Dante-enabled Product Catalog
The Sennheiser Dante™ card for the EM 9046 receiver enables its top-of-the-range Digital 9000 microphone system to be integrated into Dante audio-over-IP networks.
The EM 9046 DAN extension card inserts into the EM 9046 eight-channel receiver expansion slot. Sixteen audio inputs can send both digital audio and command signals over the Dante network using the card. Two Gbit RJ45 sockets are provided that serve to establish two redundant network circuits or daisy-chain the signals. Sampling rates of 44.1/48/88.2 and 96 kHz at a resolution of 24 bits are possible with the card.
Download firmware for Digital 9000 Microphone System to support Sennheiser EM 9046 DAN Dante option card
The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications.
The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications. The module can be used in DYNACORD PowerH amplifier models. Installing the RCM-28 turns a conventional amp into a remote amplifier, which, at any time, provides complete overview of the overall system status and control of all system parameters. RCM-28 modules allow the integration of amplifiers into an OMNEO network with up to 100 devices in a single subnet without additional hardware. This offers the possibility to control and monitor an entire sound system from one or more PCs using the IRIS-Net - Intelligent Remote & Integrated Supervision - software package. In addition to digital signal processing functions, the RCM-28 also offers a digital audio input (AES/EBU), OMNEO network audio inputs and outputs, and freely programmable control inputs and control outputs.
The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications. The module can be used in Electro-Voice Tour Grade amplifier models. Installing the RCM-28 turns a conventional amp into a remote amplifier, which, at any time, provides complete overview of the overall system status and control of all system parameters. RCM-28 modules allow the integration of amplifiers into an OMNEO network with up to 100 devices in a single subnet without additional hardware. OMNEO is a media networking architecture for professional applications. Using standard IP Ethernets, media products that integrate OMNEO can be assembled into networks of 2 to 10,000 cooperating devices that exchange studio-quality synchronized multichannel audio and share common control systems. This offers the possibility to control and monitor an entire sound system from one or more PCs using the IRIS-Net - Intelligent Remote & Integrated Supervision - software package. In addition to digital signal processing functions, the RCM-28 also offers a digital audio input (AES/EBU), OMNEO network audio inputs and outputs, and freely programmable control inputs and control outputs.
32 in, 32 out Dante interface card for EV Netmax
32 in, 32 out Dante interface card for EV Netmax
Features:
- Connect NetMax to a Dante digital audio network
- Transmit up to 32 ins and 32 outs at 48 or 96 kHz sample rate and 16-, 20-, or 24-bit word-length
- Low latency (typically below 1 ms)
- Two Gigabit Ethernet interfaces for system redundancy
- Status LEDs for each interface
- Dante Zen device-discovery
- Compatible with Dante Virtual Soundcard
The Dante network card for PowerMatch configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate®. Eight output channels are available for diagnostic monitoring from remote locations.
The Dante network card for PowerMatch configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate®. Eight output channels are available for diagnostic monitoring from remote locations.
The Dante network card is installed into the digital expansion slot of the amplifier and includes a primary and secondary Gigabit Ethernet port. The secondary port can be configured for switched (default), redundant, or filtered for legacy product network connections. Up to 10 devices can be daisy-chained using the switched port configuration.
The Dante network card for fixed-I/O ControlSpace engineered sound processors provides 16 input and 16 output channels of low-latency digital audio using the Dante audio networking solution from Audinate®.
The Dante network card for fixed-I/O ControlSpace engineered sound processors provides 16 input and 16 output channels of low-latency digital audio using the Dante audio networking solution from Audinate®. The Dante network card is installed into the digital expansion slot of the processor and includes primary and secondary Gigabit Ethernet ports that can be configured for switched (default), redundant, isolated or filtered for legacy product network connections. Up to 10 devices can be daisy-chained using the switched port configuration.
The Digital Audio Labs Livemix LM-Dante-EXP allows the Livemix Personal Mixer to integrate seamlessly with a Dante audio network as part of the Livemix Personal Monitoring System.
The DigiCo SD-Dante-8 Module offers 8 input and 8 output channels when added to DigiGo SD racks, including the SD-Rack, SD-Mini Rack, and SD-Nano Rack. These racks support DiGiGo's SD consoles including the various versions of the SD5, SD7, SD8, SD9, SD10 and SD11 consoles.
