Dante-enabled Product Catalog

Part of the DQOR® series, the DQOR® SUB 8 D is a powered installation indoor/outdoor subwoofer with an 8" woofer and a 10" passive radiator. With a built in Dante audio connection, it easily connects to any networked audio system and is AES67 compliant for compatibility with thousands of audio devices.

Designed for high performance in a compact form factor, it delivers powerful bass audio with no need for separate amplifier racks.

Uniquely the DQOR® SUB 8 D is the only outdoor rated Dante sub bass loudspeaker available.

The clean and low-profile design ensures the DQOR® SUB 8 D is a sleek addition to any room, combining aesthetics with powerful audio performance. Rated at 190 W RMS and max power of 230 W, it delivers impressive sound quality at up to 108 dB SPL with low frequency extension down to 37 Hz.

The DQOR® SUB 8 D has rubber feet for floor mounting, or it can be easily installed with the optional surface mount bracket, which includes flexible mounting options, holes for clean cable management, locking screws, a safety-locking mechanism, and a hinge mechanism for quick setup.

AC inputs are connected with a 3-pole phoenix contact terminal block with lever push-in connector for reliable and safe connection of the power cables. Terminal block connectors allow for remote standby control. 

The DQOR® SUB 8 D can be used in a wide variety of applications both inside and outside including hospitality, retail, entertainment, or corporate settings.

It is available in black or white (RAL9005 & RAL9016).

The SoundTube Entertainment MCA10004t multichannel amplifier is Dante enabled, and allows for fixed resistance and fixed voltage output modes. At 4 ohms, this amplifier offers 1000W respectively per channel. The 4.3” LCD touchscreen on the front panel allows for easy access to gain controls, input matrixing, as well as output mode selection. The included software, STNet MCA Control, provides the user with complete control over the amplifier. This software enables the user to monitor the real-time status of the amplifier, and set up various DSP functions in real time. These DSP features include functions such as compressor, limiter, noise gate, parametric equalization, matrix router, delay, and more!

Powerful. Compact Amplification. This two-channel Class D amplifier delivers exceptional audio performance and flexibility for any AV installation. Supporting low impedance (4Ω/8Ω) stereo systems with 2 x 75W output or bridged constant voltage (70V/100V) systems at 150W, it adapts effortlessly to various speaker setups. Featuring Dante 2CH digital I/O, balanced or unbalanced analog I/O, built-in DSP, and flexible control options, it’s the perfect solution for installations that demand reliability and precision.

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA24/LP² delivers 24×50W @4 Ω in only 1U of rack space.

The SoundTube Entertainment MCA7004t multichannel amplifier is Dante enabled, and allows for fixed resistance and fixed voltage output modes. At 4 ohms, this amplifier offers 700W respectively per channel. The 4.3” LCD touchscreen on the front panel allows for easy access to gain controls, input matrixing, as well as output mode selection. The included software, STNet MCA Control, provides the user with complete control over the amplifier. This software enables the user to monitor the real-time status of the amplifier, and set up various DSP functions in real time. These DSP features include functions such as compressor, limiter, noise gate, parametric equalization, matrix router, delay, and more!

The Origin PRO 1RU amplifiers offer a combination of small size and high power per channel flexibility, making them ideal for installing in commercial applications which demand a variety of outputs. The required power can be utilized where needed – with both Hi-Z and Lo-Z simultaneously, to fit all needs, and all easily set up through the Origin PROTM amplifier web app user interface. Personalize your system to deliver the power required, with 1-2 channels in Hi-Z or 2-4 in Lo-Z to cover any room size. Origin PRO Amplifiers are backed up with a 5-year warranty.

The Origin PRO 1RU amplifiers offer a combination of small size and high power per channel flexibility, making them ideal for installing in commercial applications which demand a variety of outputs. The required power can be utilized where needed – with both Hi-Z and Lo-Z simultaneously, to fit all needs, and all easily set up through the Origin PROTM amplifier web app user interface. Personalize your system to deliver the power required, with 1-2 channels in Hi-Z or 2-4 in Lo-Z to cover any room size. Origin PRO Amplifiers are backed up with a 5-year warranty.

The Origin PRO 1RU amplifiers offer a combination of small size and high power per channel flexibility, making them ideal for installing in commercial applications which demand a variety of outputs. The required power can be utilized where needed – with both Hi-Z and Lo-Z simultaneously, to fit all needs, and all easily set up through the Origin PROTM amplifier web app user interface. Personalize your system to deliver the power required, with 1-2 channels in Hi-Z or 2-4 in Lo-Z to cover any room size. Origin PRO Amplifiers are backed up with a 5-year warranty.

The Origin PRO 2RU amps offer a combination of small size and high power per channel flexibility, making them ideal for installing in commercial applications which demand a variety of outputs. The required power can be utilized where needed – with both Hi-Z and Low-Z simultaneously, to fit all needs, and all easily set up through the Web App user interface. Personalize your system to deliver the power required, with 1-2 channels in Hi-Z or Low-Z to cover any room size. Origin PRO Amplifiers are backed up with a 5-year warranty.

