Shure – MXWAPT2


More details

Similar Products

Ecler - WP22DN
  • Ecler NEEC Audio Barcelona

Ecler – WP22DN

WP22DN is a wall panel interface with Dante™ and AES67 digital audio transport protocols compatibility.

It features 2 audio MIC/LINE Combo connector inputs in its frontal panel and 2 Dante™ conversion channels either directly or by the sum of the analogue inputs channels (stereo to mono conversion). Also, it features 2 analogue outputs with duplicated connectors in XLR format for the front panel and Euroblock on the rear panel, both linked to 2 Dante™ channels coming from the local network. It supports PoE supply or local power supply.

    I/O Interfaces
  • Dante Ch: 2x2
  • 24-bit
WP22BUD_170x170|WP22BUD_170x170
  • Bose Professional

Bose – ControlSpace WP22BU-D

The ControlSpace WP22BU-D Dante wall plate is a cost effective multi-I/O wall box. The WP22BU-D features a balanced mic/line XLR input and a balanced XLR line output. Two RCA line-level inputs and a 3.5mm TRS line-level input complete the available inputs. A 3.5mm TRS line-level output is also included. The WP22BU-D is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT-5 cable. The size of the WP22BU-D and I/O density make it easy to put Dante connectivity wherever it’s needed—near the audio source or sink—thereby eliminating costly and interference-prone analog wiring. Setup and control, including like mic/line input gain, balanced/unbalanced source selection, and phantom power, as well as Dante audio routing are all integrated in ControlSpace Designer.
    I/O Interfaces
  • Dante Ch: 2x2
  • 24-bit
visionary-solutions-d250l_500px|visionary-solutions-d250l_500px
  • Visionary Solutions

Visionary Solutions – D250L

2 output balanced line level Dante™ interface.  2 XLR male, 1 RJ45, PoE. 2 output balanced line level Dante™ interface.  2 XLR male, 1 RJ45, PoE.
  • 2 Channels of balanced audio output from Dante™ networks.
  • Professional Line Levels.
  • Power Over Ethernet
  • Configure with Dante™ Controller, no other software required
Distributed exclusively in the U.S. by BTX Technologies.
    I/O Interfaces