CS354D

CS354D

Product Information

The CONNECTSERIES 354D is a 4-channel amplifier with 350 watts per channel. As part of the Dante CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for small to medium-scale installations. The 354D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable.

Then there’s the Cloud…DANTE CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems. Register for your free LEA Cloud account at leaprofessional.cloud

The DANTE CONNECTSERIES also features analog inputs and Dante inputs and external I/O control for remote on/off and fault monitoring.

Kling & Freitag – D 80:4

The K&F D80:4, K&F D120:4 and K&F D200:4 are mainly suitable for the installation field. These models cover different performance classes and come with a variety of innovations. RPM (rational power management) provides the flexibility to assign different power to each of the four output channels - this removes the need for a bridge operation later on. Other features include PFC (power factor correction), universal power adapters and various inputs - Dante (primary and secondary), AES and analogue. Based on the newly developed Lake core modules and exclusive K&F module pre-sets, the high-performance power amps that are fitted with red front panels will be able to operate all standard K&F systems in future.

Amplifiers

See the product

Dynacord

Dynacord – IPX5:4

Dynacord's IPX5:4 is a 4 x 1250 W multi-channel installation DSP amplifier. Dynacord's IPX5:4 is a 4 x 1250 W multi-channel installation DSP amplifier.

4 x 1250 W multi-channel installation DSP amplifier with digitally controlled PFC supply
Fully integrated DSP with high-resolution 96 kHz processing and FIR Drive
Dante and OCA integration via OMNEO with fallback options
Parallel, bridged and parallel-bridged drive modes with 70/100V and low impedance operation
High efficiency Eco Rail technology for lower operating costs

Amplifiers

See the product

Biamp

Voltera – D-1200-8

8-channel amplified loudspeaker controller, 1200 watts total power. Key Features

Audio DSP and amplified loudspeaker controller plus some headroom for Tesira custom processing and hosting of expanders
4 class D channels sharing 1200 watts
Power sharing provides up to 50% of total power or 1200 W through any single channel
High peak voltage output capability: 145 Vpk
Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
Each model supports AVB, Dante, and AES67
Accurate raised cosine EQ below 160 Hz
Group-controlled raised cosine EQ making it attractive for tuning large systems
Comprehensive amplifier limiter scheme avoids protective mutes and shutdowns
Processor can be sustained through POE – no main power required and no reboots
Support for failover-to-analog from networked audio input operation
5-year warranty
Compliant with the US Trade Agreement Act (TAA)
Biamp Workplace Ready

Amplifiers

See the product

Product Information

Similar Products

Kling & Freitag – D 80:4

Dynacord – IPX5:4

Voltera – D-1200-8

Support

Company

Dante Networking Alliance

CS354D

Product Information

Similar Products

Kling & Freitag – D 80:4

Dynacord – IPX5:4

Voltera – D-1200-8

I would like to receive product notices, training and event information and Dante product marketing updates via email. Opt-out at any time. For further details, including about your rights, see our Privacy Policy.