The Origin PRO 2RU amps offer a combination of small size and high power per channel flexibility, making them ideal for installing in commercial applications which demand a variety of outputs. The required power can be utilized where needed – with both Hi-Z and Low-Z simultaneously, to fit all needs, and all easily set up through the Web App user interface. Personalize your system to deliver the power required, with 1-2 channels in Hi-Z or Low-Z to cover any room size. Origin PRO Amplifiers are backed up with a 5-year warranty.

The Origin PRO 2RU amps offer a combination of small size and high power per channel flexibility, making them ideal for installing in commercial applications which demand a variety of outputs. The required power can be utilized where needed – with both Hi-Z and Low-Z simultaneously, to fit all needs, and all easily set up through the Web App user interface. Personalize your system to deliver the power required, with 1-2 channels in Hi-Z or Low-Z to cover any room size. Origin PRO Amplifiers are backed up with a 5-year warranty.

The Origin PRO 2RU amps offer a combination of small size and high power per channel flexibility, making them ideal for installing in commercial applications which demand a variety of outputs. The required power can be utilized where needed – with both Hi-Z and Low-Z simultaneously, to fit all needs, and all easily set up through the Web App user interface. Personalize your system to deliver the power required, with 1-2 channels in Hi-Z or Low-Z to cover any room size. Origin PRO Amplifiers are backed up with a 5-year warranty.

The Origin PRO 1RU amplifiers offer a combination of small size and high power per channel flexibility, making them ideal for installing in commercial applications which demand a variety of outputs. The required power can be utilized where needed – with both Hi-Z and Lo-Z simultaneously, to fit all needs, and all easily set up through the Origin PROTM amplifier web app user interface. Personalize your system to deliver the power required, with 1-2 channels in Hi-Z or 2-4 in Lo-Z to cover any room size. Origin PRO Amplifiers are backed up with a 5-year warranty. Your Name: Jeremiah Dancel

The Connect Series 64D delivers one of the most feature-rich amplifier experiences available in the industry – in a smaller form factor. Featuring 96kHz DSP, WebUI, SharkWare, LEA Cloud, third-party APIs, speaker tunings, and more, this amplifier is the right choice for your next install. Each of the half-rack models (CS34, CS64, CS124, CS34D, CS64D, and CS124D) are built with fully routable analog inputs, four amplifier channels with Lo-Z, 70V, or 100V selectable by channel and D-units include Dante and AES67 connectivity. All models boast three different ways of network connection: using the built-in Wi-Fi Access Point, connecting to an existing Wi-Fi network, or using a Local Area Network Ethernet connection.

The Connect Series 124D delivers one of the most feature-rich amplifier experiences available in the industry – in a smaller form factor. Featuring 96kHz DSP, WebUI, SharkWare, LEA Cloud, third-party APIs, speaker tunings, and more, this amplifier is the right choice for your next install. Each of the half-rack models (CS34, CS64, CS124, CS34D, CS64D, and CS124D) are built with fully routable analog inputs, four amplifier channels with Lo-Z, 70V, or 100V selectable by channel and D-units include Dante and AES67 connectivity. All models boast three different ways of network connection: using the built-in Wi-Fi Access Point, connecting to an existing Wi-Fi network, or using a Local Area Network Ethernet connection.

The Connect Series 34D delivers one of the most feature-rich amplifier experiences available in the industry – in a smaller form factor. Featuring 96kHz DSP, WebUI, SharkWare, LEA Cloud, third-party APIs, speaker tunings, and more, this amplifier is the right choice for your next install. Each of the half-rack models (CS34, CS64, CS124, CS34D, CS64D, and CS124D) are built with fully routable analog inputs, four amplifier channels with Lo-Z, 70V, or 100V selectable by channel and D-units include Dante and AES67 connectivity. All models boast three different ways of network connection: using the built-in Wi-Fi Access Point, connecting to an existing Wi-Fi network, or using a Local Area Network Ethernet connection.

• Four channels of efficient Class D amplification
• High power density in 2U rack height
• Up to 6,000 Watts total power output, depending on load impedance
• High performance 96kHz DSP on all inputs and outputs (48kHz on outputs when implementing FIR filters)
• Switch mode power supply
• Global mains operation, 85V to 240V auto-sensing
• Intuitive, user-friendly, front panel interface
• Analogue, AES3 and Dante™ (AES67 compatible) digital audio network inputs
• Ethernet network for system operation, control and monitoring via Martin Audio VU-NET™ software
• Comprehensive protection and monitoring functions

he PowerZone™ Connect 1U series is a line of DSP-enabled Class-D amplifiers designed to simplify the lives of system installers, providing unmatched reliability, efficiency, and exceptional system configuration. Their compact form factor makes them an ideal choice for audio/voice installation projects with limited space constraints, demanding high-output performance of up to 1000 W. The 1U family powers both conventional low-impedance (4 Ω to 16 Ω) loudspeakers and constant voltage (70 V/100 V) transformer-coupled loudspeakers, and features automatic power-sharing technology for proportional distribution in both Lo-Z and Hi-Z modes. Specific models of the PowerZone™ Connect 1U amplifiers offer compatibility with Audinate Dante™ AoIP networks and installations. Our intuitive PowerZone™ Control web app is built into all our PowerZone™ Connect amplifiers for easy system setup. PowerZone™ Control facilitates effortless customization of even the most challenging audio/voice systems by delivering many DSP configuration options and tuning features, including multizone setup, input mixing, priority and ducking, restriction, input and output EQ, S/PDIF output routing, high-pass filter, speaker presets, delay, Wall-S1 controller configuration, Sine generator, and much more.

