Cart
← Back to Product Catalog

Q-SYS – CDN64

Dante Interface Cards

More details

Similar Products

bosch-om-1
  • Bosch

Bosch – OM-1

The OM‑1 is a compact interface module which is prepared for a connection to an OMNEO network. The OM‑1 is able to send and receive Dante audio to and from other PAVIRO Controllers with an OM‑1 Interface Module.  The OM‑1 is a compact interface module which is prepared for a connection to an OMNEO network. The OM‑1 is able to send and receive Dante audio to and from other PAVIRO Controllers with an OM‑1 Interface Module. The transmission of up to 16 digital audio input signals and 16 digital audio output channels with low latency is possible with the OM‑1.
  • Gigabit Ethernet Interface - 1000 Mbit/s full-duplex Ethernet Interface, IEEE 802.3u compatible
  • Secondary Gigabit Ethernet Interface - Second Ethernet Interface for the connection of a redundant network to establish fault-tolerant systems
  • Status LEDs - Link, Activity and Gigabit active status indication for each Ethernet interface
    Dante Interface Cards
See the product
allen-heath-dante64
  • Allen & Heath

Allen & Heath – Dante 64×64

The Dante 64x64 card offers low latency, high channel count connectivity between dLive systems and Dante networks and devices. With 64 channels of bidirectional audio at 96kHz, the card allows high channel digital splits between systems whilst offering simultaneous multitrack recording via Dante Virtual Soundcard.The front panel Primary and Secondary ports allow simultaneous connection to multiple Dante devices, or dual-cable redundancy with compatible hardware. A dedicated Control Network port is provided for configuration using Dante Controller software.Features
    Dante Interface Cards
  • Dante Ch: 64x64
  • 24-bit
See the product
DD2_Persp-Frontal
  • Equipson

Equipson – DD2

DANTE interface with 2 inputs and 2 outputs.

Transmitter/Receiver 2IN x 2OUT of DANTE TM . The DD2 is capable of converting up to two mono analog channels to DANTE TM , or converting up to two mono DANTE TM channels to analog.

The DD2 is a device designed to be used in fixed installation, and consists of balanced inputs and outputs with 3.5mm Euroblock connectors.

The device can be powered by both PoE and an external power supply.

Characteristics

Euroblock 3.5 mm connectors for analog signal.

Configurable with DANTE Controller.

External power supply or PoE.

    Dante Interface Cards
See the product