The Studer D21m Dante card is a 64 x 64 interface between a Studer Vista or OnAir console (OnAir support with OnAir SW v6.1) and any Dante compatible device from HARMAN or other 3rd party manufacturers.
The Studer D21m DanteTM card needs a double slot in the D21m frame which is connected to the console’s core. This makes a Studer console a part of a Dante network.
Dante® Digital Interface For Ashly equipment (Factory Installed)
The KT-DANTE64 Network Module is a groundbreaking, Ethernet compliant audio networking module, compatible with the KLARK TEKNIK DN9650 and DN9652 Network Bridges.
The Dante-enabled DAN-1 digital server networking card functions as a gateway interface to support 64x64 channels of Dante networked audio.
The CDN64 Dante™ Audio Bridge Card provides third-party Dante enabled digital audio products the ability to integrate into the Q-SYS Ecosystem. It provides a bridge for up to 64 x 64 channels of Dante audio into the Q-SYS Ecosystem for advanced processing redistribution over larger LAN and WAN IT infrastructures.
The X32's expansion slot provides flexible and expandable connectivity for many different applications. The X-DANTE Expansion Card can easily be installed in place of the X-USB card that is included with the
X32. The 32-channel 48 kHz bi-directional audio interface brings even more I/O options to the X32 by making it ready for integration with Dante-enabled IP networks.
cyberTEQ – m Dante to 4xAES3 out - module is a roadworthy distribution system that uses IEEE 802.3 Gigabit-Ethernet as a backbone. The system can be used to build large production networks over huge distances by using fibre optical cables to transmit simultaneously nearly all signals used in the event technology.
The audio routing system Nexus can be equipped with a new Dante™ interface module board named XDIP which connects Nexus to IP networks running Audinate’s Dante™. The card is equipped with sampling rate converters on all 64 inputs and outputs. The integrated Ethernet switch offers 4 ports and is AVB-ready.
The
fully digital Nexus is one of most versatile audio network and routing systems on the market today and is a core product of Stage Tec, the Berlin manufacturer of professional audio mixing consoles and routers. Nexus and the router node Nexus Star are also hosts to the audio processing of Stage Tec mixing consoles such as Aurus and Crescendo.
By adding option cards to the Soundcraft Si range of digital consoles, you can interface your desk with a multitude of digital systems.
The Si range of consoles features a versatile 128 channel expansion bus offering 64 discrete additional input sources and 64 additional output patches that may be used in parallel to fan-out to multiple destinations.
Routing from the cards to the processing channels and from channels or buses to the option card buses is achieved via the ‘Patching’ functionality.
The KDL-16 is a plug in module for the SAS 32KD Digital Audio Network. The module utilizes Dante to provide 32 channels of bi-directional Audio over IP.
The RCM-28 is a dual-channel digital control module with DSP processing capability equivalent to one channel of the Electro-Voice Dx46 system processor. With an RCM-28 module installed, a Tour Grade amplifier’s network and system parameters can be completely supervised and controlled remotely through IRIS-Net.
The RCM-28 remote control module is the first EV product to support the new OMNEO media networking architecture. Tour Grade series amplifiers (such as the TG5 and TG7) with RCM-28 modules installed can be integrated into OMNEO networks of up to 100 other devices that operate over standard Ethernet with standardized protocols.
This card fits into the standard slots of the RTS ADAM or ADAM-M frames and provides a gateway to the world of OMNEO IP-compatible networking. The card consists of the traditional ADAM front and back card components.
The OKI keypanel interface cards fit into select RTS user stations and provide native OMNEO IP connectivity for RJ45 Ethernet connections into the OMNEO network with optional single or multimode fiber modules.
The NXDT104 card allows NEXO NX amplifiers to interface with a Dante network. This allows for a NEXO loudspeaker system to talk directly to a Yamaha CL mixing console via Dante.
The oratis IF Dante module supports up to 64 bidirectional audio channels. It is fully compatible with Dante’s unique plug and play network integration with automatic device discovery and system configuration. The Ethernet switch incorporated on DELEC’s Dante board is one of the few on the market which already supports the IEEE 802.1BA AVB standard. Each IF Dante board is equipped with four Ethernet ports.
AuviTran Audio ToolBox is a modular audio platform giving access to a large variety of professional audio networked configurations.
