOP also provides eight (8) logic inputs. Four of the inputs are standard closure detection and four are supervision capable, which provides the additional means to detect open or short conditions on the incoming links.
Inputs are provided for connecting up to eight (8) 540S ambient noise sensors (2 sensors for each output channel). This allows the output of each channel to be automatically adjusted in real time based on the measured ambient noise level in the zone.
The 1544ZOP may be configured from the GLOBALCOM.IP System Management Center (SMC) or via the open-standard SNMP (Simple Network Management Protocol).
- I/O Interfaces
- Dante Ch: 4x4
- 24-bit
- AudioScience
AudioScience – Iyo Dante 8.8LR
The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 8.8LR provides 8x8 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu. With RJ-45/StudioHub + GPIO Connector close-up.
RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.
The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.
Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.
- I/O Interfaces
- Dante Ch: 8x8
- 16-bit, 24-bit, 32-bit