Sennheiser - EM 9046 DAN option card

Sennheiser – EM 9046 DAN option card

Product Information

The Sennheiser Dante™ card for the EM 9046 receiver enables its top-of-the-range Digital 9000 microphone system to be integrated into Dante audio-over-IP networks.
The EM 9046 DAN extension card inserts into the EM 9046 eight-channel receiver expansion slot. Sixteen audio inputs can send both digital audio and command signals over the Dante network using the card. Two Gbit RJ45 sockets are provided that serve to establish two redundant network circuits or daisy-chain the signals. Sampling rates of 44.1/48/88.2 and 96 kHz at a resolution of 24 bits are possible with the card.

Download firmware for Digital 9000 Microphone System to support Sennheiser EM 9046 DAN Dante option card

Specifications

Dante Ch: 16x0
Bit Depth: 24-bit
Sample Rate: 44.1kHz, 48kHz, 88.2kHz, 96kHz

Audix – M3DK

The M3DK is a convenient kit that pairs the Audix M3 hanging ceiling microphone with the Audix DN43 Dante | AES67 microphone interface, providing a simple to install, network-ready way to stream Audix audio performance through Ethernet networks.

The M3 is an innovative, tri-element hanging microphone designed for applications where aesthetics, sound quality, and ease of installation are critical. The frequency response and polar pattern of its three phase-coherent hypercardioid capsules are tailored for voice clarity and rejection of extraneous noise.

The Audix DN43 interface features one microphone port engineered exclusively for the Audix M3 tri-element microphone and one port for Audix RJ45-equipped single-element microphones. Each channel has selectable, independently controlled pre-amp gain, as well as low- and high-pass filters. It features balanced audio inputs with RFI filtering and delivers high-fidelity 24-bit, 48KHz audio.

Dante Interface Cards

See the product

1073opx-digital-option-card-136-p[ekm]1000x691[ekm]

AMS Neve

AMS Neve – 1073OPX Digital Option Card

When Legend meets future. The 1073OPX Optional Digital card provides a USB and Dante AD/DA interface with eight channels of analogue to digital conversion for each 1073OPX preamp output and two channels of Digital to Analogue conversion for the digital monitor return signal path. The USB connection allows the 1073OPX to be connected to a DAW enabled PC/MAC computer to be used as a Primary/Core audio interface. In addition to the USB connection, Primary and Secondary Dante connections allow for the 1073OPX to be connected to any Dante Audio-Over-Ip network as a Dante enabled preamp. The Digital card can be retrofitted easily to any existing 1073OPX unit.

Dante Interface Cards

Dante Ch: 2x8
24-bit

See the product

Peavey MediaMatrix

Peavey MediaMatrix – MDM32

The MDM32 is a Dante Brooklyn II based 32x32 Interface card for all NION frames and the CAB4n audio bridge. The MDM32 replaces the discontinued DLM Interface and brings added Dante features such as Device Lock, support for DDM and AES67 compatibility.

Dante Interface Cards

See the product

Sennheiser – EM 9046 DAN option card

Product Information

Specifications

Similar Products

Audix – M3DK

AMS Neve – 1073OPX Digital Option Card

Peavey MediaMatrix – MDM32

Stay connected to Dante

Support

Company

Dante Networking Alliance