K-array - K-dante

K-array – K-dante

Product Information

The K-dante accessory features two RJ45 ethernet connectors, that allow to connect many devices together in the same network without the need of any external ethernet switches.

The K-dante accessory features two RJ45 ethernet connectors, that allow to connect many devices together in the same network without the need of any external ethernet switches. One cable does it all. A single CAT-5e or CAT-6 can carry both the audio signal (two-channel AES/EBU) and the data to manage all the devices in the network with the K-framwork software. Dante is an uncompressed, multi-channel networking technology that allows to transmit digital audio and data across standard IP networks.

Yamaha – NY64-D

The NY64-D is an I/O expansion card for TF series consoles that allows transmission and reception of up to 128 channels (64 in/64 out) of uncompressed 48 kHz 24 bit digital audio data via a Dante™ audio network. The NY64-D is an I/O expansion card for TF series consoles that allows transmission and reception of up to 128 channels (64 in/64 out) of uncompressed 48 kHz 24 bit digital audio data via a Dante™ audio network. Used in conjunction with the Tio1608-D I/O it becomes possible to create a versatile stage box system with up to 48 inputs and 24 outputs.

Dante Interface Cards

See the product

Midas

Midas – M32

The M32 is a live performance and studio recording digital console with up to 40 simultaneous input channels. It includes 32 award-winning MIDAS microphone preamplifiers, 25 time-aligned and phase-coherent mix buses and Dante network connectivity when including the DN32-DANTE card. By installing the DN32-DANTE card in place of the DN32-USB card, your M32 will interface with Dante networks using virtually any 100Mbit/s or Gigabit Network infrastructure with DSCP-based QoS – providing dependable multi-channel audio that coexist with other IP-based data traffic on the same network. The DN32-DANTE card utilizes 24-bit signal transmission with sample-accurate synchronization and low latency, ensuring the highest audio integrity. And a secondary input allows you to set up a seamless, redundant network. Full remote control of the M32 is possible using the integrated Ethernet switch. When the DN32-DANTE card is connected to a computer, Audinate’s Dante Controller application gives you full control over configuration and signal routing among your Dante-enabled devices.

Dante Interface Cards

See the product

TASCAM

TASCAM – IF-DA64

The IF-DA64 is TASCAM's option card for TASCAM DA-6400 audio recorder/player. The IF-DA64 is TASCAM's option card for TASCAM DA-6400 audio recorder/player.

Dante Interface Cards

See the product

K-array – K-dante

Product Information

Similar Products

Yamaha – NY64-D

Midas – M32

TASCAM – IF-DA64

Support

Company

Dante Networking Alliance

K-array – K-dante

Product Information

Similar Products

Yamaha – NY64-D

Midas – M32

TASCAM – IF-DA64

I would like to receive product notices, training and event information and Dante product marketing updates via email. Opt-out at any time. For further details, including about your rights, see our Privacy Policy.