The PowerZone™ Connect 2U series is a line of ultra-reliable, full-matrix DSP-enabled Class-D amplifiers that delivers exceptional system configuration and flexible output, with a total system power ranging from 1000 W to 6000 W. The PowerZone™ Connect 2U series powers both conventional low-impedance (2 Ω to 16 Ω) loudspeakers and constant voltage (70 V/100 V) transformer-coupled loudspeakers, and features proportional distribution in both Lo-Z and Hi-Z modes. Specific models of the PowerZone™ Connect 2U amplifiers offer compatibility with Audinate Dante™ AoIP networks and installations. Our intuitive PowerZone™ Control web app is built into all our PowerZone™ Connect amplifiers for easy system setup. PowerZone™ Control facilitates effortless customization of even the most challenging audio/voice systems by delivering many DSP configuration options and tuning features, including multizone setup, input mixing, priority and ducking, restriction, input and output EQ, S/PDIF output routing, high-pass filter, speaker presets, delay, Wall-S1 controller configuration, Sine generator, and much more.

Bijou Series Five-Channel Integrated Amplifier with Line-level Subwoofer Output and Dante Audio

• HDMI eARC input transfers uncompressed high-bandwidth source audio, including Dolby Atmos, Dolby TrueHD, and DTS-HD Master Audio.
• GaN-based high-power, hyper-performance, Class-D amplifier design
• 65 W into 8 Ω, 130 W into 4Ω, all channels driven
• Dante audio networking support
• Analog and Digital Inputs; Analog Stereo Preamp and Subwoofer outputs
• IP and IR-Controllable for seamless third-party automation compatibility

The PC-D / DI series are so much more than just high power amplifier. The impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard. PC-D / DI series are also compatible with ProVisionaire Touch and ProVisionaire Control, and we can provide customized remote controls if required. 600W x 4 at 8Ω.

• 4 x 600W at 8Ω
• 20 x 8 powerful input matrix function
• Sampling frequency is up to 96k
• 16ch Dante input/output
• Speaker processor such as 16 band PEQ, crossover, filters, delay and limiter
• Yamaha speaker presets
• Remote control via ProVisionaire Touch/Control

The PC-D / DI series are so much more than just high power amplifier. The impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard. PC-D / DI series are also compatible with ProVisionaire Touch and ProVisionaire Control, and we can provide customized remote controls if required. 600W x 4 at 8Ω.

• 4 x 600W at 8Ω
• 20 x 8 powerful input matrix function
• Sampling frequency is up to 96k
• 16ch Dante input/output
• Speaker processor such as 16 band PEQ, crossover, filters, delay and limiter
• Yamaha speaker presets
• Remote control via ProVisionaire Touch/Control

The PC-D / DI series are so much more than just high power amplifier. The impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard. PC-D / DI series are also compatible with ProVisionaire Touch and ProVisionaire Control, and we can provide customized remote controls if required. 1200W x 4 at 8Ω. Switchable for low and high impedance speaker systems.

• 4 x 1200W at 8Ω, 4 x 1200W at 100V/70V
• 20 x 8 powerful input matrix function
• Sampling frequency is up to 96k
• 16ch Dante input/output
• Speaker processor such as 16 band PEQ, crossover, filters, delay and limiter
• Yamaha speaker presets
• Remote control via ProVisionaire Touch/Control

The PC-D / DI series are so much more than just high power amplifier. The impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard. PC-D / DI series are also compatible with ProVisionaire Touch and ProVisionaire Control, and we can provide customized remote controls if required. 1200W x 4 at 8Ω.

• 4 x 1200W at 8Ω
• 20 x 8 powerful input matrix function
• Sampling frequency is up to 96k
• 16ch Dante input/output
• Speaker processor such as 16 band PEQ, crossover, filters, delay and limiter
• Yamaha speaker presets
• Remote control via ProVisionaire Touch/Contro

Delta Series offers  the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking (optional).

Digital microphone mixing system of the most modern design with Dante network structure and 2 digital power amplifiers, The processor-controlled device of the latest generation represents the optimal synthesis of excellent transmission quality, minimum operating effort and maximum ease of use.

The XT series is a new generation of amplifiers offering high voltage output for high headroom sound, with 64 bit double-precision 96kHz DSP processing, and an advanced power management to squeeze the last watts out of your speakers.